[GiGaBlue UHD QUAD 4K] Image Download Fails

[twol]

Flashed free slot with 6.4.010 and was able to download all 4 latest e2 images one after the other without having to restart gui.
After settig up uni-cable lnb, re-scanning channels and re-installing plugins and settings (all by hand, not from settings file), I tried again. The second download stuck at 0% and I had to restart the gui.

can I have debug log from that failure.......... in future (if not enabled) ensure you have debug logs defined and post here.

 

[Glenn2]

Just to note, I experienced this today on my gbue4k.
To diagnose the refresh rate issue (another thread) I downloaded 6.4.010, intending to clean flash to another multiboot slot for testing. I thought I may as well download 6.4.009 as well so that I could revert to that to fix the other issue if needed. But it got stuck waiting. I couldn't back out, I turned the power off to get out of it.

 

[goo]

Just to add- I also changed skin to magic (less harsh on OLED), but even when Ichanged it back to default skin it failed after first or second consecutive download.
These are the plugins and tuner settings.


Here are the latest debug logs, one before and one after it failed to download a second image (stuck at 0/100).
View attachment Enigma2_debug_2023-12-14_17-38-38.logView attachment Enigma2_debug_2023-12-14_18-02-17.log

 

[twol]

Just to add- I also changed skin to magic (less harsh on OLED), but even when Ichanged it back to default skin it failed after first or second consecutive download.
These are the plugins and tuner settings.
View attachment 65953View attachment 65954View attachment 65955

Here are the latest debug logs, one before and one after it failed to download a second image (stuck at 0/100).
View attachment 65956View attachment 65957

Thanks, need to think about this

 

[twol]

Just to note, I experienced this today on my gbue4k.
To diagnose the refresh rate issue (another thread) I downloaded 6.4.010, intending to clean flash to another multiboot slot for testing. I thought I may as well download 6.4.009 as well so that I could revert to that to fix the other issue if needed. But it got stuck waiting. I couldn't back out, I turned the power off to get out of it.

Again would love to see logs…. this is a tricky issue and apparently (so far) on gb boxes( which is where I see it, no where else)… I need your log to see if you have same issue as goo or something else….the issue is in same area, just shows differently