No Display after bootloader update

[pege63]

Yes but still whe have a box that not starts after bootloader flash.
Yours thats not starts at all and my thats starts jumbs over the usb read and just say reading...
reading wath? well both boxex is f***d up anyway and Only silence from VIX team who made this image

Are we the ONLY one that this failed on?

There is a way to fix this if this was a dreambox with something called 2nd stage pack fix, cant this be done for this box to?

 

[Sicilian]

Only silence from VIX team who made this image

Don't blame the ViX Team. Could be many things that that might have gone wrong for you. Could be your download was corrupted, could be your USB stick, could be a number of things! Did you flash the bootloader before the image?? Loads of variables here, just to easy to blame the image rather then user error.

Next time start your own thread please rather than hijacking someone else's.

 

[pege63]

I use the same USB stick that allways, the files is not corrupted, sure i flash the bootloader first not first time i do this.

OKi so now you blame me, it's easy for you to blame everything on some on else instead of come with solutions.
Now i am the BAD guy, thanks m8!

 

[ukdirtyboy]

Don't blame the ViX Team. Could be many things that that might have gone wrong for you. Could be your download was corrupted, could be your USB stick, could be a number of things! Did you flash the bootloader before the image?? Loads of variables here, just to easy to blame the image rather then user error.

Nest time start your own thread please rather than hijacking someone else's.

mine has fail after the loaded be for the image was even loaded so its not the image and the boot loader is a offical vu+ download form here http://www2.vuplus.com/image-release/96-new-image-v-60-released
am not looking for anyone to blame just help in fixing the problem look at the video i posted and you will see my issuse

 

[Larry-G]

I use the same USB stick that allways, the files is not corrupted, sure i flash the bootloader first not first time i do this.

OKi so now you blame me, it's easy for you to blame everything on some on else instead of come with solutions.
Now i am the BAD guy, thanks m8!

no one is saying your the bad guy, but ranting and raving will not sort the problem. try another USB stick also try in one of the other USB ports. also maybe try another image such as BH for example. we are here to help but you getting ratty wont do any thing to help.

 

[Larry-G]

mine has fail after the loaded be for the image was even loaded so its not the image and the boot loader is a offical vu+ download form here http://www2.vuplus.com/image-release/96-new-image-v-60-released
am not looking for anyone to blame just help in fixing the problem look at the video i posted and you will see my issuse

no one is blaming you for any thing were trying to help, but we must do it methodically step by step.

 

[pege63]

I tried 5 USB sticks allready all this 5 sticks have worked for me before, it is just now after THIS NEW bootloader that this problem came up.
And i know we have to do this methodically step by step, but still you be frustraded when you do this the right way and you trust this files are OKi on this forum no.
Why i paste in this tread was that i also not have a display first but i flashed once more and it came back now i have display again

 

[Sicilian]

mine has fail after the loaded be for the image was even loaded so its not the image and the boot loader is a offical vu+ download form here http://www2.vuplus.com/image-release/96-new-image-v-60-released
am not looking for anyone to blame just help in fixing the problem look at the video i posted and you will see my issuse

Just quickly watched your video. Imo the box is bricked, one thing you could check it that all ribbon leads are connected properly and the psu lead is connected to securely to motherboard.

 

[ukdirtyboy]

Just quickly watched your video. Imo the box is bricked, one thing you could check it that all ribbon leads are connected properly and the psu lead is connected to securely to motherboard.

yep checked all that i can also feel the warmth from the cpu so it is running psu is outputting voltage etc, i simply flashed the usb bootloader the rebooted as i have before but this time it displyed nothing to say it was loading the firmware at next stage
i have jtag but see no info on jtagging for the duo as i have jtagged dboxs/dreamboxs etc in the pasts
thanks for the help anyway i have emailes vu support via email and hope to get a reply soon

 

[wullboy]

This will explan better
and i really need to oil that chair

im no expert m8, but should you not have the sat feeds attached to the box, as your video shows you have no feeds attached ??? i would also check the small ribbon that feeds the lcd on your box in case there is a problem there m8

sorry m8, my post came at the back of sic, so you have tried the ribbon !!!

