[VU+ Solo4K] usb drive

[alan1812]

n this before but everything got deleted off my pen drive for no reason and since then I get this I have tried about 6 pen drives in the front or rear usb ports

 

[cactikid]

Have you done a format on windows pc first and format to fat32.

Power off box insert usb and power on and see if you can initialize the usb and when done you should see ext4

Is this usb going to be left in box permanently.

 

[alan1812]

tried that and still the same it seems to initialize ok thanks for the reply

 

[alan1812]

after i initialize it i still get this

 

[JonMMM]

What are you trying to do with the stick, looking at the size I am guessing its for flashing, if so dont worry about initializing just format to fat 32 and copy your image over

 

[alan1812]

use it for picons and epg but it keeps losing it in epg settings only hd or flash and picons get deleted also keep a back up on it but that gets deleted i can initializing it and flash using front usb it will work fine for a while then all gone and always got that error on it

 

[alan1812]

sorry this one

 

[Joe_90]

sorry this one
View attachment 62191

Your mount points look wrong. Your Internal disk (/dev/sda1) should be mounted as /media/hdd and the USB stick mounted as /media/usb surely? I presume you want to use the HDD for your recordings etc? You could also use it for EPG. The EPG is maintained in memory and only saved to HDD at shutdown or on reboot. If you have sufficient internal flash you could store the picons there. Otherwise specify a folder on the USB drive (mounted as /media/usb) to keep the picons. It's right not to keep picons on the HDD as it needs to spin up the disk to load them when you change channel.

 

[alan1812]

wiped everything and flashed the box so a complete fresh install

 

[alan1812]

ok this where i am at the moment managed to get box to flash from usb
the box will read usb if no media or if there is a movie on it
but still says error on initialize settings
i have 9 new pen drives all the same
not got a clue why

 

[cactikid]

Use 8gb or less for flashing and follow the guides.

Are you using a mac or windows pc?

 

[Huevos]

Can someone else check this on a Vu 4k.

 

[ccs]

I get a similar error on an Ultimo4k (5.5.013.010.P3 with the recent commit to HarddiskSetup.py), initially an external bus error and then initialise....

10:20:23.8401 [eRCDeviceInputDev] emit: 1
10:20:23.8413 [InfoBarGenerics] Key: 352 (Make) KeyID='KEY_OK' Binding='('OK',)'.
10:20:23.8414 [ActionMap] Keymap 'OkCancelActions' -> Action = 'ok'.
10:20:23.8432 [Harddisk] [diskSize]: stat.f_blocks: 1903872 stat.f_bsize: 8192
10:20:23.8443 [Skin] Processing screen 'HarddiskSetup', position=(0, 0), size=(1920 x 1080) for module 'HarddiskSetup'.
10:20:23.8494 [Skin] Error in screen 'HarddiskSetup' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: Component with name 'initializetext' was not found in skin of screen 'HarddiskSetup'!  Please contact the skin's author!!
10:20:23.8499 Traceback (most recent call last):
10:20:23.8500   File "/usr/lib/enigma2/python/skin.py", line 1164, in processWidget
    attributes = screen[wname].skinAttributes = []
10:20:23.8501 KeyError: 'initializetext'
10:20:23.8502 
During handling of the above exception, another exception occurred:

