[VU+ Uno] settings

[neo.70]

Hi all, looking for a little bit of help, i have just loaded the latest vix image onto my uno and shortly followed by silverfoxes channel list(with vucc), all my 28.2 channels are greyed out and it comes up check tuner configuration where i have it set as simple a,b,c,d (going to add more satelites) and 28.2 as number one, can`t work out why all channels are shaded out and i can`t view any, any help would be appreciated, thanks.

 

[Rob van der Does]

I would choose the advanced mode. And sometimes a restart is required before the settings actually 'stick'.

 

[neo.70]

i have my motorised dish controlled by another box (so you know my setup) twin lnb, under advanced how would i load 4 diferent satellites? and i have restarted under simple many times, is there a new driver file that needs to be loaded before the latest image? i have already done it once about 1 month ago. i did a scan on 28.2 and came up with 21 channels, the dish is aligned and o.k with other reciever,thanks.

 

[Rob van der Does]

LNB 1 = satellite a, DiSEqC 1.0 AA
LNB 2 = satellite b, DiSEqC 1.0 AB etc.

 

[neo.70]

o.k where i went wrong, i reloaded image and before loading silverfox list i did a scan of 28.2 blindscan then loaded channel list so far all o.k, thanks for your help.