[VU+ Duo2] Different remote button actions

[Trial]

Hi,
it should be a driver/hardware problem. With reliable I mean the information you get. As I said with only gstreamer sometimes frequency or other information was wrong and this means that AutoResolution or Multi for frequency could not work reliable.

ciao

 

[Lothar2]

it should be a driver/hardware problem.

Can Ubi-Error have something to do with that my box behaves differently?

 

[Trial]

Hi,
what ubi-error? ubi is the file system of the flash and can be cause of funny behavior.

ciao

 

[Lothar2]

But, if "UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16" mean "define EBUSY 16 /* Device or resource busy */" then i must have no flash, or?

is this ok so?:

root@vuduo2:~# df -h                                                  
Filesystem                Size      Used Available Use% Mounted on    
ubi0:rootfs             862.3M    143.6M    718.7M  17% /             
devtmpfs                687.4M      8.0K    687.4M   0% /dev          
tmpfs                    64.0K         0     64.0K   0% /media        
/dev/sda1               931.1G    605.5G    325.6G  65% /media/hdd    
/dev/sdb1                 7.2G    292.5M      6.9G   4% /media/usb    
tmpfs                   687.5M    320.0K    687.2M   0% /var/volatile

root@vuduo2:~# free -m                                                     
             total       used       free     shared    buffers     cached  
Mem:          1375        229       1145          0          8         76  
-/+ buffers/cache:        143       1231                                   
Swap:            0          0          0

Next i have time i will see in dmesg in VTI if there is the same massage.

 

[Trial]

Hi,
I think this means that it is mounted and no thing to worry about.

ciao

 

[Lothar2]

Hi Lothar2,
you have a very funny box. Are you sure that it is an original Duo2? The routines that make problems on your machine are >1 year old and beside me there are some other Duo2 user which use OpenViX. Same reason different file. Try attached converter.

ciao

Hello Trial,

after Update to 095 the invalid literal for int() with base 16: '' is back. Have the Update change ServiceInfo.pyo back to unfixed dafault? Is fixed in 097?
At this Time the crash occurs my wife only would select a other Channel from Channellist.

 

[Lothar2]

and after update to build 097 the same failure come back. this time i have play a file from RTLnow.