10:20:23.8502 Traceback (most recent call last):
10:20:23.8503   File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
    p(w, context)
10:20:23.8504   File "/usr/lib/enigma2/python/skin.py", line 1166, in processWidget
    raise SkinError("Component with name '%s' was not found in skin of screen '%s'" % (wname, name))
10:20:23.8505 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: Component with name 'initializetext' was not found in skin of screen 'HarddiskSetup'!  Please contact the skin's author!
10:20:23.8567 [Skin] Processing screen 'SimpleSummary' from list 'HarddiskSetupSummary, ScreenSummary, HarddiskSetup_summary, SimpleSummary', position=(0, 0), size=(800 x 480) for module 'ScreenSummary'.
10:20:24.1760 [eInputDeviceInit] 0 160 (352) 1
10:20:24.1761 [eRCDeviceInputDev] emit: 0
10:20:24.1776 [InfoBarGenerics] Key: 352 (Break) KeyID='KEY_OK' Binding='('OK',)'.
10:20:34.2737 [eInputDeviceInit] 1 18f (399) 1
10:20:34.2738 [eRCDeviceInputDev] emit: 1
10:20:34.2751 [InfoBarGenerics] Key: 399 (Make) KeyID='KEY_GREEN' Binding='('GREEN',)'.
10:20:34.2753 [ActionMap] Keymap 'ShortcutActions' -> Action = 'green'.
10:20:34.2754 [HarddiskSetup] answer: False
10:20:34.2776 [Skin] Processing screen 'MessageBox', position=(0, 0), size=(1920 x 1080) for module 'MessageBox'.
10:20:34.2936 [Screen] Warning: Skin is missing element 'icon' in <class 'Screens.MessageBox.MessageBox'>(Do you really want to initialise this device?
All the data on the device will be lost!
You can continue watching TV while this is running.).10:20:34.2938 
10:20:34.2974 [Pixmap] setPixmapNum(0) failed! defined pixmaps: []
10:20:34.2983 [Skin] Processing screen 'MessageBox_summary' from list 'MessageBoxSummary, ScreenSummary, MessageBox_summary, SimpleSummary', position=(0, 0), size=(800 x 480) for module 'ScreenSummary'.
10:20:34.5040 [eInputDeviceInit] 0 18f (399) 1
10:20:34.5041 [eRCDeviceInputDev] emit: 0
10:20:34.5058 [InfoBarGenerics] Key: 399 (Break) KeyID='KEY_GREEN' Binding='('GREEN',)'.
10:20:34.5909 [eInputDeviceInit] 1 18f (399) 1
10:20:34.5910 [eRCDeviceInputDev] emit: 1
10:20:34.5923 [InfoBarGenerics] Key: 399 (Make) KeyID='KEY_GREEN' Binding='('GREEN',)'.
10:20:34.5925 [ActionMap] Keymap 'MsgBoxActions' -> Action = 'alwaysOK'.
10:20:34.5973 [Harddisk] Initializing storage device...
10:20:34.5975 [Harddisk] [diskSize]: stat.f_blocks: 1903872 stat.f_bsize: 8192
10:20:34.5976 [Harddisk] Disk size: 15596 MB.
10:20:34.5977 [Harddisk] UnMountTask - init
10:20:34.5980 [Harddisk] Creating partition.
10:20:34.5981 [Harddisk] Creating filesystem.
10:20:34.5983 [Harddisk] Mounting storage device.
10:20:34.5984 [Harddisk] Initialization complete.
10:20:34.5985 [Harddisk] UnMountTask - prepare
10:20:34.6010 [eConsoleAppContainer] Starting umount
10:20:34.6016 [Task] execute: 0 umount -f /media/usb
10:20:34.6060 [Skin] Processing screen 'JobView', position=(0, 0), size=(1920 x 1080) for module 'JobView'.
10:20:34.6146 [Skin] Error in screen 'JobView' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'cancelable' was not found in screen 'JobView'!  Please contact the skin's author!!
10:20:34.6151 Traceback (most recent call last):
10:20:34.6152   File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
    p(w, context)
10:20:34.6153   File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
    raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
10:20:34.6153 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'cancelable' was not found in screen 'JobView'!  Please contact the skin's author!
10:20:34.6155 [Skin] Error in screen 'JobView' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'cancelable' was not found in screen 'JobView'!  Please contact the skin's author!!
10:20:34.6157 Traceback (most recent call last):
10:20:34.6158   File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
    p(w, context)
10:20:34.6159   File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
    raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
10:20:34.6160 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'cancelable' was not found in screen 'JobView'!  Please contact the skin's author!
10:20:34.6161 [Skin] Error in screen 'JobView' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'finished' was not found in screen 'JobView'!  Please contact the skin's author!!
10:20:34.6168 Traceback (most recent call last):
10:20:34.6169   File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
    p(w, context)
10:20:34.6170   File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
    raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
10:20:34.6170 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'finished' was not found in screen 'JobView'!  Please contact the skin's author!
10:20:34.6172 [Skin] Error in screen 'JobView' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'finished' was not found in screen 'JobView'!  Please contact the skin's author!!
10:20:34.6174 Traceback (most recent call last):
10:20:34.6175   File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
    p(w, context)
10:20:34.6176   File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
    raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
10:20:34.6177 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'finished' was not found in screen 'JobView'!  Please contact the skin's author!
10:20:34.6178 [Skin] Error in screen 'JobView' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'backgroundable' was not found in screen 'JobView'!  Please contact the skin's author!!
10:20:34.6181 Traceback (most recent call last):
10:20:34.6182   File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
    p(w, context)
10:20:34.6183   File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
    raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
10:20:34.6183 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'backgroundable' was not found in screen 'JobView'!  Please contact the skin's author!
10:20:34.6185 [Skin] Error in screen 'JobView' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'backgroundable' was not found in screen 'JobView'!  Please contact the skin's author!!
10:20:34.6187 Traceback (most recent call last):
10:20:34.6188   File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
    p(w, context)
10:20:34.6189   File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
    raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
10:20:34.6189 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'backgroundable' was not found in screen 'JobView'!  Please contact the skin's author!
10:20:34.6223 [Screen] Warning: Skin is missing element 'HelpWindow' in <class 'Screens.TaskView.JobView'>.
10:20:34.6262 [Skin] Processing screen 'JobView_summary' from list 'JobViewSummary, ScreenSummary, JobView_summary, SimpleSummary', position=(0, 0), size=(800 x 480) for module 'ScreenSummary'.
10:20:34.7150 [eInputDeviceInit] 0 18f (399) 1
10:20:34.7151 [eRCDeviceInputDev] emit: 0
10:20:34.7171 [InfoBarGenerics] Key: 399 (Break) KeyID='KEY_GREEN' Binding='('GREEN',)'.
10:20:35.8982 [eConsoleAppContainer] Starting hdparm
10:20:35.8997 [Task] execute: 0 hdparm -z /dev/sdb
10:20:35.9250 [Task] [Rereading partition table.  b'\n/dev/sdb:\n']
10:20:35.9439 [Hotplug] Connection made.
10:20:35.9448 [Hotplug] Data received: 'ACTION=remove, DEVPATH=/dev/sdb1, PHYSDEVPATH=/block//device'.
10:20:35.9456 [Hotplug] Connection lost.
10:20:35.9459 [Hotplug] Calling processHotplugData, reason = [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionDone'>: Connection was closed cleanly.
] eventData = {'ACTION': 'remove', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block//device'}.10:20:35.9459 
10:20:35.9460 [Hotplug] DEBUG: {'ACTION': 'remove', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block//device'}
