[VU+ Duo2] wierd stand-by behaviour

[GiP]

Hi,

recently I noticed that when I press the "stand-by" button the STB goes black, I mean no image, no LCd no display , nothing for about 15-20 seconds, then tha lcd appear and everything seems OK,
Is this normal? From what I remember there was no delay.

G

 

[deltec]

No there’s no delay

 

[GiP]

Hi,

I just updated Vix and the problem seems to have disappeared,

G

 

[GiP]

Hi,

I just updated Vix and the problem seems to have disappeared,

G

Nope, it's doing it again, I have no idea why, but it doesn't seem to have any other bad effects...
Maybe I'll try a reinstall from USB and see if it's some kind of corruption.

G

 

[Huevos]

Nope, it's doing it again, I have no idea why, but it doesn't seem to have any other bad effects...
Maybe I'll try a reinstall from USB and see if it's some kind of corruption.

G

Switch on debug logs and after it does this weird thing save the log and post it here..

 

[GiP]

I tried with the Debug on, but either the required reboot or the fact that debug was on ( I had this happen with software I wrote...) fixed things.
After more than two days and several on-off it never happened again. Switched Deb( I don't know if there is a limit with it on) off and we'll see what happens.

G

 

[birdman]

After more than two days and several on-off it never happened again. Switched Deb( I don't know if there is a limit with it on) off and we'll see what happens.

Turning debug logs on only gets the output written to a file, rather than it disappearing into /dev/null.
It doesn't alter any code that is executed by enigma2 - the message get printed anyway.

 

[GiP]

Hi,

finally I have the debug log with the delay.
I don't know if it can be useful to understand what's in the file, but I had the debug on for a couple days and the first time I had the 15-20sec delay I immediately disabled the debug and rebooted (I had to stop a record first).

G

 

[GiP]

Hi,
I updated to 6.4 but the weird behaviour is still there....

I made a log, but for a while all it seemed OK, then it happened again not the 15-20sec as before but about 9-10sec.
I tink the relevant part is this (from the button presses to go into standby and the one that switched it on again)
I'll upload the entire log too...
G

<440407.6119> [InfoBarGenerics] Key: 116 (Break) KeyID='KEY_POWER' Binding='('POWER',)'.
<440407.8267> [AVSwitch] portlist is ['HDMI', 'YPbPr', 'RCA', 'Scart']
<440407.8713> [Standby] enter standby
<440407.8792> [eDVBCAService] free slot 0 demux 0 for service 1:0:19:10E1:3E8:13E:820000:0:0:0:
<440407.8793> [eDVBCAService] free service 1:0:19:10E1:3E8:13E:820000:0:0:0:
<440407.9143> [eTSMPEGDecoder] decoder state: play, vpid=ffffffff, apid=ffffffff
<440407.9143> [eDVBPCR0] DEMUX_STOP ok
<440407.9144> [eDVBPCR0] destroy
<440407.9144> [eDVBVideo0] DEMUX_STOP  ok
<440407.9154> [eDVBVideo0] VIDEO_STOP ok
<440407.9180> [eDVBVideo0] destroy
<440407.9181> [eDVBAudio0] AUDIO_STOP ok
<440407.9242> [eDVBAudio0] DEMUX_STOP ok
<440407.9242> [eDVBAudio0] AUDIO_CONTINUE ok
<440407.9312> [eDVBAudio0] destroy
<440407.9313> [decoder][eDVBText] resetPID
<440407.9313> [decoder][eDVBText] freeCache
<440407.9348> [eDVBResourceManager] start release channel timer
<440407.9863> [Skin] Processing screen 'Standby', position=(0, 0), size=(1280 x 720) for module 'Standby'.
<440407.9917> [Skin] Processing screen 'StandbySummary' from list 'StandbySummary, Standby_summary, SimpleSummary, ScreenSummary', position=(0, 0), size=(140 x 32) for module 'StandbySummary'.
<440408.0563> [eDboxLCD] setLCDBrightness 0
<440408.0594> [FanControl]: setting fan values (standby mode): fanid = 0, voltage = 5, pwm = 0
<440409.8110> [gRC] main thread is non-idle! display spinner!
<440411.8433> [gRC] main thread is non-idle! display spinner!
<440415.8367> [DVBCAHandler] no more services
<440415.8429> [eDVBResourceManager] release cached channel (timer timeout)
<440415.8437> [eDVBLocalTimerHandler] remove channel 0x19bd8c8
<440415.8438> [eEPGTransponderDataReader] remove channel 0x19bd8c8
<440415.8457> [eDVBResourceManager] stop release channel timer
<440417.1796> [eInputDeviceInit] 1 74 (116) 1
<440417.1797> [eRCDeviceInputDev] emit: 1
<440417.1804> [InfoBarGenerics] Key: 116 (Make) KeyID='KEY_POWER' Binding='('POWER',)'.

 

[birdman]

Is there any particular reason why you have ~11,000 services which do not appear in any bouquets?

 

[abu baniaz]

If you perform a scan using functions in Enigma2 and nota plugin, they are not added to any bouquet by default. The last scanned always changes. I regularly watch from the orbital list. Pity selection only allows 1 letter.

 

[birdman]

If you perform a scan using functions in Enigma2 and nota plugin, they are not added to any bouquet by default.

It was really the 11,000+ services that I was wondering about. It seems a lot. Is that number normal?

 

[abu baniaz]

About normal for Motorised dish.

 

[GiP]

Is there any particular reason why you have ~11,000 services which do not appear in any bouquets?

No idea, I just downloaded a setting for HotBird and Astra and built my "favorite" from that...
I don't think I ever did a full scan...

G

 

[GiP]

No idea what the problem could be? If there is a problem....

G

 

[twol]

No idea what the problem could be? If there is a problem....

G

Do you use lcd4linux ?

 

[GiP]

Do you use lcd4linux ?

Is it the prog to modify the small screen? Yes I used that.

G

 

[twol]

Is it the prog to modify the small screen? Yes I used that.

G

Then try running without it and see if issue happens

 

[Trial]

Hi,

No idea, I just downloaded a setting for HotBird and Astra and built my "favorite" from that...
I don't think I ever did a full scan...

G

you only have Astra and Hotbird? Which settings did you download? Astra and Hotbird only have 3500-4000 services.

Rlf

 

[GiP]

Hi,

you only have Astra and Hotbird? Which settings did you download? Astra and Hotbird only have 3500-4000 services.

Rlf

It was the Vhannibal (http://www.vhannibal.net/) HB+Astra+DDT settings.

G