GioppyGio
Active member
I need help my AX is stuck on boot
Superb quality and spec AB-Com PULSe 4K SE. Crazy offer! Only £99! FREE UK DELIVERY! 4K UHD, Enigma 2, Multiboot 4 images & more!...
Superb quality and spec AB-Com PULSe 4K Rev II Twin Satellite tuner only £149! FREE UK DELIVERY! 4K UHD, Enigma 2, SATA HDD facility, Multiboot 4 images & more!...
ax hd61 4k stuck on boot
- Thread starter GioppyGio
- Start date
I quick google search found the information below from ls. It says its for the AX61 but i am unsure if the ax61 4k is the same but it may help.
User will require a USB stick formatted FAT32.
1) Download your chosen image.
2) Transfer the complete zip file to root of the USB stick. Do not unzip the file.
3) Power off the AX HD61 and connect the USB stick front USB port behind front flap.
4) Power on the AX HD61, as soon as you power on HOLD DOWN TOP LEFT POWER BUTTON OR OK button on the remote.
5) Once you're booted into the Multiboot recovery menu screen below select 'Bootmenu' at the bottom and press OK on the remote.
6) On the next screen select 'Flash local image' and press OK on the remote.
7) On the next screen you select the USB stick where your image zip file is located.
8) On the next screen you'll then select the zip file that's on your USB stick that you'd like to flash and press OK on the remote.
9) You'll now select which slot you'd like to flash your image to. Remember which slot you are currently booting from and have setup. Flashing to that slot
WILL REFLASH that slot, you will loose everything you have setup in that slot. We have setup OpenViX in Slot 1, for this guide we are re-flashing OpenViX in slot 1, OpenATV is in slot 2 and we have another image already flashed to slot 3. Select Slot 1 and press ok on the remote.
10) Once completed you can select which image you'd like to boot into and press ok on the remote.
User will require a USB stick formatted FAT32.
1) Download your chosen image.
2) Transfer the complete zip file to root of the USB stick. Do not unzip the file.
3) Power off the AX HD61 and connect the USB stick front USB port behind front flap.
4) Power on the AX HD61, as soon as you power on HOLD DOWN TOP LEFT POWER BUTTON OR OK button on the remote.
5) Once you're booted into the Multiboot recovery menu screen below select 'Bootmenu' at the bottom and press OK on the remote.
6) On the next screen select 'Flash local image' and press OK on the remote.
7) On the next screen you select the USB stick where your image zip file is located.
8) On the next screen you'll then select the zip file that's on your USB stick that you'd like to flash and press OK on the remote.
9) You'll now select which slot you'd like to flash your image to. Remember which slot you are currently booting from and have setup. Flashing to that slot
WILL REFLASH that slot, you will loose everything you have setup in that slot. We have setup OpenViX in Slot 1, for this guide we are re-flashing OpenViX in slot 1, OpenATV is in slot 2 and we have another image already flashed to slot 3. Select Slot 1 and press ok on the remote.
10) Once completed you can select which image you'd like to boot into and press ok on the remote.
GioppyGio
Active member
the fact is that it is stuck on boot and on the screen that the hisilicon screen and it does not go forward and the menu to select anything does not come out
Ah ok, I believe i may have the same chip set in the qviart dual. There is a loader tool called HiTool which allows the loading of images like we use to have to do via serial ports and rs232. I don't know much more than that but it might give you a starting place to search the internet for.
GioppyGio
Active member
no access ... thank you very much for your attention, I just resumed it by inserting the atv recovery. Thanks
