AB-Com PULSe 4K SE. Crazy offer only £99! FREE UK DELIVERY!
Superb quality and spec AB-Com PULSe 4K SE. Crazy offer! Only £99! FREE UK DELIVERY! 4K UHD, Enigma 2, Multiboot 4 images & more!...
AB-Com PULSe 4k Rev II Twin tuner only £149! FREE UK DELIVERY!
Superb quality and spec AB-Com PULSe 4K Rev II Twin Satellite tuner only £149! FREE UK DELIVERY! 4K UHD, Enigma 2, SATA HDD facility, Multiboot 4 images & more!...

[ET10x00] [4.2.027] Xtrend. Problems with USB tuners

Just tried 4.2.030 with the latest Sundtek driver (19/2/2017), still crashes.....

Code: 
root@et10000:~# dmesg
[    1.082000] bcm40nm_pm_genet1_disable 00
[    1.082000] __clk_disable: network [0]
[    1.082000] bcm7425_pm_network_disable 00
[    1.082000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.088000] __clk_enable: usb [1]
[    1.088000] bcm40nm_pm_usb_enable 00
[    1.088000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI
[    1.093000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
[    1.111000] ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
[    1.124000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
[    1.130000] hub 1-0:1.0: USB hub found
[    1.134000] hub 1-0:1.0: 1 port detected
[    1.138000] ehci-brcm ehci-brcm.1: Broadcom STB EHCI
[    1.143000] ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
[    1.161000] ehci-brcm ehci-brcm.1: irq 67, io mem 0x10480500
[    1.173000] ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
[    1.179000] hub 2-0:1.0: USB hub found
[    1.183000] hub 2-0:1.0: 1 port detected
[    1.187000] ehci-brcm ehci-brcm.2: Broadcom STB EHCI
[    1.192000] ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
[    1.210000] ehci-brcm ehci-brcm.2: irq 71, io mem 0x10490300
[    1.221000] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.222000] ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
[    1.233000] hub 3-0:1.0: USB hub found
[    1.237000] hub 3-0:1.0: 1 port detected
[    1.241000] ata1.00: ATA-8: HGST HTS541010A9E680, JA0OA560, max UDMA/133
[    1.241000] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.255000] ata1.00: configured for UDMA/133
[    1.255000] ehci-brcm ehci-brcm.3: Broadcom STB EHCI
[    1.255000] ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
[    1.268000] ehci-brcm ehci-brcm.3: irq 72, io mem 0x10490500
[    1.275000] ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
[    1.283000] hub 4-0:1.0: USB hub found
[    1.283000] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS541010A9 A560 PQ: 0 ANSI: 5
[    1.295000] hub 4-0:1.0: 1 port detected
[    1.300000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.306000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI
[    1.311000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
[    1.319000] ohci-brcm ohci-brcm.0: irq 68, io mem 0x10480400
[    1.336000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.342000] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.350000] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.355000] sd 0:0:0:0: [sda] Write Protect is off
[    1.360000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.360000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.390000] hub 5-0:1.0: USB hub found
[    1.394000] hub 5-0:1.0: 1 port detected
[    1.398000] ohci-brcm ohci-brcm.1: Broadcom STB OHCI
[    1.403000] ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
[    1.411000] ohci-brcm ohci-brcm.1: irq 69, io mem 0x10480600
[    1.483000] hub 6-0:1.0: USB hub found
[    1.487000] hub 6-0:1.0: 1 port detected
[    1.491000] ohci-brcm ohci-brcm.2: Broadcom STB OHCI
[    1.496000] ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
[    1.504000] ohci-brcm ohci-brcm.2: irq 73, io mem 0x10490400
[    1.520000] usb 1-1: new high-speed USB device number 2 using ehci-brcm
[    1.576000] hub 7-0:1.0: USB hub found
[    1.580000] usb 3-1: new high-speed USB device number 2 using ehci-brcm
[    1.587000] hub 7-0:1.0: 1 port detected
[    1.591000] ohci-brcm ohci-brcm.3: Broadcom STB OHCI
[    1.596000] ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
[    1.604000] ohci-brcm ohci-brcm.3: irq 74, io mem 0x10490600
[    1.669000] ata2: SATA link down (SStatus 0 SControl 300)
[    1.676000] hub 8-0:1.0: USB hub found
[    1.680000] hub 8-0:1.0: 1 port detected
[    1.684000] usbcore: registered new interface driver cdc_wdm
