[VU+ Duo4K SE] Third party Oscams not working

[bellejt]

What type of support thread are you creating?

Possible bug

What OpenViX Image build number are you using?

6.9

Have you tried re-flashing WITHOUT settings restore?

NO

Have you tried re-flashing WITH a settings restore?

YES

updated vu+ duo4K SE to 6.9 and no version of oscam will run. Not even the one out feeds .Also xstreamity teh same problem.Back to 6.8

 

[twol]

which Oscam from feeds?? I don,t see any issues on 6.9

 

[bellejt]

latest oscam .All versions I have working under 6.8 but not starting under 6.9

 

[abu baniaz]

Are you using the script method or softcam manager?

 

[bellejt]

always used manager

 

[Huevos]

latest oscam .All versions I have working under 6.8 but not starting under 6.9

Don't use a version compiled for 6.8 on 6.9.

 

[bellejt]

even the version from feeds oscam latest does not start.Will stay on 6.8 for the moment.

PS : xstreamity also not working but that is from other maker

 

[twol]

So 6.9 just tried both oscam-latest and oscam-emu - both work on all my services.
Then flipped to Xstreamity - all works.

You need to provide logs

 

[bellejt]

will do a clean flash without restore tomorrow and see.Cost me again lots off time to install all apps and picons . If no result I just stay on 6.8 : do not update a working system until it is broken.

 

[Huevos]

So 6.9 just tried both oscam-latest and oscam-emu - both work on all my services.
Then flipped to Xstreamity - all works.

You need to provide logs

Same here. Maybe something wrong with the oscam config restored by his backup.

 

[bellejt]

had some time and first did a softupdate via manager.Then dowloaded new image and installed with restore.Oscam did not start until I downloaded the one from feeds. Then all is fine and even xstreamity (old version 5.51) is working.Will check further THX

 

[bellejt]

update : only oscam from feeds works with 6.9 image .All others stopped working and do not restart. OSCam 2.26.06-11965 or same version with emu

 

[twol]

update : only oscam from feeds works with 6.9 image .All others stopped working and do not restart. OSCam 2.26.06-11965 or same version with emu

so they all need to be compiled on OE-A 6.0 otherwise error

 

[abu baniaz]

I have changed the thread to correctly reflect the issue. You can start the 3rd party oscams by command line to see why they do not start and report to the compiler so they can fix it. Or perhaps manually transferring a binary did not install a required binary.

The options used to build oscam on the ViX plugin server are as below

Build Date:     06.06.2026 13:13:30
Version:        2.26.06-11965@dd703725
Compiler:       arm-oe-linux-gnueabi
Box Type:       generic (generic)
PID:            3380
TempDir:
GBox tmp_dir:   not defined using:
ConfigDir:      /
WebifPort:      0

Web interface support:                   yes
LiveLog support:                         yes
jQuery support intern:                   yes
Embedded wiki help system:               no
Compressed pages:                        yes
SSL support:                             yes
DVB API support:                         yes
DVB API with extended CW API support:    yes
DVB API with Stream Relay support:       yes
DVB API with AZBOX support:              no
DVB API with MCA support:                no
DVB API with COOLAPI support:            no
DVB API with COOLAPI2 support:           no
DVB API with STAPI support:              no
DVB API with STAPI5 support:             no
DVB API with NEUTRINO support:           no
DVB API read-sdt charsets:               yes
Anti-cascading support:                  no
Debug mode:                              yes
Monitor:                                 yes
Loadbalancing support:                   yes
Cache exchange support:                  no
CW Cycle Check support:                  no
LCD support:                             yes
LED support:                             yes
Clockfix with realtime clock:            no
IPv6 support:                            yes
ARM NEON (SIMD/MPE) support:             yes

camd 3.3x:                               no
camd 3.5 UDP:                            yes
camd 3.5 TCP:                            yes
newcamd:                                 yes
CCcam:                                   yes
CCcam share:                             yes
gbox:                                    yes
radegast:                                no
scam:                                    no
serial:                                  no
constant CW:                             yes
Pandora:                                 no
ghttp:                                   no
Streamrelay:                             yes

Reader support:                          yes

Nagra:                                   yes
Nagra Merlin:                            yes
Irdeto:                                  yes
Conax:                                   yes
Cryptoworks:                             yes
Seca:                                    yes
Viaccess:                                yes
NDS Videoguard:                          yes
DRE Crypt:                               yes
TONGFANG:                                yes
Bulcrypt:                                yes
Griffin:                                 yes
DGCrypt:                                 yes

cardreader_phoenix:                      yes
cardreader_drecas:                       no
cardreader_internal_azbox:               no
cardreader_internal_coolapi:             no
cardreader_internal_coolapi2:            no
cardreader_internal_amsmc:               no
cardreader_internal_sci:                 yes
cardreader_sc8in1:                       no
cardreader_mp35:                         no
cardreader_smargo:                       no
cardreader_pcsc:                         no
cardreader_smartreader:                  yes
cardreader_db2com:                       no
cardreader_stapi:                        no
cardreader_stapi5:                       no
cardreader_stinger:                      no

If you want to know the options used to compile the third party oscam you are using, start it by command line with the -V option. If we are missing something, we can add it. An example entry is below:

/usr/softcams/oscam-latest -V

 

[barracuda]

I also tried to compile oscam for my octagon sx88v2 with simplebuild v4, but after several attempts none of the files worked. Is it even possible to compile this new OpenViX image (OE-Alliance 6.0) with a script? In the previous version, all of this worked for me?

 

[Huevos]

I also tried to compile oscam for my octagon sx88v2 with simplebuild v4, but after several attempts none of the files worked. Is it even possible to compile this new OpenViX image (OE-Alliance 6.0) with a script? In the previous version, all of this worked for me?

Yes

 

[barracuda]

Now I finaly success.I choose the wrong toolchains.Thanks for the info that possible to compile!

I use the OpenViX image almost all the time because it works well for me, but I also like using oscam, which I can compile myself. Thanks for your good work!

 

[Huevos]

Please add your compile method.

 

[barracuda]

First you need simplebuild v4.For my stb I choose armv7_universal toolchain and then just play with settings.Here you can found all info.

https://git.streamboard.tv/common/simplebuild4/-/wikis/home