[VU+ Duo2] backup crash

[twol]

finally i managed to charge through usb the opnevix VI and i found on my HDD a debug that i have tried to put here but i read the following message "The text that you have entered is too long (101722 characters). Please shorten it to 22000 characters long". How can i send to tou this debug?.

Send it as an attachment… go advanced (see bottom right) andthen you can add attachments under additional options… manage attachments

 

[miguel57]

Send it as an attachment… go advanced (see bottom right) andthen you can add attachments under additional options… manage attachments

i have 2 debugsView attachment Enigma2_debug_2022-05-11_06-05-56.logView attachment Enigma2_debug_2022-04-02_20-26-59.log.

 

[Huevos]

What am I looking at? This is a log of running CrossEPG 6 weeks ago.

 

[miguel57]

What am I looking at? This is a log of running CrossEPG 6 weeks ago.

Those are the only reports that i have on my HDD.

 

[Joe_90]

Those are the only reports that i have on my HDD.

The debug logs are in /home/logs/ by default, unless you changed the location when you set up debugging in the menu.

 

[miguel57]

The debug logs are in /home/logs/ by default, unless you changed the location when you set up debugging in the menu.

That is right. So i collected the debug from home/logs, and i had, i do not know why, two "debugs" on my HDD, related to EPG. The problem is that when the vu duo2 collapse i have to reflash it again through usb, so there is not any debug report about the problem, because the receiver is starting again from zero. So, ¿How can i solve the problem?. Is like a snake biting its own tail (La pescadilla que se muerde la cola).

 

[Joe_90]

@twol suggested that you change the debug log location to hdd so that there would be a debug log available if you had to re-flash subsequently. So, once you manage to flash the box, go into debug log settings and change it to hdd and then reboot so that subsequent logs are on disk.

 

[miguel57]

@twol suggested that you change the debug log location to hdd so that there would be a debug log available if you had to re-flash subsequently. So, once you manage to flash the box, go into debug log settings and change it to hdd and then reboot so that subsequent logs are on disk.

I did it following your advice and i have several debugs,some of them repeated. Hee it goes...............

 

[Joe_90]

I did it following your advice and i have several debugs,some of them repeated. Hee it goes...............

Em - I am a bit confused. It looks like you are restoring an old image

<   193.5465> [Console] command: /usr/bin/ofgwrite -r -k '/media/hdd/imagebackups/imagerestore/vuplus/duo2'

after you have installed the 6.1.004 version?
Maybe just flash the latest version and do not restore anything. Just do some basic setups and perhaps then try to restore a backup (not an image).

 

[miguel57]

Em - I am a bit confused. It looks like you are restoring an old image

<   193.5465> [Console] command: /usr/bin/ofgwrite -r -k '/media/hdd/imagebackups/imagerestore/vuplus/duo2'

after you have installed the 6.1.004 version?
Maybe just flash the latest version and do not restore anything. Just do some basic setups and perhaps then try to restore a backup (not an image).

I have restored 6.1.004. So i understand that you suggest to flash again 6.1.004, make a new backup and restore it?

 

[Joe_90]

I have restored 6.1.004. So i understand that you suggest to flash again 6.1.004, make a new backup and restore it?

No - it looks like you are overwriting the install with an old image (not a backup). Backups are just settings and possibly plugin restores. What you seem to be doing is a full image restore using ofgwrite. Flash 6.1.004 and do a manual setup and see how you get on.

 

[miguel57]

What i do is firstly is to flash through usb the openvix 6, then my vu duo ask me about restore settings and plugins that i have in my HDD. I have to say that the backup i have is from the old openvix 5 and that all these problems have apperead after the installation of the new openvix 6, before openvix 6, i mean two weeks ago with openvix 5 i do not have any problem at all doing whatever i did, so i suposse something does not match betwenn openvix 5 and 6. Now you suggest to flash openvix 6 and manually set my 5 dishes on it and all other plugins i have. A very hard job

 

[twol]

What i do is firstly is to flash through usb the openvix 6, then my vu duo ask me about restore settings and plugins that i have in my HDD. I have to say that the backup i have is from the old openvix 5 and that all these problems have apperead after the installation of the new openvix 6, before openvix 6, i mean two weeks ago with openvix 5 i do not have any problem at all doing whatever i did, so i suposse something does not match betwenn openvix 5 and 6. Now you suggest to flash openvix 6 and manually set my 5 dishes on it and all other plugins i have. A very hard job

After a clean install, you can extract your sat dish settings from the settings backup and then restore them in the /etc/enigma2/settings file … not that complex and just a cut and paste is needed.

 

[miguel57]

After a clean install, you can extract your sat dish settings from the settings backup and then restore them in the /etc/enigma2/settings file … not that complex and just a cut and paste is needed.

I will try this afternoon, but is there a "settings" file in etc/enigma2 or does it have another name?

 

[twol]

I will try this afternoon, but is there a "settings" file in etc/enigma2 or does it have another name?

Its called settings

 

[miguel57]

Its called settings

I did it but i can not ftp to openvix using dcc and name: root and password openvix it said enigma2 not detected functionality limited

 

[twol]

I did it but i can not ftp to openvix using dcc and name: root and password openvix it said enigma2 not detected functionality limited

There were issues with DCC.
You can set password if you haven’t already via a telnet session e.g. via putty. login root then enter passwd (it is passwd!) and enter password 2x
Then you just use filezilla, login root and your password

 

[miguel57]

After doing everything the problem remains the same. I backup the new image and when i tried tor reinstall through image manager apears the new logo once and again without installing anything.

 

[Huevos]

Haz una foto de este logo que ves.

Intenta encargar OpenViX con un pincho USB.

 

[miguel57]

Siempre cargo openvix con un pincho usb y el logo es el nuevo logo gris de openvix 6. Ademas ayer meti manualmente CCCam 2.3.0 y CCcam.config con mi proveedor que en el openvix 5 me salia conectado cuando chequeaaba con el boton verde y ahora con esta openvix me dice cuando chequeo su estado que no puede conectar, otro problema mas que antes no tenia. Por cierto ¿estas per Xixona?.