10:20:35.9461 [Hotplug] DEBUG: device = /dev/sdb1 action = remove mediaState = None physDevPath = /block//device dev = sdb1
10:20:35.9462 [Harddisk] Evaluating hotplug disconnected device...
10:20:35.9463 [Harddisk] Unmounting partition 'sdb1'.
10:20:35.9464 [Harddisk] Removing storage device 'sdb'.
10:20:35.9464 [Harddisk] Hotplug disconnection complete.
10:20:36.9273 [eConsoleAppContainer] Starting parted
10:20:36.9286 [Task] execute: 0 parted -a opt -s /dev/sdb mklabel gpt mkpart primary 0% 100%
10:20:38.3786 [Hotplug] Connection made.
10:20:38.3794 [Hotplug] Data received: 'ACTION=add'.
10:20:38.3800 [Hotplug] Data received: 'ACTION=add, DEVPATH=/dev/sdb1'.
10:20:38.3805 [Hotplug] Data received: 'ACTION=add, DEVPATH=/dev/sdb1, PHYSDEVPATH=/block/sdb/device'.
10:20:38.3812 [Hotplug] Connection lost.
10:20:38.3814 [Hotplug] Calling processHotplugData, reason = [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionDone'>: Connection was closed cleanly.
] eventData = {'ACTION': 'add', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block/sdb/device'}.10:20:38.3815 
10:20:38.3815 [Hotplug] DEBUG: {'ACTION': 'add', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block/sdb/device'}
10:20:38.3816 [Hotplug] DEBUG: device = /dev/sdb1 action = add mediaState = None physDevPath = /block/sdb/device dev = sdb1
10:20:38.3817 [Harddisk] Evaluating hotplug connected device...
10:20:38.3817 [Harddisk] DEBUG: device = 'sdb1', physDevice = '/block/sdb/device'
10:20:38.3842 [Harddisk] Found storage device 'sdb1' (Removable = True).
10:20:38.3860 [Harddisk] Device 'sdb' (External (ERROR) - Kingston (DataTraveler 2.0)) -> '/dev/sdb' -> '/dev/sdb'.
10:20:38.3863 [Harddisk] Found partition 'sdb1', description = 'DataTraveler 2.0 (Partition 1)', device = '/sys/devices/rdb.3/f0470300.ehci_v2/usb3/3-1/3-1:1.0/host3/target3:0:0/3:0:0:0'.
10:20:38.3872 main infobar is not execing... so we ignore hotplug event!
10:20:38.3877 [Harddisk] Hotplug connection complete.
10:20:39.2070 [eConsoleAppContainer] Starting mkfs.ext4
10:20:39.2085 [Task] execute: 0 mkfs.ext4 -T largefile -N 499072 -m0 -O dir_index /dev/sdb1
10:20:39.2153 [Harddisk] MkfsTask - [Mkfs] mke2fs 1.45.6 (20-Mar-2020)
10:20:39.2154 
10:20:40.0401 [Harddisk] MkfsTask - [Mkfs] /dev/sdb1 is mounted; will not make a filesystem here!
10:20:40.0402 
10:20:40.0404 [Task] >>> Error: [<Components.Task.ReturncodePostcondition object at 0xb045dec8>]
10:20:40.0414 [Task] job Components.Task.Job name=Initializing storage device... #tasks=9 completed with [<Components.Task.ReturncodePostcondition object at 0xb045dec8>] in Components.Task.Task name=Creating filesystem.
10:20:40.0416 [Task] unrecoverable task failure
10:20:40.0417  Initializing storage device...
Error: mke2fs 1.45.6 (20-Mar-2020)
/dev/sdb1 is mounted; will not make a filesystem here!10:20:40.0417 
10:20:40.0441 [Skin] Processing screen 'MessageBoxSimple' from list 'MessageBoxSimple, MessageBox', position=(480, 532), size=(960 x 15) for module 'MessageBox'.
10:20:40.0546 [Screen] Warning: Skin is missing element 'icon' in <class 'Screens.MessageBox.MessageBox'>(Initializing storage device...
Error: mke2fs 1.45.6 (20-Mar-2020)
/dev/sdb1 is mounted; will not make a filesystem here!).10:20:40.0547 
10:20:40.0554 [Pixmap] setPixmapNum(3) failed! defined pixmaps: []
10:20:40.0577 [Skin] Processing screen 'MessageBoxSimple_summary' from list 'MessageBoxSimpleSummary, MessageBoxSummary, ScreenSummary, MessageBoxSimple_summary, MessageBox_summary, SimpleSummary', position=(0, 0), size=(800 x 480) for module 'ScreenSummary'.
10:20:40.0596 [Task] not retrying job.
10:20:40.0654 [Task] job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
10:20:51.6181 [eDVBVideo0] VIDEO_GET_EVENT PROGRESSIVE_CHANGED 1
10:20:52.1201 [VideoHardware] setting aspect: 16:9
10:20:52.1205 [VideoHardware] setting wss: auto
10:20:52.1207 [VideoHardware] setting policy: panscan

