A
anparry
Guest
Hi, I have recently purchased a Technomate TM Nano OE, but I can't seem to find the location of the var/keys folder, has anyone else come across this issue or can anyone offer any advice?
Superb quality and spec AB-Com PULSe 4K SE. Crazy offer! Only £129! FREE UK DELIVERY! 4K UHD, Enigma 2, Multiboot 4 images & more!...
Superb quality and spec AB-Com PULSe 4K Rev II Twin Satellite tuner only £179! FREE UK DELIVERY! 4K UHD, Enigma 2, SATA HDD facility, Multiboot 4 images & more!...
[TM-NANO-OE] I can't seem to find the var/keys location on my Technomate TM Nano OE
A
anparry
Guest
Is this Technomate's version of var/keys?
A
anparry
Guest
Hi, thanks for your advice! I am new to this so it's really appreciated.
So another daft question - If I use the usr/keys on my technomate, that is just the equivalent of using var/keys on another machine? I guess I'm just checking that I don't need to do anything additional as well?
So another daft question - If I use the usr/keys on my technomate, that is just the equivalent of using var/keys on another machine? I guess I'm just checking that I don't need to do anything additional as well?
abu baniaz
Moderator
E1 receivers use /var/
E2 receivers use /usr/
No need for additional steps.
E2 receivers use /usr/
No need for additional steps.
A
anparry
Guest
I have a new Technomate Nano OE satellite receiver, but I am getting an error message when trying to set things up, which says ‘No config files found, please set up MGcamd first in var/keys
I currently have 2 files 1 called CCam.cfg and 1 called newcamd.list, from looking at various forums I have a feeling that I may have named these incorrectly? Or do I need to create any additional files?
Can anyone offer any advice please?
I currently have 2 files 1 called CCam.cfg and 1 called newcamd.list, from looking at various forums I have a feeling that I may have named these incorrectly? Or do I need to create any additional files?
Can anyone offer any advice please?
abu baniaz
Moderator
He has not transferred mg_cfg. Whether it is /var/keys/ or /usr/keys/ is irrelevant, he will be directed to correct place (/usr/keys).
Install Mgcamd from feeds to ensure you are installing correct one. Menu > Plugins> green for download> softcams> mgcamd 1.38
Transfer the config files from here http://www.world-of-satellite.com/showthread.php?24555-original-vu-duo&p=182712#post182712 or http://www.world-of-satellite.com/s...h-Cable-Set-up&p=306359&viewfull=1#post306359
We only help with cards in receivers here.
Install Mgcamd from feeds to ensure you are installing correct one. Menu > Plugins> green for download> softcams> mgcamd 1.38
Transfer the config files from here http://www.world-of-satellite.com/showthread.php?24555-original-vu-duo&p=182712#post182712 or http://www.world-of-satellite.com/s...h-Cable-Set-up&p=306359&viewfull=1#post306359
We only help with cards in receivers here.
I know this is a difficult area to discuss because of forum rules.
In the places where this topic is discussed freely they frequently talk about putting mg.cfg in /var/keys/ - I was giving a portmanteau answer which would be helpful to a newcomer to this subject.
In the places where this topic is discussed freely they frequently talk about putting mg.cfg in /var/keys/ - I was giving a portmanteau answer which would be helpful to a newcomer to this subject.
abu baniaz
Moderator
But on E2 images, there is no /var/keys/. The fact some "programs" still mention /var/keys is the confusing bit. Not the fact that there are symlinks in images. The symlinks make the following scenario true.
Virtual location: /var/keys/
Real location: /usr/keys/
Anything looking at /var/keys/ will be directed to /usr/keys/ and will function correctly. If there was no symlink, it will look at a non-existent location and fail. Try it on any of your images. See where you end up when you type /var/keys in your ftp address bar.
Virtual location: /var/keys/
Real location: /usr/keys/
Anything looking at /var/keys/ will be directed to /usr/keys/ and will function correctly. If there was no symlink, it will look at a non-existent location and fail. Try it on any of your images. See where you end up when you type /var/keys in your ftp address bar.
A
anparry
Guest
Hi, thanks for your advice, much appreciated. I now understand that I need to add mg_cfg to /usr/keys but i'm not sure what information needs to be contained in mg_cfg if any? Can anyone advise?
Look at the link both myself & Abu pointed you to yesterday.
http://www.world-of-satellite.com/showthread.php?24555-original-vu-duo&p=182712#post182712
All the info you need is there!
davy28
Forum Supporter
- Joined
- Jan 3, 2013
- Messages
- 223
- Reaction score
- 0
- Points
- 0
Hi,
Save the .rar file in WinRAR>drag and copy file from WinRAR to desktop>ftp file into usr/keys>make sure both mg_cfg and newcamd.list are there>edit newcamd.list with your own Subscription details then Menu>Set Up>SoftCam/CI>Softcam Manager>Enable Startup>Start mgcamd 1.35a/1.38 and if all's well....enjoy
It's obvious that the OP is struggling to understand all of this.
As I pointed out earlier this is where this forum has its limitations because of forum rules. My advice to the OP is to find a forum where this subject can be discussed in full.
As I pointed out earlier this is where this forum has its limitations because of forum rules. My advice to the OP is to find a forum where this subject can be discussed in full.
A
anparry
Guest
All up and runing now, couldn't have done this without all of your help and advice! Thanks again, very much appreciated!!!!