[    1.690000] usbcore: registered new interface driver usb-storage
[    1.697000] mousedev: PS/2 mouse device common for all mice
[    1.697000]  sda: sda1
[    1.702000] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.709000] i2c /dev entries driver
[    1.713000] usbcore: registered new interface driver btusb
[    1.719000] sdhci: Secure Digital Host Controller Interface driver
[    1.725000] sdhci: Copyright(c) Pierre Ossman
[    1.729000] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.735000] sdhci-brcmstb sdhci-brcmstb.0: Disabled by bootloader
[    1.741000] sdhci-brcmstb sdhci-brcmstb.1: Disabled by bootloader
[    1.747000] hidraw: raw HID events driver (C) Jiri Kosina
[    1.753000] usbcore: registered new interface driver usbhid
[    1.759000] usbhid: USB HID core driver
[    1.763000] NET: Registered protocol family 17
[    1.768000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    1.774000] Bluetooth: HIDP socket layer initialized
[    1.779000] Key type dns_resolver registered
[    1.783000] PM: CP0 COUNT/COMPARE frequency does not depend on divisor
[    1.791000] hub 3-1:1.0: USB hub found
[    1.795000] hub 3-1:1.0: 4 ports detected
[    1.800000] EBI CS1: setting up NAND flash (primary)
[    1.805000] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xd3
[    1.812000] nand: Samsung NAND 1GiB 3,3V 8-bit
[    1.816000] nand: 1024 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.824000] brcmnand brcmnand.0: 1024MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-16 (1KiB sector)
[    1.835000] Bad block table found at page 524224, version 0x01
[    1.841000] Bad block table found at page 524160, version 0x01
[    1.848000] Creating 3 MTD partitions on "brcmnand.0":
[    1.853000] 0x000000000000-0x000040000000 : "complete"
[    1.864000] 0x000000000000-0x000000600000 : "kernel"
[    1.870000] 0x000000600000-0x000040000000 : "rootfs"
[    1.881000] EBI CS0: setting up SPI flash
[    1.885000] brcm_setup_spi_flash: can't locate SPI master
[    1.891000] brcm_setup_cs: can't register SPI flash (error -19)
[    1.897000] ubi0: default fastmap pool size: 256
[    1.902000] ubi0: default fastmap WL pool size: 128
[    1.906000] ubi0: attaching mtd2
[    2.117000] usb 3-1.1: new full-speed USB device number 3 using ehci-brcm
[    2.293000] usb 3-1.4: new high-speed USB device number 4 using ehci-brcm
[    2.371000] random: crng init done
[    6.844000] ubi0: scanning is finished
[    6.864000] ubi0 error: ubi_update_fastmap: could not find any anchor PEB
[    6.871000] ubi0 warning: ubi_update_fastmap: Unable to write new fastmap, err=-28
[    6.895000] ubi0 error: ubi_update_fastmap: could not find any anchor PEB
[    6.902000] ubi0 warning: ubi_update_fastmap: Unable to write new fastmap, err=-28
[    6.909000] ubi0: volume 0 ("rootfs") re-sized from 585 to 7978 LEBs
[    6.916000] ubi0: attached mtd2 (name "rootfs", size 1018 MiB)
[    6.922000] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    6.929000] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    6.936000] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    6.943000] ubi0: good PEBs: 8140, bad PEBs: 4, corrupted PEBs: 0
[    6.949000] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[    6.956000] ubi0: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 1186053987
[    6.965000] ubi0: available PEBs: 0, total reserved PEBs: 8140, PEBs reserved for bad PEB handling: 156
[    6.975000] ubi0: background thread "ubi_bgt0d" started, PID 84
[    6.975000] ALSA device list:
[    6.975000]   No soundcards found.
[    7.048000] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 85
[    7.143000] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    7.150000] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    7.160000] UBIFS (ubi0:0): FS size: 1011617792 bytes (964 MiB, 7967 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    7.171000] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
[    7.177000] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 92BFD608-21E3-475F-941D-6FCD0816D553, small LPT model
[    7.191000] VFS: Mounted root (ubifs filesystem) on device 0:12.
[    7.198000] devtmpfs: mounted
[    7.201000] Freeing unused kernel memory: 268K (8096d000 - 809b0000)
[    7.208000] This architecture does not have kernel memory protection.
[    8.502000] EXT4-fs (sda1): recovery complete