 

[ccs]

Unmounting /media/usb allows it to be initialised ok.

Still shows as error in menu/information/devices, even after a reboot, but telnet and FileZilla access to /media/usb is ok.

A filesystem check on /media/usb crashed...

11:20:01.1065   File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
    raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
11:20:01.1066 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'backgroundable' was not found in screen 'JobView'!  Please contact the skin's author!
11:20:01.1100 [Screen] Warning: Skin is missing element 'HelpWindow' in <class 'Screens.TaskView.JobView'>.
11:20:01.1139 [Skin] Processing screen 'JobView_summary' from list 'JobViewSummary, ScreenSummary, JobView_summary, SimpleSummary', position=(0, 0), size=(800 x 480) for module 'ScreenSummary'.
11:20:01.1195 [Task] [Unmount.  b"umount: can't unmount /media/usb: Device or resource busy\n"]
11:20:01.1204 [Harddisk] UnmountTask - Error: Failed to remove path '/media/usb': [Errno 16] Device or resource busy: '/media/usb'
11:20:01.1207 [Task] >>> Error: [<Components.Task.ReturncodePostcondition object at 0xb0496388>, <Components.Task.ReturncodePostcondition object at 0xb0467f70>]
11:20:01.1226 [Task] job Components.Task.Job name=Checking filesystem... #tasks=4 completed with [<Components.Task.ReturncodePostcondition object at 0xb0496388>, <Components.Task.ReturncodePostcondition object at 0xb0467f70>] in Components.Task.Task name=Unmount.
11:20:01.1231 Traceback (most recent call last):
11:20:01.1231   File "/usr/lib/enigma2/python/Components/Task.py", line 230, in processFinished
11:20:01.1249     self.finish()
11:20:01.1251   File "/usr/lib/enigma2/python/Components/Task.py", line 247, in finish
11:20:01.1262     self.callback(self, not_met)
11:20:01.1265   File "/usr/lib/enigma2/python/Components/Task.py", line 95, in taskCallback
11:20:01.1272     self.callback(self, task, res)
11:20:01.1274   File "/usr/lib/enigma2/python/Components/Task.py", line 402, in jobDone
11:20:01.1284     if not job.onFail(job, task, problems):
11:20:01.1286   File "/usr/lib/enigma2/python/Components/Task.py", line 395, in notifyFailed
11:20:01.1296     print("[Task] unrecoverable task failure\n", job.name + "\n" + _("Error") + ': %s' % (problems[0].getErrorMessage(task)))
11:20:01.1297   File "/usr/lib/enigma2/python/Components/Task.py", line 548, in getErrorMessage
11:20:01.1306     log = ''.join(task.log).strip()
11:20:01.1307 TypeError: sequence item 0: expected str instance, bytes found
11:20:01.1308 [ePyObject] (CallObject(<bound method Task.processFinished of <Components.Harddisk.UnmountTask object at 0xb0467be0>>,(1,)) failed)

