[VU+ Duo] Apollo 003 Time Settings

[Maxwell]

in australia, might try another restart.

But where in Oz - it matters !

 

[omega99]

sorry in perth, set time to another +8.00 zone & now it right??, switch back to Perth = bqack to wrong!! crazy

 

[Maxwell]

ok found the problem should be fixed in this one

 

[omega99]

ok found the problem should be fixed in this one

all sorted now , thanks heaps

 

[Savolax]

I have gigablue 800 ue plus and timezone does't work. Can I use those timezone rar and where I put it.

 

[Maxwell]

I have gigablue 800 ue plus and timezone does't work. Can I use those timezone rar and where I put it.

Yes Instructions are in post #15

 

[Savolax]

I put that timezone xml to etc/tuxbox but time is behind three hours. Area is helsinki finland GMT+2??

 

[Maxwell]

I put that timezone xml to etc/tuxbox but time is behind three hours. Area is helsinki finland GMT+2??

Cant explain that but try this one

 

[Savolax]

Thanks very much. Works fine.

 

[Mavarick]

Thanks to Maxwell,
i have fixed the issue all times are back to normal, just replaced fine and rebooted , didn't need to reset time postion at all.

 

[2jok]

My Duo2 will not update from 001 to 002 it says 374 packages to update it goes through the update process then remains in standby when i power up it is still at 001 with an update available can any one help me please

 

[momayaz]

i will never ever make online software update again ..

stuck on boot (starting) and had to spend hours reflashing and getting back my setting ...

vu+uno
openvix
Apollo003

 

[Larry-G]

i will never ever make online software update again ..

stuck on boot (starting) and had to spend hours reflashing and getting back my setting ...

vu+uno
openvix
Apollo003

as part of the online update feature a full settings backup is automatically created which can be used in the event of a problem.

Meaning you can restore to a full working image in minutes, if it seriously takes you hours to flash and setup your image you are doing something very wrong in which case I recommend you sell the receiver and opt for a closed source one instead.

Personally I have used the online update feature several hundreds of times and even when it does go wrong things can always be recovered in minutes.

Sent from my GT-I9300 using Tapatalk

 

[omega99]

spot on, eay as even after forgetting for few months

as part of the online update feature a full settings backup is automatically created which can be used in the event of a problem.

Meaning you can restore to a full working image in minutes, if it seriously takes you hours to flash and setup your image you are doing something very wrong in which case I recommend you sell the receiver and opt for a closed source one instead.

Personally I have used the online update feature several hundreds of times and even when it does go wrong things can always be recovered in minutes.

Sent from my GT-I9300 using Tapatalk

 

[2jok]

Vu+dou2 is not updated ??

Hi! My Duo2 will not update from 001 to 003 it says 374 packages to update it goes through the update process then remains in standby when i power up it is still at 001 with an update available . Please please help!!!

 

[abu baniaz]

You are posting in a thread that has nothing to do with your issue.

Please see this thread instead http://www.world-of-satellite.com/showthread.php?t=38560

 

[2jok]

Thank you Abu baniaz and sorry I am new on . Worl of satellite

 

[momayaz]

please Vixers .. fix ( Kuwait Ryiadh ) +3 GMT . not active on time setting ..
when I choose it .. time wont automatically change

openvix 003 Apollo
vu+uno

 

[zl1dt]

Just re-flashed to Apollo 007, time problem still remains. Still 12 hours behind New Zealand time

 

[judge]

Just re-flashed to Apollo 007, time problem still remains. Still 12 hours behind New Zealand time

Settings restored or a fresh flash set-up from scratch?