Superb quality and spec AB-Com PULSe 4K SE. Crazy offer! Only £129! FREE UK DELIVERY! 4K UHD, Enigma 2, Multiboot 4 images & more!...
Superb quality and spec AB-Com PULSe 4K Rev II Twin Satellite tuner only £179! FREE UK DELIVERY! 4K UHD, Enigma 2, SATA HDD facility, Multiboot 4 images & more!...
[VU+ Zero4K] Blind scan transponders
- Thread starter lme
- Start date
Joe_90
Moderator
Where are you located? 55W is pretty low on the horizon from UK/Ireland. I used to receive from 58W with my 1.1m dish some years ago, but can't pick up any transponders now as I think the Europe beams were discontinued.
What box and tuner number?
lme
Member
- Joined
- Nov 30, 2018
- Messages
- 80
- Reaction score
- 1
- Points
- 8
The box brand is in the title of the post, but here it is:
It doesn't matter what satellite: it is the same issue.
Didn't have this issue with openvix-5.4.016.release-vuzero4k_usb.
B
BrokenUnusableAccount
Guest
Are you always scanning with "only scan unknown transponders" switched on?
If so try with it switched off.
If so try with it switched off.
That's why it's called blindscan. Finds unknown transponders. Why would anyone do a blindscan for known transponders? For that a regular scan is much faster.
B
BrokenUnusableAccount
Guest
But the original complaint was that i wasn't finding anything,
Are we sure there are any unknown transponders?
Are we sure there are any unknown transponders?
Probably, but anyway he is going to need a dish 1.80cm or bigger to get any sort of reasonable reception from that satellite.
lme
Member
- Joined
- Nov 30, 2018
- Messages
- 80
- Reaction score
- 1
- Points
- 8
I believe the dish 10'=3m that i have, is good enough for a "reasonable reception" !!!
the same settings was finding transponders in every image up to version 6.
lme
Member
- Joined
- Nov 30, 2018
- Messages
- 80
- Reaction score
- 1
- Points
- 8
That's all i found:
View attachment messages.txt
And this:View attachment Enigma2_debug_2021-11-19_15-25-50.log
View attachment messages.txt
And this:View attachment Enigma2_debug_2021-11-19_15-25-50.log
Last edited:
el bandido
Forum Supporter
- Joined
- Dec 22, 2013
- Messages
- 245
- Reaction score
- 58
- Points
- 28
Are any channels or services found in a regular scan?
Looks like the binary is outputting junk.
lme
Member
- Joined
- Nov 30, 2018
- Messages
- 80
- Reaction score
- 1
- Points
- 8
It is the same issue after openvix-6.0.003.release-vuzero4k!
log after upgrade from internet:View attachment Enigma2_debug_2021-11-21_16-42-16.log
not only that is not fixed, but 4 out of 5 times there is no log at all !!!
finally the log after flushing the box from usb:View attachment Enigma2_debug_2021-11-21_18-35-53.log
log after upgrade from internet:View attachment Enigma2_debug_2021-11-21_16-42-16.log
not only that is not fixed, but 4 out of 5 times there is no log at all !!!
finally the log after flushing the box from usb:View attachment Enigma2_debug_2021-11-21_18-35-53.log
Last edited:
lme
Member
- Joined
- Nov 30, 2018
- Messages
- 80
- Reaction score
- 1
- Points
- 8
so, in other words better go back to the last 5.4 working version.
Hopefully no more features are vanishing in the future 6.0 versions !
All I can tell you is the plugin sends the correct command to the binary and the binary returns rubbish.
lme
Member
- Joined
- Nov 30, 2018
- Messages
- 80
- Reaction score
- 1
- Points
- 8
the manufacturer didn't change anything in the box since i got the box, or since 5.4.016 version.
only the image has been changed, and a lot of features of the image have been altered with the introduction of py3.
So, i don't see any involvement of the manufacturer !
Last edited:
If you read the log that you posted you will see it is the manufacturer binary that is outputting junk. And that binary comes from the box manufacturer.
