[ET5x00] EPG will not not update/download.

[bushiee]

As the title says Epg will not download after new flash setup on my et5000.

After doing a complete flash (with latest boot loader) of either Zues and now the new Helios firmware my box works perfect until it comes to updating the epg.
After doing the initial flash and setting everything up I set up the epg to download Astra 28.2 East channel guide and it downloads fine. The problem is when I try to either manually down load or set and auto download of the epg. It tries to initialize the down load but just freezes at "downloading" and nothing happens.

This also happened on the Zeus firmware.

I have tried numerous different memory sticks, If I format initialize the memory memory stick mount, again it will download the epg but again after the initial download on a fresh memory stick it freezes at "downloading". I have also tried using the Hard Drive and the internal flash but every time the same thing it will not download/update after the initial download.
I had it set to auto update at 4:00am and when I get up for work at 6:00am its still stuck on "downloading" so have left it for a few hours but it just freezes on "downloading"

I am now back on the 2.4 213 firmware which seems to be the only one that works with my box

I do like the look of the new firmware so any help sorting this little problem would be most appreciated.

 

[bushiee]

Nobody ?????

 

[judge]

What EPG sources are you using?

 

[Rob van der Does]

For the 5k you may consider using a swap file.

 

[rob588cliff]

Rob,

Having similar issues, what exactly is a swap file and how do I set it up ??

Thanks.

 

[Rob van der Does]

A swap file allows some more memory.
Make sure to have an USB stick in the Ext 3/4 format (let the box initialize it), go to ViX --> Swapmanager, create a file and activate it.
In About --> memory you can see the actual status.
Once done, try the EPG download again.

 

[rob588cliff]

Thanks Rob,

I have been using Cross EPG but have found it to be very inconsistent. One day its fine the next day half the data is missing and sometimes its all missing, do you think the swap file would help?? I've recently changed to XMLTV importer and everything appears to be fine.......is that usual ?

Thanks.

 

[Rob van der Does]

I can't really say so: it are two completely different systems. Cross is good for Open-TV, the dedicated importer is good for XMLTV import.

 

[rob588cliff]

Rob,

Can you just explain this bit ion a bit more detail ???

'Make sure to have an USB stick in the Ext 3/4 format (let the box initialize it)'

The rest makes sense......thanks.

 

[Rob van der Does]

Put an USB stick in.
Go to ViX-mount manager and make sure it's mounted.
Go to Storage devices --> initialise and let the box initialise the stick (make sure to select the correct device, not your HDD, or you'll loose all your recordings (and blame me for it )). Then it's in the required format.

 

[rob588cliff]

Lol ok !!

I've already got a USB stick in use that holds my picons etc. I assume from your reply that if I initialise that stick I will wipe everything off ? Am I best to initialise another USB stick with nothing on it and use this for swap file only ?

Thanks

 

[Rob van der Does]

Well, for proper use of Picons you also need an Ext3/4 device.

 

[bushiee]

What EPG sources are you using?

Im using crossepg, which is installed with the flash, And within cross epg Im using openTV, Sky uk opentv (astra on 28.2)

I might give the swap file a try to see if that makes any difference. But never had a problem with previous versions, Seems something in crossepg has change from 2.4 to the new helios, Does anybody know if the crossepg in the newer flashes use more memory than before?
Thanks

 

[Rob van der Does]

Cross has undergone several updates. It's hard to say if memory usage has been changed, but it is a memory intensive process anyway.

 

[bushiee]

Would the epg still download the first time if there wasn't enough memory available? Like I said in my original post, After doing the initial flash (Helios) and setting everything up I set up the epg to download Astra 28.2 East channel guide and it downloads fine. The problem is when I try to either manually down load or set and auto download of the epg. It tries to initialize the down load but just freezes at "downloading" and nothing happens, would this be a lack memory?

 

[Rob van der Does]

Very well possible. Just after rebooting the box the amount of free RAM will be higher. So this is an extra indication a swap-file is required (which is not surprising on a low-mem box).

 

[bushiee]

For the 5k you may consider using a swap file.

Finally got round to updating and creating a swap file (96mb) and so far so good :thumbsup:
Many thanks Rob. Ill let you know if I come up against anymore problems.
Cheers

 

[Rimmel]

Bushieeeeeeeee hey dude

 

[bushiee]

Bushieeeeeeeee hey dude

2 Days and still going strong

 

[rob588cliff]

Rob,

Sorry, what exactly is a external 3/4 device ??