[    8.523000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    8.673000] tpm: loading out-of-tree module taints kernel.
[    8.680000] usbcore: registered new interface driver tpm
[   11.873000] dvb: module_layout: kernel tainted.
[   11.877000] Disabling lock debugging due to kernel taint
[   13.857000] input: dreambox remote control (native) as /devices/virtual/input/input0
[   13.868000] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
[   13.918000] DVB: registering new adapter (dvb0)
[   13.928000] platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-T/T2/C)...
[   13.937000] platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-T/T2/C)...
[   13.945000] platform dvb0.0: DVB: registering adapter 0 frontend 2 (DVB-T/T2/C)...
[   13.956000] platform dvb0.0: DVB: registering adapter 0 frontend 3 (DVB-T/T2/C)...
[   14.346000] input: front panel as /devices/virtual/input/input2
[   15.305000] SGI XFS with security attributes, realtime, no debug enabled
[   15.769000] rtl8192cu: Chip version 0x11
[   15.860000] rtl8192cu: Board Type 0
[   15.864000] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[   15.870000] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[   15.876000] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   15.877000] usbcore: registered new interface driver rtl8192cu
[   17.610000] NET: Registered protocol family 10
[   17.982000] rtl8192cu: MAC auto ON okay!
[   18.020000] rtl8192cu: Tx queue select: 0x05
[   18.469000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   19.559000] wlan0: authenticate with 00:37:b7:36:9c:4c
[   19.576000] wlan0: send auth to 00:37:b7:36:9c:4c (try 1/3)
[   19.596000] wlan0: authenticated
[   19.602000] wlan0: associate with 00:37:b7:36:9c:4c (try 1/3)
[   19.627000] wlan0: RX AssocResp from 00:37:b7:36:9c:4c (capab=0x431 status=0 aid=2)
[   19.642000] wlan0: associated
[   19.645000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  198.275000] platform dvb0.0: DVB: registering adapter 0 frontend 4 (vtuner)...
[  198.283000] Unhandled kernel unaligned access[#1]:
[  198.283000] CPU: 0 PID: 885 Comm: mediasrv Tainted: GF          O    4.8.3 #1
[  198.283000] task: cfe36080 task.stack: cee84000
[  198.283000] $ 0   : 00000000 10008700 00000001 00010000
[  198.283000] $ 4   : e11f8730 e11f8454 00000000 80dc1000
[  198.283000] $ 8   : 0000001c 803cb2d4 00000000 ffffffff
[  198.283000] $12   : 00000000 00265a35 00000000 00000001
[  198.283000] $16   : e11f8120 e11f8720 803caf20 80070000
[  198.283000] $20   : e11f8730 ced34000 80940000 e0d6d020
[  198.283000] $24   : 00000003 8043aa5c
[  198.283000] $28   : cee84000 cee85cc0 cee85e38 e0ae50d8
[  198.283000] Hi    : 0002e2a9
[  198.283000] Lo    : 678c0000
[  198.283000] epc   : e0ae5108 __67a1d0+0x150/0x1d0 [dvb]
[  198.283000] ra    : e0ae50d8 __67a1d0+0x120/0x1d0 [dvb]
[  198.283000] Status: 10008703 KERNEL EXL IE
[  198.283000] Cause : 00800010 (ExcCode 04)
[  198.283000] BadVA : 00000009
[  198.283000] PrId  : 00025a11 (Broadcom BMIPS5000)
[  198.283000] Modules linked in: ipv6 rtl8192cu rtl_usb rtl8192c_common rtlwifi mac80211 xfs libcrc32c dvb(OF) modloader2(O) modloader(O) tpm(O)
[  198.283000] Process mediasrv (pid: 885, threadinfo=cee84000, task=cfe36080, tls=74470930)
[  198.283000] Stack : cf5cb510 cf801f68 cee85d30 cfcf0280 e11f9b80 e11f9b80 00000037 80938530
[  198.283000]    ceeb8200 80940000 cf128a40 80432690 cee85e38 00000000 00000001 cee85e38
[  198.283000]    ceeb8200 807d0390 809c0000 cfcf0300 cf128a40 ceeb8200 00000000 cf8a3880
[  198.283000]    00000000 80137d14 cee85e38 cf950440 ceeb8200 8015955c 00000037 00000002
[  198.283000]    ceeb8208 ceeb8200 cf128a40 00000000 ceeb8208 80137c48 00000006 8012f34c
[  198.283000]    ...
[  198.283000] Call Trace:
[  198.283000] [<e0ae5108>] __67a1d0+0x150/0x1d0 [dvb]
[  198.283000] [<80432690>] misc_open+0x168/0x1e0
[  198.283000] [<80137d14>] chrdev_open+0xcc/0x1dc
[  198.283000] [<8012f34c>] do_dentry_open.isra.2+0x26c/0x468
[  198.283000] [<80142e9c>] path_openat+0x180/0x1134
[  198.283000] [<80145074>] do_filp_open+0xc8/0x120
[  198.283000] [<80130c08>] do_sys_open+0x1a0/0x280
[  198.283000] [<80015dd4>] syscall_common+0x34/0x58
[  198.283000]
[  198.283000]
[  198.283000] Code: 26140610  8ea20000  02802021 <8c450008> 0240f809  2406007c  3c02e0ae  2442468c  ae020634
[  198.487000] ---[ end trace d65f12db6d13c65a ]---
root@et10000:~#
 
