[VU+ Duo2] Recording IPTV - hangs box \ glitches - but works fine on older image

[manikm]

Changing from IPTV to DVB in E-chanellizer is only for the EPG.
It just renames the code of the IPTV CH to the relevant code for the DVB CH so it will appear in your EPG.

Thanks for clarification. When set to iptv it flashes up buffering and I've had audio sync, but when using dvb it doesn't do this.

Sent from my SM-G935F using Tapatalk

 

[abu baniaz]

Please do not post links to other sat forum. Upload the image here

 

[manikm]

Please do not post links to other sat forum. Upload the image here

Sorry mod

Sent from my SM-G935F using Tapatalk

 

[lincsat]

The only difference I see is if the service ID starts with 4097, then it's IPTV mode, if it starts with a 1 then it's DVB mode. Some IPTV services don't stream with the 1 at the start. E_Channelizer never added the correct Service ID for me, I had to do that manually. I recorded several channels at once with just a single IPTV sub, not a multi-room.

To get an OE2 bouquet list, when downloading from a X-C site, just select the OE2 from the dropdown box. If you were sent a link, it probably looks like this

http://host:port/get.php?username=xxxxx&password=xxxxx&type=[COLOR="#FF0000"]m3u[/COLOR]&output=ts

Try changing to this and download instead

http://host:port/get.php?username=xxxxxx&password=xxxxx&type=[COLOR="#FF0000"]dreambox[/COLOR]&output=ts

 

[dfox]

The only difference I see is if the service ID starts with 4097, then it's IPTV mode, if it starts with a 1 then it's DVB mode. Some IPTV services don't stream with the 1 at the start. E_Channelizer never added the correct Service ID for me, I had to do that manually. I recorded several channels at once with just a single IPTV sub, not a multi-room.

To get an OE2 bouquet list, when downloading from a X-C site, just select the OE2 from the dropdown box. If you were sent a link, it probably looks like this

http://host:port/get.php?username=xxxxx&password=xxxxx&type=[COLOR="#FF0000"]m3u[/COLOR]&output=ts

Try changing to this and download instead

http://host:port/get.php?username=xxxxxx&password=xxxxx&type=[COLOR="#FF0000"]dreambox[/COLOR]&output=ts

I wonder why it will only let me record the channel I am watching then. As soon as i change channel it stops the recording. But the Recording light is still flashing. I'll try what you suggested. Thanks

Sent from my SM-J320FN using Tapatalk

 

[manikm]

Interesting. Thanks lincsat . Is this on a latest image . Do u not get any breakup or pixelation?

Sent from my SM-G935F using Tapatalk

 

[manikm]

im not interested in more than one recording, thats just a bonus, i'd just like to be able to record say a film from IPTV and be able to play it back, without any pixelation \ breakup.
currently i can ONLY do this using an ancient image - Apollo v24

 

[lincsat]

I had build 13 as detailed previously. I'm currently updating to 16 and can try again later. I've not recorded more than 20 minutes of IPTV, so can't say for a full film. IPTV can pixelate and freeze a lot anyway, are you sure the source was OK.

 

[manikm]

I had build 13 as detailed previously. I'm currently updating to 16 and can try again later. I've not recorded more than 20 minutes of IPTV, so can't say for a full film. IPTV can pixelate and freeze a lot anyway, are you sure the source was OK.

with build v24, i have NO pixelation or breakup whatsoever, when i test with anything current, pixelation straight away on either record, or playback.
definitely not the source at fault.
i will try the changing M3U to Dreambox as you mentioned later on, with a current build, and see if that helps.

 

[dfox]

I have done loads of testing and it's impossible to record multiple channels with a single IPTV connection, unless you record channels still accessible with the internal tuners from sat dish or cable connection.

Sent from my SM-J320FN using Tapatalk

 

[Andy_Hazza]

I have done loads of testing and it's impossible to record multiple channels with a single IPTV connection, unless you record channels still accessible with the internal tuners from sat dish or cable connection.

Sent from my SM-J320FN using Tapatalk

I agree totally. [emoji1360]


Sent from my iPhone using Tapatalk

 

[lincsat]

I have done loads of testing and it's impossible to record multiple channels with a single IPTV connection, unless you record channels still accessible with the internal tuners from sat dish or cable connection.

Sent from my SM-J320FN using Tapatalk

Then try a different provider if using a Pay server or try some free streams, works for me.

 

[Andy_Hazza]

Yeah free streams will be fine to record, but you are restricted via the other methods as discussed previously.


Sent from my iPhone using Tapatalk

 

[manikm]

Ok. Update. I've now done what lincsat suggested and guess what. It works!! Thank you. The mistake I was making was to use a .m3u file from provider rather than the .tv file
Since using the .tv file recordings work. I even tried a timed recording of a stream which works great. Finally I can use updated images. Thanks to everyone who posted on here

Sent from my SM-G935F using Tapatalk

 

[manikm]

Update I can record two at same time. No problem

Sent from my SM-G935F using Tapatalk

 

[Blu-ray]

Andy_Hazza Impossible squire. The Impossible we can do Miracles take a little longer. Nice one Manikm.:thumbsup:


Sent from my iPhone using Tapatalk

 

[dfox]

You haven't explained yourself very well. Is this solely on IPTV? is it a mix of free streams and others? I can record 2 as well as I have 2 connections. It's not rocket science

Sent from my SM-J320FN using Tapatalk

 

[manikm]

1 connection. 2 iptv streams. Not free. Cocky

Sent from my SM-G935F using Tapatalk

 

[stevesom]

Ok. Update. I've now done what lincsat suggested and guess what. It works!! Thank you. The mistake I was making was to use a .m3u file from provider rather than the .tv file
Since using the .tv file recordings work. I even tried a timed recording of a stream which works great. Finally I can use updated images. Thanks to everyone who posted on here

How did you change from .m3u to .tv?

 

[Andy_Hazza]

The mistake I was making was to use a .m3u file from provider rather than the .tv file

How did you change from .m3u to .tv?

He already posted what you needed to do


Sent from my iPhone using Tapatalk