Superb quality and spec AB-Com PULSe 4K SE. Crazy offer! Only £99! FREE UK DELIVERY! 4K UHD, Enigma 2, Multiboot 4 images & more!...
Superb quality and spec AB-Com PULSe 4K Rev II Twin Satellite tuner only £149! FREE UK DELIVERY! 4K UHD, Enigma 2, SATA HDD facility, Multiboot 4 images & more!...

Ultimo 4K with HDMI 1.4 TV/AVR

Trial

Moderator
Joined
Jul 27, 2011
Messages
5,174
Reaction score
27
Points
48
Age
65
Location
germania
Hi,
does anyone has a 4K-Box (I tested Solo 4K and Ultimo 4K) with a TV or AVR which only has HDMI 1.4 (4K only with 24/25/30Hz)? Could you test the following:
connect to box with telnet and then:

cd /proc/stb/video
echo 2160p25 >videomode

Normal 4K mode is either 2160p50 or 2160p60 which older 4K devices cannot handle. With the telnet commands the box will be set to 2160p25 which might work. My Samsung showed that the box delivers 2160p25 but the question is still are there more differences between HDMI 2 and 1.4. If this trick works (someone sees a picture in 4K from the box) maybe the format 2160p25 and 2160p30 should be available in video settings to select.

ciao
 
Last edited:
i did have a 4k tv which was 1.4 HDMI connected to sf4008, but could only get 1080p to work. I can try yo test tomorrow, or even this afternoon, depending
 
Telnet test

Tested with sf4008 and old LG smart TV 4k with HDMI 1.4 ports.

Results in picture. didn't work

1.4HDMI.webp
 
Last edited:
It probably should be videomode, not videmode.
 
Hi,
yes of course my mistake. videomode is correct.

Ralf
 
sorry this has taken longer than expected, with work.

just tested now.

putty ok after spelling issue- see picture

setting resolution worked on 1.4hdmi port LG TV 4K the TV is about 3 and half years old- see picture. you can cleary see 2160p set

tuner fail - I received tuner failed when trying to open BBC, channel 4 or ITV. tried re-tuning and changing the sat cable around between tuner I and 2 on the receiver- see picture.

However, I can confirm that IPTV worked fine, looked great!

sorry picture not aligned



noraml channel.webpputty outcome.webpsettings resolution.webptuner failed.webp
 
Hi,
it looks as if 25/30 will not make it in the image as it is seen as not useful or so.

ciao
 
We did used to have these settings but where removed. I'll look into it.
Hi,
as a workaround in latest image Ar will switch to 25/30 for 4K will workaround.

Ciao

Gesendet von meinem SGP621 mit Tapatalk
 

OpenViX Feeds Status

Back
Top