[ABM-DVB-T/T2] Timeout for Tuner Lock with DVB-T Dual Tuner USB Stick

[judge]

Make & model of USB tuner stick would also be handy, sorry if i've missed it in the thread?

 

[pembo]

I sense a problem here then

My DVB stick is only DVB-T and not DVB-T/T2 - it's a Kworld UB499-2T T09(IT9137
There are quite a few out there that don't do T2.

If I understand your point correctly Abu - it's because it's trying to use T2 and thats why it doesn't work (I'll try and test your changed line later to confirm)
The tuner config only shows DVB-T

 

[pembo]

Using the web remote takes screen shots automtaically. Unfortunately unlike satellite, for Terrestrial/Cable you have to be in area to test.

Before we commit changes, could you test following line please. I suspect it was just the sytem value that needed changing so that it is T tuner not T2. I'm pretty sure all other values are automatic.

<configuration key="waltham" frequency="698000000" inversion="0" modulation="3" system="0" bandwidth="8000000" code_rate_hp="5" code_rate_lp="5" transmission_mode="2" guard_interval="5" hierarchy="4">Waltham</configuration>

Thanks in advance.

Thanks Abu, I tried this, and sure enough, it works!

I guess this implies a bit of an issue though in that the system value needs to be auto detected based on the type of tuner?
e.g. mine show DVB-T only?


It the provider was committed in version control like that, would this then mean that any else on the Waltham transmitter would miss out on the DVB-T2 (i.e. HD channels) being available?

 

[abu baniaz]

Thank you for asssiting.

T2 tuners are backward compatible, so we will change to "0".