Octagon SF8008 new Images and dcc dream up programs

[clive01]

Hi, ive been using the older version of openvix for years, i tried to update today to the newer images on this site, from the older version 5.

the image upgrade went fine, but after, i couldnt use dcc or dreamup, is this normal, or did i do something wrong, or get a bad flash, if i clicked on check the ip address on dreamup it showed the connection, but sending my own channels lists, it wouldnt send it, no matter how many times i tried, i couldnt even enter files in dcc.


If the new version of open vix dont work, what is a good program to use for sending channel lists and ftp files now, gone back to the older images, and all worked again, using dcc and dream up.

thanks

 

[abu baniaz]

Did you add a password to the image? If not, that is the issue.

Those programs still work.

 

[clive01]

hello yes, i did.

seems like the same problem as here

https://www.world-of-satellite.com/showthread.php?64869-FTP-password-problems

 

[ccs]

Are you saying ftp won't start on the SF8008 ??

 

[clive01]

hi, i couldnt send a channel list, or send files using dcc, so yes i dont think ftp starts.

I clicked on test ip connection, that worked fine, but then trying to send the files, no luck.

I added a password on the menu of the octagon 8008, but im not sure i rebooted afterwards, would that have made a difference?

 

[ccs]

menu/setup/network/utilities/ftp will tell you if ftp is running.

 

[clive01]

i can check that and report back, but itll be later tonight thanks

yes i can confirm password changed etc and i get this


https://ibb.co/jvDBhY5

connection failed when i try to send files via dcc

 

[abu baniaz]

If reboot does not work, please also try setting the password by command line.

 

[clive01]

looks like it wont let me change passwords either, no matter what i try, youll see the errors

https://ibb.co/ZLc3GCj

 

[Ev0]

Did you use the recovery file to flash ?

If so, reflash with the image update only into the same slot and it should fix your issues.

 

[clive01]

hi Ev0

please, explain what you mean, i flashed the octagon using a usb stick, i tried the last 2 images, no luck.

I replaced all the files on the stick, with the files in the zip in the image

thanks

 

[twol]

hi Ev0

please, explain what you mean, i flashed the octagon using a usb stick, i tried the last 2 images, no luck.

I replaced all the files on the stick, with the files in the zip in the image

thanks

1. I think evo was talking of flashing online(much simpler than usb) —-> blue button, select ViX plugin, select ImageManager, yellow button(download) , then blue button(flash)
On reboot you will asked if you want to restore settings from a backup
2. dcc e2 - having had to find a working version of these packages for another user, I would say from this experience its possibly an issue with this tool
install putty——-> connect using root and if you have a password, enter it.
Then type passwd and enter. You will be asked twice for confirmation

 

[ccs]

i can check that and report back, but itll be later tonight thanks

yes i can confirm password changed etc and i get this


https://ibb.co/jvDBhY5

connection failed when i try to send files via dcc

The attachment shows that ftp has stopped on your box, so dcc/ftp will never connect.

FTP comes up and running as standard in ViX, I've no idea how it gets into the stopped state unless you stop it yourself.

I assume it doesn't start with the green button?

The thread you mentioned earlier was the same, but has stopped dead in its tracks with no reported solution from the OP.

 

[clive01]

hi yes the green button wont start it up, i tried pressing it lots of times, no luck.

I couldnt change the password either, maybe it is related to a bug somehow.

Back on the older images for me, at the moment, i cant send files to the stb for oscam, or send my channel lists.

I hope the bug is found, and fixed, thanks to all,who replied.

 

[Ev0]

hi Ev0

please, explain what you mean, i flashed the octagon using a usb stick, i tried the last 2 images, no luck.

I replaced all the files on the stick, with the files in the zip in the image

thanks

There are 2 files:

openvix-6.0.007.release-sf8008_recovery_emmc.zip and openvix-6.0.007.release-sf8008_mmc.zip



Did you use the openvix-6.0.007.release-sf8008_recovery_emmc.zip to flash the box (this is the one where you extract the zip file to the root of the usb), so it sounds like you did use this file ?

If so, you now need to use openvix-6.0.007.release-sf8008_mmc.zip to flash the same slot again (no need to extract the zip file), as there is a bug with the recovery files for these boxes.

 

[clive01]

There are 2 files:

openvix-6.0.007.release-sf8008_recovery_emmc.zip and openvix-6.0.007.release-sf8008_mmc.zip



Did you use the openvix-6.0.007.release-sf8008_recovery_emmc.zip to flash the box (this is the one where you extract the zip file to the root of the usb), so it sounds like you did use this file ? yes i used this version

If so, you now need to use openvix-6.0.007.release-sf8008_mmc.zip to flash the same slot again (no need to extract the zip file), as there is a bug with the recovery files for these boxes.ill test it later, when i have time, and report back thanks

 

[clive01]

thanks that fixed the problem, i can now connect via dcc etc

thanks

 

[Ev0]

thanks that fixed the problem, i can now connect via dcc etc

thanks

No probs