 

[Larry-G]

I tried 5 USB sticks allready all this 5 sticks have worked for me before, it is just now after THIS NEW bootloader that this problem came up.
And i know we have to do this methodically step by step, but still you be frustraded when you do this the right way and you trust this files are OKi on this forum no.
Why i paste in this tread was that i also not have a display first but i flashed once more and it came back now i have display again

have you since tried to flash any other images ? such as the default factory image ?.

 

[ukdirtyboy]

im no expert m8, but should you not have the sat feeds attached to the box, as your video shows you have no feeds attached ??? i would also check the small ribbon that feeds the lcd on your box in case there is a problem there m8

sorry m8, my post came at the back of sic, so you have tried the ribbon !!!

no you dont need the sat feeds just power and the usb stick you dont need internet or video output just the usb
and just checked the ribbon its fine it didnt even have the lid off it it went wrong
used daily i could not belive it didnt flash done it many many times

 

[paul362]

yep checked all that i can also feel the warmth from the cpu so it is running psu is outputting voltage etc, i simply flashed the usb bootloader the rebooted as i have before but this time it displyed nothing to say it was loading the firmware at next stage
i have jtag but see no info on jtagging for the duo as i have jtagged dboxs/dreamboxs etc in the pasts
thanks for the help anyway i have emailes vu support via email and hope to get a reply soon

Hi just to get things right in my head , Did you flash the new bootloader then switch off the box from the rear mains switch and replace the USB containing the bootloader file with the new VIX image then re-plug the USB then power up the box from the rear mains switch?? OR did you flash bootloader file then power off the box from rear and re-boot without the usb containing the new VIX image on it ?????

 

[Maxwell]

Its possible that the box is stuck in deep standby, now this may seem stupid but have you tried to power the box on with the remote control ?
When I first got my box I also had nothing but the red led and cured it with a combination of switching on and off a few times with the rear switch and the remote, I haven't used deep standby since then.

 

[ukdirtyboy]

Hi just to get things right in my head , Did you flash the new bootloader then switch off the box from the rear mains switch and replace the USB containing the bootloader file with the new VIX image then re-plug the USB then power up the box from the rear mains switch?? OR did you flash bootloader file then power off the box from rear and re-boot without the usb containing the new VIX image on it ?????

loaded the bootloader to the usb then flashed it then switch box off the loaded files for new firmware then turn on box but it would not display load starting or anything
but just tried maxwell4321 thing about remote and alother it dont do anthing the led flashed green when you press any key

 

[pege63]

have you since tried to flash any other images ? such as the default factory image ?.

Yes i have tried sevral images, first it read USB stick for 1/100 second then jumped to just STARTING... on the display?

This shows wath hapends
http://www.youtube.com/watch?v=pA8nqw9Vn5I

 

[paul362]

Yes i have tried sevral images, first it read USB stick for 1/100 second then jumped to just READING... on display

This shows wath hapends
http://www.youtube.com/watch?v=pA8nqw9Vn5I

Weres your USB ? it looks like the front flap is closed on your video ? if you have the usb stick in the rear MOVE it to the front port behind the card reader flap and try again.

 

[pege63]

Weres your USB ? it looks like the front flap is closed on your video ? if you have the usb stick in the rear MOVE it to the front port behind the card reader flap and try again.

I have tried them all 3 USB ports same results

 

[paul362]

Ok but i always use the front USB port and have never had a problem !! sorry but i cannot help any further as you seem to be doing everything correctly as far as i can see, just make double sure you have a fully formatted (fat32) usb (another one preferably) other than that im as stumped as you are..:thumbsup:

 

[paul362]

loaded the bootloader to the usb then flashed it then switch box off the loaded files for new firmware then turn on box but it would not display load starting or anything
but just tried maxwell4321 thing about remote and alother it dont do anthing the led flashed green when you press any key

Then i don't know whats happenning to you there ? other than trying another power supply I don't know what else can be done for now ??