af9015 DVB-T stick on VIX 2.0?

[rassi]

Anyone tested af9015 DVB-T stick on VIX 2.0?
Does it work?

Found this one from OpenPli forum


i found this instructions for iCVS image and af-9015 sticks. Maybe this is useful, i dont know.

1. In etc/opkg you need to change feed.conf file and put this in it (backup old .conf file):
http://addons.enigma2.sifteam.eu/dreambox/test/dm800se
3.Then use telnet:
opkg update
enter
4. Then use this commands:
opkg install v4l-dvb-module-dvb-usb-af9015 v4l-dvb-module-mxl5005s v4l-dvb-module-mc44s803 v4l-dvb-module-mt2060 v4l-dvb-module-qt1010 v4l-dvb-module-tda18271 v4l-dvb-module-dvb-usb v4l-dvb-module-af9013 v4l-dvb-module-dvb-pll v4l-dvb-firmware-dvb-usb-af9015
enter
5. Transfer old *.conf file to your box.
6. Transfer these two files into /tmp/ folder:
af9015-dm800se-sifteam.tar.gz
usbTunerBIN_and_start-stopSH_101217.tar.gz
prava 755
7. Use telnet again and run these commands
tar -zxf "/tmp/af9015-dm800se-sifteam.tar.gz" -C /
enter
tar -zxf "/tmp/usbTunerBIN_and_start-stopSH_101217.tar.gz" -C /

 

[rassi]

Anyone using AF9015 based DVB-T stick with VIX?
I got Kworld 395U stick which is AF9015 based.

 

[OldSkulRide]

i tried volar hd stick and it works. What you need to do is, download af9015 drivers from FEED, and then ONLY replace dvb-usb-af9015.ko file, nothing else! Reboot enigma and then the whole box and your stick should be visible and working!

 

[OldSkulRide]

I tried this method with et-5000 box too, but driver is unstable...

 

[rassi]

i tried volar hd stick and it works. What you need to do is, download af9015 drivers from FEED, and then ONLY replace dvb-usb-af9015.ko file, nothing else! Reboot enigma and then the whole box and your stick should be visible and working!

Yes! Thanks! Installed with remote access, but looks promising

dvb-usb: found a 'KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
dvb-usb: found a 'KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
dvb-usb: schedule remote query interval to 500 msecs.
dvb-usb: KWorld USB DVB-T TV Stick II (VS-DVB-T 395U) successfully initialized and connected.
usbcore: registered new driver dvb_usb_af9015

root@vuduo:~# cat /proc/bus/nim_sockets
NIM Socket 0:
        Type: DVB-S2
        Name: BCM7335 DVB-S2 NIM (internal)
        Frontend_Device: 0
NIM Socket 1:
        Type: DVB-S2
        Name: BCM7335 DVB-S2 NIM (internal)
        Frontend_Device: 1

NIM Socket 2:
        Type: DVB-T
        Name: DVB-T 2
        Frontend_Device: 2
NIM Socket 3:
        Type: DVB-C
        Name: Sundtek MediaTV Pro (USB)
        Frontend_Device: 3
root@vuduo:~#