Filesystem Error: fsck

[ptoni]

Yes, we knew that already because of your previous errors. But go in there, and check what the location is exactly.
'Something' has been mounted as hdd/movie, that isn't actually your HDD. Also tell us what mountmanager says about the HDD.

Under Recording settings menu, The Defualt Move location is showing as Hdd/movie. When I select this it shows Parent Directory Folder an Trash folder only (but I cannot select either of these folders. There is also bookmark HDD/movie. How do I confirm that the HDD/move location is the hard drive?

The Mount Manager shows: Hard Disck ATA WDC10 ERX, Size: 976.61gb; Mount: /media/hdd: Device/devsda1; Type: Ext 4 r/w.
It also shows my USB (which I use for back up), Mount: /media/usb: Device/devsdb1; Type: Vfat r/w.

What should I do next?

 

[Rob van der Does]

Please: in recordingssettings click on the entry showing the path. That opens an other screen. In there push 'CH+' and navigate to the correct location (probably media/hdd/movie) and click on blue. Now a new bookmark has been established.
Click on 'CH-' and now click on the just made bookmark, then save. You now return to the previous screen: exit via 'save'.

 

[judge]

If you FTP/telnet into the box, are the correct locations there & mounted?

 

[ptoni]

Please: in recordingssettings click on the entry showing the path. That opens an other screen. In there push 'CH+' and navigate to the correct location (probably media/hdd/movie) and click on blue. Now a new bookmark has been established.
Click on 'CH-' and now click on the just made bookmark, then save. You now return to the previous screen: exit via 'save'.

Thanks. Followed these instructions but still no joy.

HDD/movie bookmark already existed (at the top of screen Default Movie location is shown: hdd/movie) this only gives option to remove bookmark.

I also created new bookmark media/hdd (at the top of screen Default Movie location for this bookmark is shown: media/hdd) but this did not work either.

When I try to record after 20 secons a message appears disk full. Then when you try to delete the 20 second recording in the trash can the box crashes. Anything else I can do? Thanks

 

[ptoni]

If you FTP/telnet into the box, are the correct locations there & mounted?

Using FTP, I can see the Media and HDD folders. In Media you have HDD folder which contains logs, lost & found, timershift and movie.

When you click HDD folder (whch is located on the first page where all other folders are) it opens folders under Media.


What telnet command do I use to check if hard drive is mounted?

 

[Rob van der Does]

What is the output of the telnet commands

blkid

and

df -h

 

[ptoni]

What is the output of the telnet commands

blkid

and

df -h

The output of telnet commands, is as follows:

root@vuduo:~# blkid
/dev/ubi0_0: UUID="9891dc83-9c79-431a-948a-d51090e64a6f" TYPE="ubifs"
/dev/sda1: LABEL="PETERPAL" UUID="8056-A382" TYPE="vfat"
/dev/sdb1: UUID="55246bf5-b706-4703-8a60-1e851f3e142b" TYPE="ext4"
root@vuduo:~#

root@vuduo:~# df -h
Filesystem Size Used Available Use% Mounted on
ubi0:rootfs 102.1M 61.8M 40.3M 61% /
devtmpfs 67.5M 4.0K 67.4M 0% /dev
tmpfs 64.0K 0 64.0K 0% /media
/dev/sda1 7.5G 171.8M 7.3G 2% /media/usb
/dev/sdb1 931.4G 207.1M 931.2G 0% /media/hdd
tmpfs 67.6M 1.0M 66.5M 2% /var/volatile
root@vuduo:~#


I have a usb inserted and 1tb hard drive. What do these commands mean and what can i do next?

 

[Rob van der Does]

Those commands show some details about your mounts.

Please do the following:
1- Disconnect your USB-device;
2- Go to mountmanager and change the mount of the HDD (presently mounted as 'sdb1') to 'sda1'
3- Follow the orders by the box (reboot);
4- After the reboot, go to the mountmanager to check the HDD to be indeed mounted as 'sda1';
if that's fine
5- go to the recordings settings, and make sure that the correct path has been set. Make a recording to check all is well.
if that's fine
6- insert the USB-device again, and use mountmanager to set it as 'usb'. Reboot if asked by the box.
After the reboot: check again if all is fine.
And please post again the output of

blkid

and

df -h

See you later!

 

[ptoni]

Those commands show some details about your mounts.

Please do the following:
1- Disconnect your USB-device;
2- Go to mountmanager and change the mount of the HDD (presently mounted as 'sdb1') to 'sda1'
3- Follow the orders by the box (reboot);
4- After the reboot, go to the mountmanager to check the HDD to be indeed mounted as 'sda1';
if that's fine
5- go to the recordings settings, and make sure that the correct path has been set. Make a recording to check all is well.
if that's fine
6- insert the USB-device again, and use mountmanager to set it as 'usb'. Reboot if asked by the box.
After the reboot: check again if all is fine.
And please post again the output of

blkid

and

df -h

See you later!

Again Did not work. Message this time is no HDD found or HDD not initailised. Followed instructions as above. Mount Manager and recording settings seem to be correct. They show:

Mount Manager shows: Device: /dev/sda1, Mount:media/sda1, Type Ext 4 r/W

Recording settings shows location: hdd/movie then when you click it shows path to media/sda1 whcich is also set up as bookmark.

The output of telnet is:


/dev/ubi0_0: UUID="9891dc83-9c79-431a-948a-d51090e64a6f" TYPE="ubifs"
/dev/sda1: UUID="55246bf5-b706-4703-8a60-1e851f3e142b" TYPE="ext4"
root@vuduo:~#
root@vuduo:~#

root@vuduo:~# df -h
Filesystem Size Used Available Use% Mounted on
ubi0:rootfs 102.1M 63.3M 38.8M 62% /
devtmpfs 67.5M 4.0K 67.4M 0% /dev
tmpfs 64.0K 0 64.0K 0% /media
/dev/sda1 931.4G 209.4M 931.2G 0% /media/sda1
tmpfs 67.6M 1.0M 66.6M 1% /var/volatile
root@vuduo:~#


What next????????

 

[Rob van der Does]

Sorry: I'm out of ideas. Let's hope one of my colleagues jumps in.

 

[judge]

/dev/sda1 931.4G 209.4M 931.2G 0% /media/sda1

Is showing your HDD as mounted, can you go to Menu -> Setup -> VIX -> Mount Manager, press green button & change the mount point to /media/hdd, save & reboot.

 

[ptoni]

/dev/sda1 931.4G 209.4M 931.2G 0% /media/sda1

Is showing your HDD as mounted, can you go to Menu -> Setup -> VIX -> Mount Manager, press green button & change the mount point to /media/hdd, save & reboot.

Tried this but still not recording. When you put recording On, Message appears after 20 seconds saying: ""Write Error, Disk Full"".

Do you think there are compatibilty issue with Western Digital hard drive, WDC10ERX?

What else can I try?