 

[Huevos]

I see the same. Fully functional but shows an error. Can anyone not using a Vu 4k see the error?

 

[ccs]

... just edited my previous post.

 

[Huevos]

log = ''.join(task.log).strip()

Try:

log = b''.join(task.log).strip()

 

[ccs]

... no longer crashes, there's no report on the screen when the check finishes.

11:55:06.7069 [Skin] Processing screen 'JobView_summary' from list 'JobViewSummary, ScreenSummary, JobView_summary, SimpleSummary', position=(0, 0), size=(800 x 480) for module 'ScreenSummary'.
11:55:06.7182 [eConsoleAppContainer] Starting fsck.ext4
11:55:06.7191 [Task] execute: 0 fsck.ext4 -f -p /dev/sdb1
11:55:07.0100 [eInputDeviceInit] 0 160 (352) 1
11:55:07.0101 [eRCDeviceInputDev] emit: 0
11:55:07.0119 [InfoBarGenerics] Key: 352 (Break) KeyID='KEY_OK' Binding='('OK',)'.
11:55:07.0442 [Task] [Checking disk.  b'/dev/sdb1: 13/954720 files (0.0% non-contiguous), 86596/3812199 blocks\n']
11:55:07.0547 [Harddisk] MountTask - prepare
11:55:07.0550 [Harddisk] MountTask - Error: Failed to remove '/dev/nomount' file: [Errno 2] No such file or directory: '/dev/nomount.sdb'
11:55:07.0575 [Harddisk] MountTask - let udev complete the job
11:55:07.0577 [eConsoleAppContainer] Starting /bin/sh
11:55:07.0581 [Task] execute: 0 sleep 2; hdparm -z /dev/sdb
11:55:09.1051 [Task] [Mount.  b'\n/dev/sdb:\n']
11:55:09.1103 [Hotplug] Connection made.
11:55:09.1114 [Hotplug] Data received: 'ACTION=remove, DEVPATH=/dev/sdb1, PHYSDEVPATH=/block//device'.
11:55:09.1122 [Hotplug] Connection lost.
11:55:09.1124 [Hotplug] Calling processHotplugData, reason = [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionDone'>: Connection was closed cleanly.
] eventData = {'ACTION': 'remove', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block//device'}.11:55:09.1125 
11:55:09.1126 [Hotplug] DEBUG: {'ACTION': 'remove', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block//device'}
11:55:09.1127 [Hotplug] DEBUG: device = /dev/sdb1 action = remove mediaState = None physDevPath = /block//device dev = sdb1
11:55:09.1127 [Harddisk] Evaluating hotplug disconnected device...
11:55:09.1128 [Harddisk] Unmounting partition 'sdb1'.
11:55:09.1131 main infobar is not execing... so we ignore hotplug event!
11:55:09.1136 [Harddisk] Removing storage device 'sdb'.
11:55:09.1137 [Harddisk] Hotplug disconnection complete.
11:55:09.2952 [Hotplug] Connection made.
11:55:09.2960 [Hotplug] Data received: 'ACTION=add, DEVPATH=/dev/sdb1, PHYSDEVPATH=/block/sdb/device'.
11:55:09.2969 [Hotplug] Connection lost.
11:55:09.2971 [Hotplug] Calling processHotplugData, reason = [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionDone'>: Connection was closed cleanly.
] eventData = {'ACTION': 'add', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block/sdb/device'}.11:55:09.2971 
11:55:09.2972 [Hotplug] DEBUG: {'ACTION': 'add', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block/sdb/device'}
11:55:09.2973 [Hotplug] DEBUG: device = /dev/sdb1 action = add mediaState = None physDevPath = /block/sdb/device dev = sdb1
11:55:09.2975 [Harddisk] Evaluating hotplug connected device...
11:55:09.2975 [Harddisk] DEBUG: device = 'sdb1', physDevice = '/block/sdb/device'
11:55:09.2996 [Harddisk] Found storage device 'sdb1' (Removable = True).
11:55:09.3012 [Harddisk] Device 'sdb' (External (ERROR) - Kingston (DataTraveler 2.0)) -> '/dev/sdb' -> '/dev/sdb'.
11:55:09.3019 [Harddisk] Found partition 'sdb1', description = 'DataTraveler 2.0 (Partition 1)', device = '/sys/devices/rdb.3/f0470300.ehci_v2/usb3/3-1/3-1:1.0/host2/target2:0:0/2:0:0:0'.
11:55:09.3038 main infobar is not execing... so we ignore hotplug event!
11:55:09.3043 [Harddisk] Hotplug connection complete.
11:55:10.1113 [Task] job Components.Task.Job name=Checking filesystem... #tasks=4 completed with [] in None
11:55:17.1019 [eInputDeviceInit] 1 8b (139) 1
11:55:17.1020 [eRCDeviceInputDev] emit: 1
11:55:17.1036 [InfoBarGenerics] Key: 139 (Make) KeyID='KEY_MENU' Binding='('MENU',)'.
11:55:17.1038 [ActionMap] Keymap 'InfobarMenuActions' -> Action = 'mainMenu'.
11:55:17.1066 [Skin] Processing screen 'menu_mainmenu' from list 'menu_mainmenu, Menu', position=(0, 0), size=(1920 x 1080) for module 'MainMenu'.
11:55:17.1195 [Skin] Processing screen 'MenuSummary' from list 'menu_mainmenuSummary, MenuSummary, ScreenSummary, menu_mainmenu_summary, Menu_summary, SimpleSummary', position=(0, 0), size=(800 x 480) for module 'MenuSummary'.
11:55:17.4381 [eInputDeviceInit] 0 8b (139) 1
11:55:17.4382 [eRCDeviceInputDev] emit: 0
11:55:17.4398 [InfoBarGenerics] Key: 139 (Break) KeyID='KEY_MENU' Binding='('MENU',)'.
11:55:19.4406 [eInputDeviceInit] 1 ae (174) 1
11:55:19.4406 [eRCDeviceInputDev] emit: 1
11:55:19.4421 [InfoBarGenerics] Key: 174 (Make) KeyID='KEY_EXIT' Binding='('EXIT',)'.
11:55:19.7769 [eInputDeviceInit] 0 ae (174) 1
11:55:19.7770 [eRCDeviceInputDev] emit: 0
11:55:19.7783 [InfoBarGenerics] Key: 174 (Break) KeyID='KEY_EXIT' Binding='('EXIT',)'.
11:55:19.7784 [ActionMap] Keymap 'OkCancelActions' -> Action = 'cancel'.

 

[twol]

So can you try this change to Harddisk.... copy to /usr/lib/enigma2/python/Components(Before copying: in putty init 4, after copying: in putty init 6)

 

[ccs]

Looks the same, shows "error" in information/devices, but I can move recordings to the usb location and play them.

Tried formatting and then filesystem check....

