[GiGaBlue QUAD] Manual & Auto Scan Menu Disappeared

[abu baniaz]

You are the only one with the problem. It will be fixed or changes undone.

Stop being pushy.

 

[rido111]

ok thank you.

 

[ronand]

Ok guys. I can reproduce this on my Solo2. Tuner A is a motorised dish (USALS), Tuner B is Second cable of motorised LNB, Tuner C is an RTL-SDR dongle on the USB port (DVB-T). If Tuner B is set as not configured then the menu items disappear. I dont think Tuner C has any effect on the issue. I would suggest that rido111 configure tuner B as equal to A (just to give it a configuration for testing).

 

[ronand]

The issue seems to have crept into version .028

 

[Huevos]

Obviously a driver issue.

Attach the dish cable to tuner B.
Setup tuner B.
Set tuner A to not configured.

 

[ronand]

Using Tuner B with A not configured works fine. It all works fine in .027 but that should be a workaround for the moment for the OP.

 

[Huevos]

Reason for this on the Solo2 is because it is internally connectable B to A, but not A to B. So Solo2 should always use tuner B as the main option when only one tuner is configured or the box is configured with one tuner as a slave.

 

[ronand]

That is true that there is an internal loopthrough but in .027 and earlier versions it didn't matter which tuner was configured - it worked.

 

[Huevos]

That is true that there is an internal loopthrough but in .027 and earlier versions it didn't matter which tuner was configured - it worked.

The driver/hardware bug was always there with the Solo2, it is just that this commit shows the bug.

This other commit was added as a workaround for the same bug on a Solo2 some time ago. https://github.com/OpenPLi/enigma2/...8c0f0df#diff-021996494dde61d73519d0ab55099cb4

 

[ronand]

OK. thanks for the info.

 

[abu baniaz]

Can affected persons do the following for debugging purposes:

Ensure debug logs are on, GUI restart is required to activate them. We will be restarting at end of next stage, so hold on for this.

In the followoing directory, /usr/lib/enigma2/python/Components
Rename NimManager.pyo to NimManager.pyo.original

Transfer the attached file to /usr/lib/enigma2/python/Components
Leave the ftp client open

Restart the receiver
Go into the tuner config menu

In the followoing directory, /usr/lib/enigma2/python/Components
Ensure you have NimManager.pyo and NimManager.pyo.original (you may need to refresh FTP client)
Delete NimManager.py

Please attach debug log to this thread

 

[rido111]

Hi

this solution will be released as an update?

 

[ccs]

Hi

this solution will be released as an update?

Debug log??

 

[Huevos]

Hi

this solution will be released as an update?

Didn't you say you were a software developer? You were supposed to run the file and post the debug log.

 

[Bonus101]

GigaBlue HD Quad Reduced tuner config menu

Hi, I have the same Tuner config menu after factory reset and flashing the latest image to my Gigablue HD Quad plus. My Mutant HD51 is still with the full Tuner config menu.

 

[Bonus101]

GigaBlue HD Quad Reduced tuner config menu debug logs

I tried the debugging and have attached the logs as requested.

regards,

 

[Huevos]

This has already been fixed. Update will be in build 031.