[VU+ Duo2] Fix: [TimerList] move Orb position after Service Name.

[2stein]

I already tried this fix and found it better than before.
But now the beginning of the channel name is cut off. :-(
I'd rather prefer the end to be cut off.
Skin: standard (VIX HD Night)
Thanks.

 

[abu baniaz]

If you are able to, disable overscan on your TV.

If not, you will have to edit the OSD position setup
Menu > Setup > System > User Interface > Position setup

Reduce the width and move right/left. Reduce height and move down/up. You should just about see the ends of the box.

 

[2stein]

oh, thanks for the info. will try to adjust the osd accordingly.

 

[2stein]

now: i adjusted the osd but the beginning of the channel name in the timer list is still cut off.

 

[Maxwell]

did you turn off overscan on the TV ? 99.9% of these problems are caused by it

 

[2stein]

on my sony tv i can't turn off overscan.

 

[rossi2000]

on my sony tv its called 1x1 pixel or something

in the settings where 16:9 is etc, its in there

 

[2stein]

i know, but in this mode the tv picture doesn't completely fill the screen and an ugly border is left.

 

[abu baniaz]

Upload a picture showing what you mean.

You are probably talking about pillarbox.

 

[2stein]

Oh boy, finally I was able to turn off overscan. The TV setting is called "Full Pixels" or something like that.
But: the beginning of the channel name in the timer list is still cut off.

Channel name is:"Das Erste HD"

 

[judge]

Oh boy, finally I was able to turn off overscan. The TV setting is called "Full Pixels" or something like that.
But: the beginning of the channel name in the timer list is still cut off.
View attachment 34847
Channel name is:"Das Erste HD"

This is fixed in current test builds, so once Apollo is released, you'll have the fix.

 

[2stein]

Ok, thanks!