[ET8500] Adding Picons

[Delboy181251]

Still learning so please bear with me. Have watched the How to Load Picons Video on the site and it shows an example of :-
100x60.reflections-black which results in the UK channel logos that I want.
However when I download the picons I get the choice of an Aussie one, load of east or west ones and just a couple of odd choices at the end but not the above example.
I have tried a couple of random ones and my EPG setting are to Picon & name but I get no logos at all.
Which one should I choose please to achieve a result with UK logos?
Regards,

 

[Andy_Hazza]

MK 400x240 ones are the best ones imo. You can find them here >> http://www.openvix.co.uk/index.php/downloads/picons-channel-icons/mk-400x240-snp-picons/


Sent from my iPhone using Tapatalk

 

[Andy_Hazza]

Also his thread can be seen here with new additions etc >> MK Picons (28.2 and UK cable)

https://r.tapatalk.com/shareLink?ur...&share_tid=41444&share_fid=12108&share_type=t


Sent from my iPhone using Tapatalk

 

[Delboy181251]

Have solved my own problem by following another posts.
Should have looked around a bit more.
Apologies.
However, if I want to add the one you suggested instead, will it over-ride the one installed or do I have to remove that first?
Regards,

 

[Andy_Hazza]

I would personally delete the ones you have installed and replace with the new ones. Always store picons either to usb stick or internal flash (if your receiver has plenty of internal flash storage). I advise not to install to an hdd.


Sent from my iPhone using Tapatalk