15:25:10.7062 [eInputDeviceInit] 1 160 (352) 1
15:25:10.7063 [eRCDeviceInputDev] emit: 1
15:25:10.7078 [InfoBarGenerics] Key: 352 (Make) KeyID='KEY_OK' Binding='('OK',)'.
15:25:10.7079 [ActionMap] Keymap 'MsgBoxActions' -> Action = 'ok'.
15:25:10.7126 [Harddisk] Checking filesystem...
15:25:10.7128 [Harddisk] UnMountTask - init
15:25:10.7150 [Harddisk] Filesystem type is 'ext4'.
15:25:10.7153 [Harddisk] Check complete.
15:25:10.7154 [Harddisk] UnMountTask - prepare
15:25:10.7176 [eConsoleAppContainer] Starting umount
15:25:10.7182 [Task] execute: 0 umount -f /media/usb
15:25:10.7223 [Skin] Processing screen 'JobView', position=(0, 0), size=(1920 x 1080) for module 'JobView'.
15:25:10.7302 [Skin] Error in screen 'JobView' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'cancelable' was not found in screen 'JobView'!  Please contact the skin's author!!
15:25:10.7306 Traceback (most recent call last):
15:25:10.7307   File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
    p(w, context)
15:25:10.7308   File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
    raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
15:25:10.7309 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'cancelable' was not found in screen 'JobView'!  Please contact the skin's author!
15:25:10.7311 [Skin] Error in screen 'JobView' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'cancelable' was not found in screen 'JobView'!  Please contact the skin's author!!
15:25:10.7313 Traceback (most recent call last):
15:25:10.7314   File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
    p(w, context)
15:25:10.7315   File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
    raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
15:25:10.7316 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'cancelable' was not found in screen 'JobView'!  Please contact the skin's author!
15:25:10.7317 [Skin] Error in screen 'JobView' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'finished' was not found in screen 'JobView'!  Please contact the skin's author!!
15:25:10.7319 Traceback (most recent call last):
15:25:10.7320   File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
    p(w, context)
15:25:10.7321   File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
    raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
15:25:10.7322 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'finished' was not found in screen 'JobView'!  Please contact the skin's author!
15:25:10.7323 [Skin] Error in screen 'JobView' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'finished' was not found in screen 'JobView'!  Please contact the skin's author!!
15:25:10.7326 Traceback (most recent call last):
15:25:10.7327   File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
    p(w, context)
15:25:10.7327   File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
    raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
15:25:10.7328 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'finished' was not found in screen 'JobView'!  Please contact the skin's author!
15:25:10.7329 [Skin] Error in screen 'JobView' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'backgroundable' was not found in screen 'JobView'!  Please contact the skin's author!!
15:25:10.7332 Traceback (most recent call last):
15:25:10.7333   File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
    p(w, context)
15:25:10.7333   File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
    raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
15:25:10.7334 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'backgroundable' was not found in screen 'JobView'!  Please contact the skin's author!
15:25:10.7335 [Skin] Error in screen 'JobView' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'backgroundable' was not found in screen 'JobView'!  Please contact the skin's author!!
15:25:10.7338 Traceback (most recent call last):
15:25:10.7339   File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
    p(w, context)
15:25:10.7340   File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
    raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
15:25:10.7341 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'backgroundable' was not found in screen 'JobView'!  Please contact the skin's author!
15:25:10.7373 [Screen] Warning: Skin is missing element 'HelpWindow' in <class 'Screens.TaskView.JobView'>.
