Superb quality and spec AB-Com PULSe 4K SE. Crazy offer! Only £99! FREE UK DELIVERY! 4K UHD, Enigma 2, Multiboot 4 images & more!...
Superb quality and spec AB-Com PULSe 4K Rev II Twin Satellite tuner only £149! FREE UK DELIVERY! 4K UHD, Enigma 2, SATA HDD facility, Multiboot 4 images & more!...

Flashed latest bootloader, no picture or sound via HDMI

  • Thread starter Thread starter Eiji
  • Start date Start date
E

Eiji

Guest
I flashed the latest bootloader as I was having image problems via HDMI as mentioned in the thread below:

http://www.world-of-satellite.com/showthread.php?47318-Random-green-flashes-when-watching-channels

Now I have no picture or sound via HDMI. I have tried different HDMI cables, different images and different versions of the bootloader but still have the same problem.

I noticed when I flash an image, it says on the box display that flashing has completed whereas when I flash a bootloader it says "flashing" and then changes straight to "hd2400" after about 10 seconds without it saying the flash is successful. I flash the bootloader by pressing the V button on the front of the box.

I can get picture and sound from the SCART output of the box but image quality is stuck at SD 576p :(

Any idea what's wrong?

Thanks.
 
Faulty hdmi port by the sounds of it, when flashing bootloader it will only take a few seconds to complete,
 
surprised if its the hdmi port. after flashing boatloader did you flash image???????
 
surprised if its the hdmi port. after flashing boatloader did you flash image???????

Yes, I tried various images like Stock, OpenVix, OpenATV etc and all give black screen and no audio through HDMI.
 
When flashing bootloader you have to press the down arrow button as opposed to the up arrow when flashing an image.

Stupid question I know but you have got the cable plugged in to the HDMI out and not HDMI in ?
 
Yes, the cable is in the HDMI-OUT port and I pressed the V button on the front panel to flash the bootloader. I'm going to contact the retailer to sort this out.
 
Send it back if poss, I had a similar problem so perhaps there is a faulty batch? if you can swap it for a Xtrend 10000:thumbsup:
 
is your tv capable of the full hd as i know i once flashed my parents box at my house and took it to theres when i got there the screen was black and it took me a while to figure out there tv was only 720 not 1080
 
This happened me and the solution was to use a 2gb( no Bigger) flash drive for flashing. That sorted it for me
 

OpenViX Feeds Status

Back
Top