Superb quality and spec AB-Com PULSe 4K SE. Crazy offer! Only £129! FREE UK DELIVERY! 4K UHD, Enigma 2, Multiboot 4 images & more!...
Superb quality and spec AB-Com PULSe 4K Rev II Twin Satellite tuner only £179! FREE UK DELIVERY! 4K UHD, Enigma 2, SATA HDD facility, Multiboot 4 images & more!...

GT-Sat GT-S3DCSS24 SCR Purchased July 2021 - Now no signal

artful

Member
Joined
Feb 7, 2011
Messages
31
Reaction score
0
Points
6
Location
Northeast UK
I purchased this from the sponsor in July 2021 and it's been working fine, connected to one LG TV, a Wu+ Solo4K and a Vu+ Solo2.
A few days ago I'm getting no signal on all tuners (real & virtual) so trying to determine why, primarily thinking it's the LNB that's failed.
I don't use the legacy connections.
Has anyone else had a similar problem ?
 
I purchased this from the sponsor in July 2021 and it's been working fine, connected to one LG TV, a Wu+ Solo4K and a Vu+ Solo2.
A few days ago I'm getting no signal on all tuners (real & virtual) so trying to determine why, primarily thinking it's the LNB that's failed.
I don't use the legacy connections.
Has anyone else had a similar problem ?

Bad weather - dish moved? Water in cable? Loose connectors
 
Well, could be but the dish is very secure, however, to avoid trees I had to locate it close the the roof ridge on the gable end and later had to get rid of the 5m twin ladders after we moved here in 2021 so now can't access it myself. We've had much stronger winds than lately with no problem. On recollection there's been a few times over the past year when I've lost signal then the following day it's been okay. I read somewhere that this GT-Sat Unicable LNB can stop working in extreme cold. However, it's not a simple situation considering my setup - see attached distribution arrangement - it's all worked perfectly up until now. The satellite tuner in the living room (LR) TV is connected to the Sat2 connector on the S1440 so not multiplexed and I'm getting no signal on that. The terrestrial side is working on all devices.

Sat & TV Wiring Diagram.webp
 
Last edited:
Your best bet is call someone with a meter because without one you are working blind.
 
Well, could be but the dish is very secure, however, to avoid trees I had to locate it close the the roof ridge on the gable end and later had to get rid of the 5m twin ladders after we moved here in 2021 so now can't access it myself. We've had much stronger winds than lately with no problem. On recollection there's been a few times over the past year when I've lost signal then the following day it's been okay. I read somewhere that this GT-Sat Unicable LNB can stop working in extreme cold. However, it's not a simple situation considering my setup - see attached distribution arrangement - it's all worked perfectly up until now. The satellite tuner in the living room (LR) TV is connected to the Sat2 connector on the S1440 so not multiplexed and I'm getting no signal on that. The terrestrial side is working on all devices.

View attachment 67093

If you think Northern UK is cold, come to sunny Bavaria (should be -8C at weekend with more snow), the GT-SAT works fine
 
I have known the splitters to fail. Try bypassing it with a barrel connector to supply one of the faceplates, ideally the direct one in LR so you cause minimum disruption to wiring.

PS. A dscr/unicable switch would have been a better choice as there are fewer components in the chain. Most use quattro LNBs, but some use quad or wideband LNBs too
 
@abu baniaz

Yes, I intend to do that, just been too busy with Christmas preparations at the moment, it's not critical as I've got IPTV.
 
@abu baniaz

Yes, I intend to do that, just been too busy with Christmas preparations at the moment, it's not critical as I've got IPTV.

Well, later on Tuesday I tried that and got no signal.

Then, miraculously later yesterday I noticed on the Vu Solo4K display that it had tuned in so checking both Vu Solo4K and Solo 2 boxes discovered all channels were fully working with typical SNRs of 98% as previous (I have a stage 2 Sly dish).

All this without any intervention from me so totally unexplained. All that's changed is the weather is warmer !!
 
As @twol posted earlier, a likely explanation is water in the system somewhere - inside the LNB or the cable connector(s). A few days of drier weather and the moisture may have reduced sufficiently to allow a signal to pass. You need to get the connections inspected and the dish re-aligned if necessary.
 
With an SNR of around 98% and an AGC of around 80% I doubt if the dish needs realigning and it's very firmly fixed.

There's only one external connector to the LNB and it's shrouded, all installed by me a little over 3 years ago so I believe the only possible moisture ingress is the LNB itself and presumably it should be sealed, everything else is inside. The external cable to the LNB is around a metre long. The recent weather hasn't been dry, maybe a little less rain but still very damp and light rain here in the northeast, however, it is warmer than the really cold spell we had.
 
There's only one external connector to the LNB and it's shrouded, all installed by me a little over 3 years ago so I believe the only possible moisture ingress is the LNB itself and presumably it should be sealed, everything else is inside.

A little older than 3 years ...
https://www.world-of-satellite.com/showthread.php?65013-LNB-failure#6

Water can get into cable with an air spaced dialectic if the rain cover on the LNB has not been pulled down or if the exposed F connector hasn't been covered with a protective boot or wrapped in self amalgamating tape.
 

OpenViX Feeds Status

Back
Top