15:25:10.7412 [Skin] Processing screen 'JobView_summary' from list 'JobViewSummary, ScreenSummary, JobView_summary, SimpleSummary', position=(0, 0), size=(800 x 480) for module 'ScreenSummary'.
15:25:10.7505 [eConsoleAppContainer] Starting fsck.ext4
15:25:10.7522 [Task] execute: 0 fsck.ext4 -f -p /dev/sdb1
15:25:11.0427 [eInputDeviceInit] 0 160 (352) 1
15:25:11.0428 [eRCDeviceInputDev] emit: 0
15:25:11.0444 [InfoBarGenerics] Key: 352 (Break) KeyID='KEY_OK' Binding='('OK',)'.
15:25:11.0863 [Task] [Checking disk.  b'/dev/sdb1: 13/954720 files (0.0% non-contiguous), 86596/3812199 blocks\n']
15:25:11.0969 [Harddisk] MountTask - prepare
15:25:11.0971 [Harddisk] MountTask - Error: Failed to remove '/dev/nomount' file: [Errno 2] No such file or directory: '/dev/nomount.sdb'
15:25:11.0997 [Harddisk] MountTask - let udev complete the job
15:25:11.0999 [eConsoleAppContainer] Starting /bin/sh
15:25:11.1003 [Task] execute: 0 sleep 2; hdparm -z /dev/sdb
15:25:13.1483 [Task] [Mount.  b'\n/dev/sdb:\n']
15:25:13.1558 [Hotplug] Connection made.
15:25:13.1573 [Hotplug] Data received: 'ACTION=remove, DEVPATH=/dev/sdb1, PHYSDEVPATH=/block//device'.
15:25:13.1597 [Hotplug] Connection lost.
15:25:13.1600 [Hotplug] Calling processHotplugData, reason = [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionDone'>: Connection was closed cleanly.
] eventData = {'ACTION': 'remove', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block//device'}.15:25:13.1601 
15:25:13.1602 [Hotplug] DEBUG: {'ACTION': 'remove', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block//device'}
15:25:13.1603 [Hotplug] DEBUG: device = /dev/sdb1 action = remove mediaState = None physDevPath = /block//device dev = sdb1
15:25:13.1604 [Harddisk] Evaluating hotplug disconnected device...
15:25:13.1605 [Harddisk] Unmounting partition 'sdb1'.
15:25:13.1608 main infobar is not execing... so we ignore hotplug event!
15:25:13.1615 [Harddisk] Removing storage device 'sdb'.
15:25:13.1616 [Harddisk] Hotplug disconnection complete.
15:25:13.3394 [Hotplug] Connection made.
15:25:13.3403 [Hotplug] Data received: 'ACTION=add, DEVPATH=/dev/sdb1, PHYSDEVPATH=/block/sdb/device'.
15:25:13.3417 [Hotplug] Connection lost.
15:25:13.3420 [Hotplug] Calling processHotplugData, reason = [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionDone'>: Connection was closed cleanly.
] eventData = {'ACTION': 'add', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block/sdb/device'}.15:25:13.3420 
15:25:13.3421 [Hotplug] DEBUG: {'ACTION': 'add', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block/sdb/device'}
15:25:13.3422 [Hotplug] DEBUG: device = /dev/sdb1 action = add mediaState = None physDevPath = /block/sdb/device dev = sdb1
15:25:13.3422 [Harddisk] Evaluating hotplug connected device...
15:25:13.3423 [Harddisk] DEBUG: device = 'sdb1', physDevice = '/block/sdb/device'
15:25:13.3444 [Harddisk] Found storage device 'sdb1' (Removable = True).
15:25:13.3461 [Harddisk] Device 'sdb' (External (ERROR) - Kingston (DataTraveler 2.0)) -> '/dev/sdb' -> '/dev/sdb'.
15:25:13.3464 [Harddisk] Found partition 'sdb1', description = 'DataTraveler 2.0 (Partition 1)', device = '/sys/devices/rdb.3/f0470300.ehci_v2/usb3/3-1/3-1:1.0/host2/target2:0:0/2:0:0:0'.
15:25:13.3485 main infobar is not execing... so we ignore hotplug event!
15:25:14.1546 [Task] job Components.Task.Job name=Checking filesystem... #tasks=4 completed with [] in None
15:25:18.8591 [eInputDeviceInit] 1 8b (139) 1
15:25:18.8592 [eRCDeviceInputDev] emit: 1
15:25:18.8609 [InfoBarGenerics] Key: 139 (Make) KeyID='KEY_MENU' Binding='('MENU',)'.
15:25:18.8610 [ActionMap] Keymap 'InfobarMenuActions' -> Action = 'mainMenu'.
15:25:18.8638 [Skin] Processing screen 'menu_mainmenu' from list 'menu_mainmenu, Menu', position=(0, 0), size=(1920 x 1080) for module 'MainMenu'.
15:25:18.8763 [Skin] Processing screen 'MenuSummary' from list 'menu_mainmenuSummary, MenuSummary, ScreenSummary, menu_mainmenu_summary, Menu_summary, SimpleSummary', position=(0, 0), size=(800 x 480) for module 'MenuSummary'.
15:25:19.1947 [eInputDeviceInit] 0 8b (139) 1
15:25:19.1948 [eRCDeviceInputDev] emit: 0
15:25:19.1963 [InfoBarGenerics] Key: 139 (Break) KeyID='KEY_MENU' Binding='('MENU',)'.
15:25:22.1859 [eInputDeviceInit] 1 67 (103) 1
15:25:22.1860 [eRCDeviceInputDev] emit: 1
15:25:22.1875 [InfoBarGenerics] Key: 103 (Make) KeyID='KEY_UP' Binding='('UP',)'.
15:25:22.5216 [eInputDeviceInit] 0 67 (103) 1
15:25:22.5217 [eRCDeviceInputDev] emit: 0
15:25:22.5233 [InfoBarGenerics] Key: 103 (Break) KeyID='KEY_UP' Binding='('UP',)'.

NB I'm using the P3 image.