Remote Access

[lammy1961]

I'm able to access my VU+ Duo on my home network by logging in to the IP of the receiver.......
But how do I do the same task say from work ?
I have read this guide

http://www.vuplus-support.co.uk/showthread.php?656-Remote-Access-Remotely-access-your-reciever

The only thing that I have yet to do is....

Configuring the Webinterface on the reciever

First you need to go to your plugins menu. See below...

Click here to enlarge

Next you need to select the 'Webinterface' plugin and you should see the below or very similar.
Click here to enlarge
Here you need to set the below parameters.

a) 'HTTP Port' - It is strongly recommended that the port number 80 is changed to another random number. For this guide i have used port 1222

b) 'Enable HTTP Authentication' - For added security you should enable this so that upon connection to the web interface you will be asked to supply a username and password. (This guide assumes that you have a password set on your box already)

That brings us to the end of the config for the Webinterface.

Is this the part that allows me to log in from another location ? (not on my network)

Thanks in advance.

 

[grtmoby]

the mentioned part in addition to port forwarding as well.

 

[lammy1961]

Yes, I'm pretty sure that's configured, I can log onto my router remotely from work to restart it.
So....Do I just need to do this part ?

Configuring the Webinterface on the reciever

First you need to go to your plugins menu. See below...

Click here to enlarge

Next you need to select the 'Webinterface' plugin and you should see the below or very similar.
Click here to enlarge
Here you need to set the below parameters.

a) 'HTTP Port' - It is strongly recommended that the port number 80 is changed to another random number. For this guide i have used port 1222

b) 'Enable HTTP Authentication' - For added security you should enable this so that upon connection to the web interface you will be asked to supply a username and password. (This guide assumes that you have a password set on your box already)

That brings us to the end of the config for the Webinterface.

Thanks for the reply.

 

[grtmoby]

yes u do for security reasons but u can ignore it and just make sure the webinterface is enabled. from experience u'll need to change the port to anything other than 80 and thus u need to forward this port to the vu ip address...

 

[lammy1961]

What settings do I need to input into the Webinterface Plugin to allow me to remotely access my VU+ Duo from a remote computer..
And how do I access it when It's set up ?
Do I put this in the browser
myname.dyndns.org:1232 (1232 being the port number)

Thank you

 

[grtmoby]

1- u have to change the port number in the vu webinterface setting to 1232
2- from your router, u have to forward the port (1232) to the local ip of the vu
3- type myname.dyndns.org:1232 into your browser and u should have the access.

it is recommended if u gonna access the vu remotely to enable authentication.

 

[lammy1961]

Can I use the same Port Number on the VU that I am currently forwarding on the router for C/S ?
Or do I need to forward another port number ?

Sorry for all the questions.

Thank You.

 

[PAUL7331]

Can this be used to RESTART your ccam too? For example im at work and wish to restart my ccam from there?

 

[grtmoby]

Can I use the same Port Number on the VU that I am currently forwarding on the router for C/S ?
Or do I need to forward another port number ?

Nothing to be sorry for at all, everybody is welcome and needs to ask to learn

i would say you need to forward another port other than that used for C/S

Can this be used to RESTART your ccam too? For example im at work and wish to restart my ccam from there?

it can be used through the webinterface in two ways.

1- restart enigma2: webinterface> box control> power control
2- through webremote: webinterface> box control> remote control and according to ur image u can restart it as if u r home using the real remote control

 

[PAUL7331]

Nothing to be sorry for at all, everybody is welcome and needs to ask to learn

i would say you need to forward another port other than that used for C/S



it can be used through the webinterface in two ways.

1- restart enigma2: webinterface> box control> power control
2- through webremote: webinterface> box control> remote control and according to ur image u can restart it as if u r home using the real remote control

Thanks mate. Is this easier than using 'putty' then for example? It seems it! I've not tired putty yet by the way...

***By the way, I can view my bouquets, but cannot access anything else when I type in my dyndns username**** I take it this will change once I have followed the guide to forward port 1222 etc in my router?

 

[grtmoby]

i am sorry but i can't get this "Is this easier than using 'putty' then for example"

putty is a telnet client so what does it have to do with webinterface.

 

[PAUL7331]

i am sorry but i can't get this "Is this easier than using 'putty' then for example"

putty is a telnet client so what does it have to do with webinterface.

