[VU+ Uno4KSE] Got a loop when hard reboot. Vix 6.8

[bmitie]

What type of support thread are you creating?

Support question

What OpenViX Image build number are you using?

6.8

Have you tried re-flashing WITHOUT settings restore?

NO

Have you tried re-flashing WITH a settings restore?

NO

I wanted to test another box so put Uno4kse on standby and removed sat 1 cable and usb tuner. Left in standby for 24 hours . Switched cables back and get a loop.

This is the error, which I have never encountered before/

 

[abu baniaz]

No space left on the storage device where image is installed.

 

[bmitie]

But how do I get box back working?? Images are on HDD. I have it on multiboot. Cant FTP or switch image, its just stuck but pretty sure there is space its a 500gb ssd.

Like I said never came across this ever in years. Is the only option to try a re-flash?

 

[Orlandox]

I think the flash memory has no space left.

 

[twol]

But how do I get box back working?? Images are on HDD. I have it on multiboot. Cant FTP or switch image, its just stuck but pretty sure there is space its a 500gb ssd.

Like I said never came across this ever in years. Is the only option to try a re-flash?

So with that error, you should still be able to telnet into the box and ftp.
You probably need to do a scan on your router to see what ip address has been allocated.
then find /boot and depending on image slot, you will see the STARTUP files…..copy working STARUP slot nto PC, rename STARTUP and copy back.

 

[bmitie]

will try now. Ok I think I may have made a cockup. Went to boot and as you will see I have quite a few startups!! I picked the end at end, moved to pc, but as it was startup I renamed it startup and copied back. I think I then did a reboot and as nothing was happening I had the bright idea to delete the lot and picture came back but I had forgotten to put in HDD. Put HDD and it was recognised but did not appear as storage, did a reboot but forgot boot directory was empty and all I have now is the VU+ splash screen. Is it a reflash now.

 

[dsayers]

Do you have EPG importer running on a schedule?

If you do EPG might have filled up your space with no storage device connected

 

[bmitie]

Phew, all good again. In desperation I re flashed but removed hdd, lan cable, usb tuner, before hand and used a cruzer USB it worked and I restored settings and all came back but at the moment NICAM wont run and a few entries missing on epg. Quite pleased all my plugins came back and image is just as it was previously but 6.9 now. The HDD has 317gb free of 500gb. I messed up by leaving box on standby and removing sat cables and usb tuner. I should have powered off at rear. Wont happen again.

For epg I only use opentvdownloader runs, thursday, then for iptv, importer but only when required, its set disabled.

Something happened when cables were unplugged and caused the glitch.