[GiGaBlue UHD QUAD 4K] Tune Failed

[CRMS]

Yesterday switched on debug logs.
Now getting Tune Failed.
No signal but Humax on legacy LNB connection has 100 percent.
Just rescanned - 0 services.
Just switched off the debug logs and now get.
Service unavailable. Check tuner configuration.
Nothing has been changed.

 

[ccs]

Only guessing, but if you rescan and get 0 services, the problem changes from no signal to service unavailable.

 

[cactikid]

Check to see if tuner has a signal like f connection bad and other box is working on another feed or same feed?
Are you scanning on the whole sat, or fixed frequency tp or Abm.

 

[twol]

Yesterday switched on debug logs.
Now getting Tune Failed.
No signal but Humax on legacy LNB connection has 100 percent.
Just rescanned - 0 services.
Just switched off the debug logs and now get.
Service unavailable. Check tuner configuration.
Nothing has been changed.

I run with debug all time, so nothing to do with debug.
Whats in tuner setup ? Just check tuners are still enabled and defined correctly

 

[CRMS]

Unicable into Tuner A. 88 percent. Remaining tuners exactly the same as before B looped to A etc etc.
Nothing changed at all except debug and new usb WiFi dongle yesterday. Both now removed.
Now get "Timed overlap in timers.xml detected. Please re check it. 3 timers disabled.
Rescanned, now just Channel 4 stations. But not Ch4 HD. Or FreeSports HD. And get a brief Tune Failed on each switch, but that maybe due to removing LNB power injector.
Baffling for ME as nothing touched since scanning/adding 4HD and FSHD.

 

[ccs]

Timers will get screwed up if services they need are unavailable.

 

[CRMS]

Well, deleted ABM and rescanned all inc manual CH4HD and FSHD and all now seems to work. Mystery why last night it threw a wobbly for no apparent reason?? I suppose software for you!!