Solo2 won't find network drive through browse network neighborhood

[guitarman]

Hi Guys, I am trying to map to my network drive on my Solo2 using the "browse network neighborhood" in Mount Setup. I am using the latest version of VIX. Everytime i start the browse all it does is lock up the screen. Only a reboot will clear it. I can manually set up the network drive but everytime I reboot, it loses the mapping unless I hit "mount again".
Any ideas chaps? First time I have experienced this issue with VIX. I have Samba installed.
thanks for any help.

 

[Sirius]

Have you tried NFC rather than samba???

Sent from my D5503 using Tapatalk

 

[guitarman]

NFS is installed also. Very strange.

 

[chaser]

Try uninstalling then reinstalling NFS. I've had to do this in the past.

 

[Sirius]

NFC.... I mean NFS... Can tell I had little too many beers last night Looool..

As above try removing samba and Installing nfs, also try setting up mounts manually

Sent from my D5503 using Tapatalk

 

[s1m0nw]

Where is the other HDD? Is it in a has system or another satellite box??

Sent from my GT-I9300 using Tapatalk

 

[guitarman]

It's connected to the router as a NAS. Always worked with VIX I.e mapped ok from boot. Only works now if auto mount when box is up.

 

[s1m0nw]

Uninstall NFS and samba restart box install NFS then look for HDD set mount as fstab

Sent from my GT-I9300 using Tapatalk

 

[Rob van der Does]

'autofs' is actually advised, as it handles off-line mounts (which fstab doesn't very well).
Also rebooting the router might help.

 

[guitarman]

Tried everything guys. No luck. Will not mount from boot no matter what I do. Reflashed box also in case it was a corrupt flash. Can only mount if I do it manually, but my Mrs don't understand this. Never had this issue in prior builds of Vix. Did a check with a pli image that worked no
problem from boot. Real bugga this is.

 

[judge]

Enable debug logs, reboot the box & upload one of them here.
Might have some info as to why it's not mounting.

 

[guitarman]

Sorry for the late reply... i went on pli for a couple of weeks because of this issue (this works fine), but I am not giving up with vix just yet!

Ok.. so the problem still exist. I have autofs enabled, and i manually have to press "mount again" in networks for it to pick up my NAS. I did create a log file, the only two entries in the log file that reference "mount" are

@line 69 > new Network Mount SERVER -> /media/net/SERVER
@line 163 > command ['umount -fl /media/net/SERVER', 'sleep 2', 'mount //192.168.0.1/Data']

I have this mount issue with both Zeus and Helios. Please note, everything seemed to worked perfect with the older OpenVix 775 which I had working for a good while with my setup.

I should mention that I use a Edimax EW-7811UN 150Mbps Wireless Nano USB Adapter with my box, I am not wired via ethernet.

 

[knight4728]

I have the same problem with my vu+ duo2 it just freezes and I have to do a hard reboot.
I also have a solo2 and it works fine on that, the solo is Ethernet and the duo is using the internal wi-fi so I am wondering if this is the issue?

 

[DaMacFunkin]

I have the same problem with my vu+ duo2 it just freezes and I have to do a hard reboot.

My duo2 regularly froze all my internet even though it was hard wired and would need rebooting, during one such incident it wouldn't reboot that was nearly 5 weeks ago it has been back at Vu now for 2 weeks for repair, so be careful m8.

 

[Rob van der Does]

I can't say I recognize these issues on Solo2 or DUO2 (or any other box) using Ethernet.
WiFi can indeed cause drop outs.

 

[knight4728]

I don't think it's a wi-fi drop out, I never lose a signal with my duo2 it's a great system, it just doesn't like the browse network for some reason. The box freezes and only a hard reboot makes it respond again. My solo2 works great and finds the network perfectly and quickly, this is via Ethernet, it's the only thing I can think of. I have rebooted router, reinstalled NFS but all to no avail.

 

[guitarman]

Hello Rob, thanks for your reply. Would you be able to test a similar setup at your place with an external NAS? The problem does seem to occur in WiFi mode on the Vu boxes with both latest builds of Vix. To summarize:
1. A Network neighbourhood search freezes the box in WiFi mode
2. Continually need to re-mount to map the network NAS on every box reboot.

Please note, have tested with two other image providers without these problems manifesting themselves. This I think is a bug in Helios?

 

[Rob van der Does]

My Solo2 on Apollo 001 with the VU-WiFi dongle works fine. Network browser shows all my devices and mounting a NAS works fine (also after a reboot).

 

[knight4728]

Rob my solo2 also works fine but not the duo2 which is a better box. No matter what I try it freezes everytime. It's strange that there are 2 of us having this problem is anyone else?

 

[judge]

debug logs?