motor and fixed dish

[rossi2000]

Morning all.

Id like to be able to access my motor dish from stb2. Recording is not needed.
Goimg of some of abus pictures is the following diagram the correct way to achieve this?



So from that id need 2 x 2in 1out diseq switches? Just need to be sure before i purchase things.

So stb1 can only control tjr motor ans then stb2 can receive anythimg on the sat which tje motor is set to

 

[BoxFreak]

Yep that's how I have set up my two dish with motor (Only using quad LNB's and 4-1 switches). Works well, only problem I faced when setting up was that one of the LNB's did not work well in this set up. It could tune to channel but signal was lost after a while (changing to an different brand LNB fixed the problem).

 

[rossi2000]

yo cheers

there are many brands of diseq switch, will any brand be ok like a cheapy one?

 

[abu baniaz]

Just make sure you do not set up STB 2 as motorsied as some swithces wont take the extra voltage.

There is a configuration that you can use so that you do not have to change the config on STB2 whenever STB1 moved the dish. Cant find the thread.

 

[BoxFreak]

yo cheers

there are many brands of diseq switch, will any brand be ok like a cheapy one?

I used EMP-Centauri switches and Inverto Black LNB's. As said with an "cheap" LNB I ran into problems... There is not so much price difference bethween good quality switch and the cheap copy I would not try to save there. As the configuration is more complex the chances of getting into problems with the cheap parts increases

 

[parma]

hi may i ask you only wish stb1 to control the motor not both

 

[abu baniaz]

It is only possible to control with receiver which has the co-axial cable connected to the motor.

Exceptions/Variations
RemoteStreamConverter
High Isolation switch.

 

[parma]

only asked as i never used diseq switches so do not know the set up always had the usals configuration. however i have got motorised dish and 1 fixed dish which i run vu duo and vu duo2 and both boxes A tuners is connected to the fixed dish and b tuners to motor however what tuner is connected to what dish is up to you. using a smart priority switch, i can control the motorised dish on the master/slave principle with both stb so
If the master receiver (defined by smart priority switch) selects the motor {LNB B}, the switch prevents the slave receiver from connecting to motor/moving the dish.
If the master receiver selects the static dish {LNB A}, the switch allows the slave receiver to connect to the motor/move the dish. This works with both USALS and Diseqc 1.2 i should imagine.

 

[parma]

or as abu baniaz post use remotestreamconverter save you all the trouble and cost

 

[abu baniaz]

Diseqc switch and diseqc motor controls are two differnt things.

Can you post a diagram of your setup please? Also does your setup mean only only receiver can access the motorsied dish as opposed to only one being able to control it.

 

[parma]

set up

set up

 

[parma]

both can access as long as same transponder

 

[rossi2000]

hi may i ask you only wish stb1 to control the motor not both

ideally i would like to be able to control the motor with both boxes.
but i thought it wasnt possible to do that.

 

[parma]

i had this set up for a few years before i heard of remotestreamconverter

 

[parma]

i was told that but you can do the same thing without the cables with the plugin

 

[rossi2000]

remotestreamconverter only works if you keep the server box online all the time,

as i dont, i cant use that solution.


will have a look at those smart switches

 

[abu baniaz]

If the smartswitch does not work out for you and if you don't mind a manual switch, consider a high isolation switch. Only one receiver will have access to the motor. Means running cable from switch to other receiver.

 

[parma]

Digiality-Smart-Priority-Switch. not sure if against rule to post site but cost me about £25 including postage from a company in germany

 

[Rob van der Does]

remotestreamconverter only works if you keep the server box online all the time,

Or use a WOL-capable box as server.

 

[cactikid]

getting a bit lost here,if he changed lnb on motor to double or quad it would allow 2 boxes independent views but on same sat any use?