Problem scanning for Multistream channels. Please help.

[atef 0]

Why can't the VU+ UNO 4K SE scan for channels on the multistream frequencies available on the Hispasat 30W-5 satellite?

 

[EnoSat]

Maybe problem with MIS

Try this XML in /etc/enigma2

 

[Huevos]

Abertis does not use standard MIS transport streams and is encrypted in BISS. You need "astra-am" and read a setup guide.

You will have to google because discussing this topic is against the forum rules.

 

[atef 0]

Abertis does not use standard MIS transport streams and is encrypted in BISS. You need "astra-am" and read a setup guide.

You will have to google because discussing this topic is against the forum rules.

My dear friend, I wasn't talking about the encrypted Abertis channels.
I was talking about free multistream channels available on the Hispasat 30W-5 satellite.

 

[atef 0]

Maybe problem with MIS
View attachment 68227View attachment 68226
Try this XML in /etc/enigma2

The satellites.xml file solved the problem for one frequency, but the second frequency remains stuck without channels. Thank you.

 

[Huevos]

<transponder frequency="11491000" symbol_rate="7522000" polarization="1" fec_inner="6" system="1" modulation="2" is_id="1" pls_mode="1" pls_code="79463" />

In the standard satellites.xml you have that line. Try completely removing "is_id" and try again. e.g.

<transponder frequency="11491000" symbol_rate="7522000" polarization="1" fec_inner="6" system="1" modulation="2" pls_mode="1" pls_code="79463" />

 

[atef 0]

After deletion, the signal disappeared from the frequency.

removing "is_id"

 

[Huevos]

After deletion, the signal disappeared from the frequency.

removing "is_id"

View attachment 68237

That is not our satellites.xml.

 

[atef 0]

That is not our satellites.xml.

 

[Huevos]

So if you use is_id="0"?

 

[atef 0]

So if you use is_id="0"?

Yes, I used is_id="0" and is_id="1" to no avail. I think there's some kind of error in linux-vuplus-4.1.20

 

[atef 0]

Because the frequencies work for me on my Dreambox without any problems

 

[EnoSat]

You can still try Root 242965, but the result will probably be the same.
Or try change freq by +/- several MHz.

 

[atef 0]

You can still try Root 242965, but the result will probably be the same.
Or try change freq by +/- several MHz.

Unfortunately, it doesn't work either.

 

[atef 0]

Both frequencies work on the Dreambox without any problems and without any changes to satellites.xml. The problem is only with VU+UNO4KSE.

 

[Huevos]

So on dreambox using openvix image you can open them?

 

[atef 0]

So on dreambox using openvix image you can open them?

Yes, it works well on the Dreambox, as you can see in the pictures above. The only problem is with Vu Plus uno4kse.

 

[abu baniaz]

Worth pointing out he is using a DM820, so it is a self-build. Just in case there is code variance.

 

[atef 0]

Worth pointing out he is using a DM820, so it is a self-build. Just in case there is code variance.

The difference in my code isn't significant, but I used some patches from OpenATV.

And I think Huevos knows that.

[SystemNetworkInfo] getWanIP · atefganm/OpenViX-enigma2@6a5af7c

(cherry picked from commit d31e32dad26596002459b13872359032af3186ad) Thanks to @Huevos

github.com

 

[abu baniaz]

Is the image on the Vu+ official ViX or built from you repo?
Have you also tried official ATV on your Vu+? Did it also have the same problems you are experiencing?