I have no idea neither mate! I've just heard that 'putty' can be used to restart ccam externally. SO I was wondering if the 'web interface' as instructed here is easier for a newbie like me!?

 

[grtmoby]

well it is possible but for me webinterface is much easier (the preparation need to use putty is a hassle for me)

 

[PAUL7331]

well it is possible but for me webinterface is much easier (the preparation need to use putty is a hassle for me)

With you saying that, then webinterface it is for me then mate! I wont bother with putty. Too many crazy numbers! LOL

 

[PAUL7331]

Cant get this to work.

Ok in my modem I have two options to forward port which I have to type numbers in to both... - PUBLIC PORT AND PRIVATE PORT.

Now on v+ duo I have

HTTP PORT

AND

HTTPS PORT

Both are ticket to YES. I have made a number other than '80' but I still cannot login when i type my dns address : number I have forwaded port to!

Any ideas what I could be doing wrong? I have the modem MSI RG54G3

On my receiver I also get the error message 'WEBNTERFACE COULDNT LISTEN TO PORT - (MY RECEIVER IP AND THEN : PORT NUMBER)

 

[xarqi]

I'll take a stab at this. I can only approach it from a general direction since I don't YET have my Vu+.

The Vu+ can still listen on the default port 80 - that's no big deal as it is on your side of the firewall. The modem must be set to forward a port number you decide on (say 1234 - whatever) specified in incoming connections to port 80 on the IP address of your Vu+ on your local network.

From the remote location, enter whatever the IP number or DN for your modem is, and port 1234. The modem will forward that to port 80 in the Vu+.

Authentication is always a good idea.

 

[PAUL7331]

I'll take a stab at this. I can only approach it from a general direction since I don't YET have my Vu+.

The Vu+ can still listen on the default port 80 - that's no big deal as it is on your side of the firewall. The modem must be set to forward a port number you decide on (say 1234 - whatever) specified in incoming connections to port 80 on the IP address of your Vu+ on your local network.

From the remote location, enter whatever the IP number or DN for your modem is, and port 1234. The modem will forward that to port 80 in the Vu+.

Authentication is always a good idea.

Thanks mate, so to confirm- what do I put in to the below boxes
HTTP PORT -- Is this '1234' for example ????

AND

HTTPS PORT-- ????




And in my modem settings do I use the below
PUBLIC PORT-- 1234 (for examlpe) AND PRIVATE PORT 80 ??

 

[bobonthejob]

Guys, i would use 'HTTP Port'. Set to your desired port number and also 'Enable HTTP Authentication' to yes.

The above will enure that you enter the username root and your vu duo password to get access to the Web interface.

Yes you can have port 1234 you would then need to set up the 'Virtual Service' or 'Port forward' (This can be labelled differently on router to router - Different manufacturers lebel it differently). Mines says 'Virtual Service'. You need to forward tcp port to port 1234. The ok the settings.

Once done...

Go to your browser....

http://Your.domain.com:portnumber

In the case of 1234...

http://Your.domain.com:1234

Hope this helps.

PS..... i see what you mean by accessing through putty. Basically you would then be creating a ssh session to your box. I havent figured out a way of doing this remotely but would love to know myself if it is possible.

 

[PAUL7331]

Guys, i would use 'HTTP Port'. Set to your desired port number and also 'Enable HTTP Authentication' to yes.

The above will enure that you enter the username root and your vu duo password to get access to the Web interface.

Yes you can have port 1234 you would then need to set up the 'Virtual Service' or 'Port forward' (This can be labelled differently on router to router - Different manufacturers lebel it differently). Mines says 'Virtual Service'. You need to forward tcp port to port 1234. The ok the settings.

Once done...

Go to your browser....

http://Your.domain.com:portnumber

In the case of 1234...

http://Your.domain.com:1234

Hope this helps.

PS..... i see what you mean by accessing through putty. Basically you would then be creating a ssh session to your box. I havent figured out a way of doing this remotely but would love to know myself if it is possible.

Thanks mate, so do I select 'NO' to the HTTP 'S' OPTION? BUT YES TO THE 'HTTP' OPTION?

And on my router I also have 'virtual server' but what do I put in PUBLIC PORT and what do I put in PRIVATE PORT?

I fear I may be getting nubers the wrong way around!

 

[grtmoby]

yes select NO to HTTP "S" option

for both the private and pubic port but the same number for example 1234