AB-Com PULSe 4K SE. Crazy offer only £129! FREE UK DELIVERY!
Superb quality and spec AB-Com PULSe 4K SE. Crazy offer! Only £129! FREE UK DELIVERY! 4K UHD, Enigma 2, Multiboot 4 images & more!...
AB-Com PULSe 4k Rev II Twin tuner only £179! FREE UK DELIVERY!
Superb quality and spec AB-Com PULSe 4K Rev II Twin Satellite tuner only £179! FREE UK DELIVERY! 4K UHD, Enigma 2, SATA HDD facility, Multiboot 4 images & more!...

DTT EPG not updating on 2.2

G

guff daddy

Forum Supporter ,
Joined
Apr 8, 2010
Messages
319
Reaction score
2
Points
0
I have a Hauppauge Nova-T tuner which works fine in 2.2 - however on v2.0 and 2.1 the 5 day EPG was automatically updated when tuning to one of the channels (Irish DTT channels). This isn't working on v2.2 (I've enabled EIT, MHW etc in the EPG Settings). Anyone else having this problem?
 
This is a RTENL problem, not a Vix problem. They have changed something since full public launch. Many different non certified saorview receivers are experiencing same problem.
 
Thanks for that - yep, just checked on my DM800 and it has the same problem. Just hadn't noticed until today.
 
Did anyone get any reply from Saorview to confirm any of this.
 
I contacted SAORVIEW and below is the reply - not massively helpful...


I consulted with our technician and also the RTÉ Networks team. They informed me that no changes have been made to the configuration of the EPG in the last few weeks and since USB devices are not approved receivers we cannot offer any additional insight.

My advice would be to consult the retailer where you bought the USB receiver as they may be able to help you further.

Best regards,

Jennie
The SAORVIEW Team
 
guff daddy said:
I contacted SAORVIEW and below is the reply - not massively helpful...


I consulted with our technician and also the RTÉ Networks team. They informed me that no changes have been made to the configuration of the EPG in the last few weeks and since USB devices are not approved receivers we cannot offer any additional insight.

My advice would be to consult the retailer where you bought the USB receiver as they may be able to help you further.

Best regards,

Jennie
The SAORVIEW Team
Click to expand...

thanks for contacting them guffdaddy. but it does appear that although their pr department are saying that nothing has changed, that they have changed something. walker and other official saorview receivers are recieving the full 7 day guide and my samsung tv {supposedly soon to be certified} works perfect but there are reports of triax, vu+, technomate and others not working so it appears they have changed something in the broadcast epg stream to affect uncertified boxes {although maybe unknowingly}
 
irishchris said:
thanks for contacting them guffdaddy. but it does appear that although their pr department are saying that nothing has changed, that they have changed something. walker and other official saorview receivers are recieving the full 7 day guide and my samsung tv {supposedly soon to be certified} works perfect but there are reports of triax, vu+, technomate and others not working so it appears they have changed something in the broadcast epg stream to affect uncertified boxes {although maybe unknowingly}
Click to expand...

Just for fun, I stuck the Hauppauge back into my PC, reinstalled the WinTV software (after much searching for the CD) and the EPG worked perfectly even though this is obviously an uncertified setup.

I also tried both the latest BlackHole and Sifteam Gecko images on my VU+ - both also have the same problem. Is it confined to Enigma2 receivers?

Do you think there would be any chance of Rytec providing this as an xmltv download or is the market too small?
 
Last edited:
guff daddy said:
Just for fun, I stuck the Hauppauge back into my PC, reinstalled the WinTV software (after much searching for the CD) and the EPG worked perfectly. Is it therefore confined to Enigma2 receivers?
Click to expand...

afraid not as there are non e2 boxes, people with dvbviewer and htpcs with the same problem.
one person has reported the error as "the lanauge descriptor is set to "ENG" where it should be set to "eng". This is causing the problem, at least in my case"
 
Update -

Just got message from Rytec Guys that they have added RTE1, RTE1+1, RTE2, TV3 , TG4 and 3e for the Terestrial Channels EPG to sort out the current issue.
They cant find any epg for RTEjr or RTE News Now.
They advise disabling EIT in setup first to stop the over the air epg on saorview.

Note this has only been done in the last few hours (well done Rytec guys) so it all needs to be tested.

I will check in the morning and report back.

At least it gives us an option until we find out whats up with the Saroview EPG for us.

D
 
Just tried it and it works pretty well. RTE 1 +1 is patchy as is RTE News Now. But main five channels are full up to 2am Tuesday morn. RTE actually go further into tuesday.
 
how is rte 2 looking for monday - on mine yesterday it only listed 4 programs and skipped to tuesday
 
How did you do this - did you update the Rytec providers in CrossEPG, or what?
 
Its full for Monday. Did this not start today, i thought? For Dtt that is?
 
Disabled EIT and Open tv, then selected Rytec Uk and downloaded.
 
gipo said:
Disabled EIT and Open tv, then selected Rytec Uk and downloaded.
Click to expand...

OK - but you can leave OpenTV enabled and change the provider order so that Rytec downloads first; the OpenTV download will overwrite all the Rytec stuff except the DTT channels.
 
All.

Am testing the Rytec DTT updates for DTT but cant clear the EPG. Using XMLTV-Importer.
I delete the epg.dat and reboot and it appears back straight away with the dat I had before I deleted it.
Is there a new way to clear the EPG on VIX now.
 
Have you disabled EIT? If so, try deleting the epg.dat and then just power off (rather than an orderly shutdown).
 
Did that and the epg.dat reappears when I reboot. Its not downloading the data as its there staight away.
Is the EPG data on ryvix downloaded somewhere else and then populated into the epg.dat (like the crossepg folder)

Also how can i update the source files etc from rytec where he has incorporated these DTT epg details.

Yes I have EIT diabled.
 
I remember having a similar problem trying to get rid of EPG data - the stuff just kept coming back to life! In the end I searched the HDD, USB and flash for epg.dat and deleted everyone I found, deleted the CrossEPG folders wherever I found them and just powered off and on again and that did it.

Why not use CrossEPG rather than XML importer? You can update the providers from the CrossEPG menu, then download the Rytec UK data.
 
You must log in or register to reply here.

OpenViX Feeds Status

Back
Top