[SF4008] record symbol constantly on

[john doe]

Receiver always showing red record symbol on the front panel. cant see any option in recording setting. I had this same symbol with openatv 6.0

 

[adm]

Receiver always showing red record symbol on the front panel. cant see any option in recording setting. I had this same symbol with openatv 6.0

My original Miraclebox had the same 'problem'. If time-shift was selected the box was always recording into the time-shift buffer and the record icon was always showing. Perhaps your box has the same type of recording implementation. See if the front panel icon disappears if you turn automatic time-shift off. Menu -> Setup -> System -> Time-shift Settings -> Automatically start time-shift after = disabled.

 

[birdman]

My original Miraclebox had the same 'problem'.

...but the image now contains code to correct this.
If we knew which device file controlled the symbol, and how many different states it has (the Miraclebox one has 4) then it is quite likely that this box could be added to the same fix.

john doe, would you be able to login to the box and run some commands for testing?

 

[john doe]

My original Miraclebox had the same 'problem'. If time-shift was selected the box was always recording into the time-shift buffer and the record icon was always showing. Perhaps your box has the same type of recording implementation. See if the front panel icon disappears if you turn automatic time-shift off. Menu -> Setup -> System -> Time-shift Settings -> Automatically start time-shift after = disabled.

if I do this, i'll be unable to use pause etc.

 

[john doe]

...but the image now contains code to correct this.
If we knew which device file controlled the symbol, and how many different states it has (the Miraclebox one has 4) then it is quite likely that this box could be added to the same fix.

john doe, would you be able to login to the box and run some commands for testing?

happy to do this, if you can forward the commands and will report back. i'll be in/out today so may not be able to reply asap

 

[twol]

Octagon have accepted it as an issue to fix.

 

[bassethound]

See my post 255 for a workaround it worked for me on ATV 6 not tried Vix yet

http://www.world-of-satellite.com/s...-SF4008-4K-UHD-2160p-Linux-E2-Receiver/page17

 

[john doe]

See my post 255 for a workaround it worked for me on ATV 6 not tried Vix yet

http://www.world-of-satellite.com/s...-SF4008-4K-UHD-2160p-Linux-E2-Receiver/page17

tried this already mate but cant find similar information in recording setting in vix. no biggy, as twol explains, octagon are aware. hopefully fixed in near future.

plus birdman may send the commands to run some tests

 

[birdman]

happy to do this, if you can forward the commands and will report back. i'll be in/out today so may not be able to reply asap

You have to login and go the the directory fo device files for the front-panel:

cd /proc/stb/lcd

Find out what is there:

ls

Look through the list and see what might be a likely candidate for noting recordings.
On an MBTwin this is symbol_circle. On an et8000 it's symbol_recording (but that model works with the "normal" ViX code). Then you need to put 1 then 0 into this to check you have the right one.
Say you think it is symbol_recording.

 echo 1 > symbol_recording

check tha the red light comes on (obviosuly do this when tehre is no actual recording running).
Then

 echo 0 > symbol_recording

and check it switches it off.

Once you've found the right file, try echo 2 to is as well, just in case that has a different display (the MBTwin has 4 different display symbols), then echo 3, etc, until you find out how many display states it has.

 

[john doe]

will get back to you later today

 

[john doe]

View attachment commands recording symbol issues.txt

You have to login and go the the directory fo device files for the front-panel:

cd /proc/stb/lcd

Find out what is there:

ls

Look through the list and see what might be a likely candidate for noting recordings.
On an MBTwin this is symbol_circle. On an et8000 it's symbol_recording (but that model works with the "normal" ViX code). Then you need to put 1 then 0 into this to check you have the right one.
Say you think it is symbol_recording.

 echo 1 > symbol_recording

check tha the red light comes on (obviosuly do this when tehre is no actual recording running).
Then

 echo 0 > symbol_recording

and check it switches it off.

Once you've found the right file, try echo 2 to is as well, just in case that has a different display (the MBTwin has 4 different display symbols), then echo 3, etc, until you find out how many display states it has.

hi Birdman

not sure if ive done this right. if I haven't please let me know. files attached above .

 

[birdman]

View attachment 53024

hi Birdman

not sure if ive done this right. if I haven't please let me know.

Thanks. The results indicate it only has 1 state (well, 1 on state - it also has an off state).
It might be interesting to see what happens if you echo 1 to the symbol_record_1 and symbol_record_2 files?

 

[john doe]

Thanks. The results indicate it only has 1 state (well, 1 on state - it also has an off state).
It might be interesting to see what happens if you echo 1 to the symbol_record_1 and symbol_record_2 files?

root@sf4008:/proc/stb/lcd# echo 1 > symbol_recording 1
root@sf4008:/proc/stb/lcd# echo 1 > symbol_recording 2

what is shown is below. no info
root@sf4008:/proc/stb/lcd#

 

[ccs]

root@sf4008:/proc/stb/lcd# echo 1 > symbol_recording 1
root@sf4008:/proc/stb/lcd# echo 1 > symbol_recording 2

what is shown is below. no info
root@sf4008:/proc/stb/lcd#

I think @birdman is asking what happens to the recording symbol.

 

[john doe]

I think @birdman is asking what happens to the recording symbol.

still on with the two commands

 

[ccs]

Try switching it off first using echo 0 > symbol_recording
before trying those 2 commands.

 

[john doe]

using echo 1 symbol_recording1 with box switch off and then switching on the record symbol disappears.

using echo 2 symbol_recording2 with box switch off and then switching on the symbol is showing.

 

[ccs]

Try switching it off first using echo 0 > symbol_recording
before trying those 2 commands.

Sorry, by "it" I meant the recording symbol.

@birdman, sorry to have jumped in, I'll leave it with you now.

 

[birdman]

still on with the two commands

Except you left of the second "_", at least you have from your posts.

Anyway - I assume the box shows up as a boxtype "sf4008", so download this file, unzip it, put the resulting RecordTimer.py into /usr/lib/enigma2/python on you box (take a copy of the RecordTimer.pyo that is already there first) then restart enigma2 (init4 then init 3).

Then start/stop a recording and see what happens to the icon.

Edit:
Whoops! Here's the file:

View attachment RecordTimer.zip

 

[john doe]

Except you left of the second "_", at least you have from your posts.

Anyway - I assume the box shows up as a boxtype "sf4008", so download this file, unzip it, put the resulting RecordTimer.py into /usr/lib/enigma2/python on you box (take a copy of the RecordTimer.pyo that is already there first) then restart enigma2 (init4 then init 3).

Then start/stop a recording and see what happens to the icon.

Edit:
Whoops! Here's the file:

View attachment 53025

done the above and added file and restarted. the symbol was showing at first, started recording (The Voice) for 30 secs and stopped it. symbol gone. restarted GUI, symbol not showing. restarted fully, symbol showing.