I have had the same issue, switched to openpli for the moment, everything working okay, relieved
 
Last edited by a moderator:
I'm no expert, I used the very latest openpli 4, dated 17/2. Since I had updated my openvix and lost the sundtek USB I had to revert an older vix image but it kept crashing. Eventually the machine wouldn't even reboot. I tried flashing the latest openpli and I have things pretty much where they were with the sundtek working great.
 
My sundtek is working fine with latest vix image on an ET5000...
 
As I said, I'm no expert. My ET8000 flashed with the latest vix without any problems, but I couldn't get the sundtek set up. Every time the box wouldn't reboot, and I tried everything. I'll try the vix again when I get the idea that the issue has been sorted.
 
As I said I'm no expert, I flashed the latest vix with no problems but I couldn't install the sundtek. My ET8000 wouldn't reboot and I tried it multiple times in multiple ways. It worked first time on openpli. I will try vix again when issue is resolved.
 
FozzyBear said:
I will try vix again when issue is resolved.
Click to expand...
Let's hope it won't be too long, it's not been working on the new kernel for over a month now, and no progress has been made as far as I'm aware.
 
Anyone having this issue SCROLL TO BOTTOM OF THIS GITHUB COMMIT AND POST A COMPLAINT IN THE COMMENTS AT THE BOTTOM.

Code: 
https://github.com/oe-alliance/oe-alliance-core/commit/e131668d76b81bb7c14983f6b5cc76e7df6d1c4e
 
Just flashed my ET10000 with ViX 5.0. Problem seems to be the same.
 
5.0.003 - still the same issues (rtl8192cu wifi no better either.)
 
Just had a reply on GitHub....

wait, new update coming use old image and dont update
Click to expand...

Looks promising.
 
birdman said:
A reply to what? There's nothing on the thread attached to the original commit, nor to my rejected pull request (despite me asking questions on both).
Click to expand...

Captain replied to ccs on Github OE-A
 
birdman said:
A reply to what? There's nothing on the thread attached to the original commit, nor to my rejected pull request (despite me asking questions on both).
Click to expand...
I opened up an issue, as requested, and 6 weeks later, after adding another comment today, there was a reply, as @twol has indicated.

Sicilian said:
Please report your USB tuner issue on github here https://github.com/oe-alliance/oe-alliance-core/commit/e131668d76b81bb7c14983f6b5cc76e7df6d1c4e
Click to expand...

Hopefully, a new update means what it says, rather than the (obvious) solution of going back to the original kernel.
 
ccs said:
I opened up an issue, as requested, and 6 weeks later, after adding another comment today, there was a reply, as @twol has indicated.
Hopefully, a new update means what it says, rather than the (obvious) solution of going back to the original kernel.
Click to expand...
You optimist:):)
 
ccs said:
I opened up an issue, as requested, and 6 weeks later, after adding another comment today, there was a reply, as @twol has indicated.
Click to expand...
Except that he last comment on that thread was mine - 9 days ago. The original request from Sicilian was
Code: 
Please report your USB tuner issue on github here 
https://github.com/oe-alliance/oe-alliance-core/commit/e131668d76b81bb7c14983f6b5cc76e7df6d1c4e
, and that's the one I'm looking at.
 
birdman said:
Except that he last comment on that thread was mine - 9 days ago. The original request from Sicilian was
Code: 
Please report your USB tuner issue on github here 
https://github.com/oe-alliance/oe-alliance-core/commit/e131668d76b81bb7c14983f6b5cc76e7df6d1c4e
, and that's the one I'm looking at.
Click to expand...
Check the issues button at the top of that link, you'll find it there.
 
You must log in or register to reply here.

Similar threads

L
[VU+ Ultimo4K] solved - external USB drives not coming back - UDEV ?
2
Replies
24
Views
2K
twol
twol
B
[Zgemma H7] Box crashes in "About" or "MultiBoot Image Selector"
Replies
15
Views
1K
bulmers
B
A
[OS-mio] Continual freeze and lockup with 6.6
Replies
6
Views
2K
ArloGuthrie
A
adm
[ET10x00] Boot up spalsh screen changes?
Replies
10
Views
2K
adm
adm
Huevos
  • Locked
OpenViX 6.7 Released!
Replies
7
Views
7K
Huevos
Huevos

OpenViX Feeds Status

Back
Top