[VU+ Solo2] crash after opening recordings

[IAmATeaf]

As far as I can see that entry is what the media player will attempt to open on first start, so for example mine is set to

config.movielist.last_videodir=/media/sdc1/TV Shows/Believe/

Which point to a USB portable drive but with that setting in place if I unplug the drive it reverts back to the standard /hdd/movies location.

 

[snoopy2013]

That should not be the case. And it isn't the case for me (using NFS-shares).

Hello,

but did you also set the mounts with "autofs"?

I see every one who has this problems used "autofs" - me too.

Regards

 

[Rob van der Does]

I use 'autofs' for all my boxes for quite some time already.

 

[Sirius]

I am trying to mount my solo 2 hdd to my nano in the bedroom and I too have experienced the crash just done a clean flash of build 18 on both reinstalled nfs on both went up in bedroom mounted the solos hdd using auto f's restarted the nano tried to look at the hdd, all I get is does not exist error, been trying for days now my nano just does not want to connect to my solo???

Sent from my D5503 using Tapatalk

 

[Sirius]

http://www.world-of-satellite.com/showthread.php?p=222079


This is the guide I have been following, I have tried so many times now just can not seem to get it to work.

It's probably user error at my end. But what? Can any one else get there mounts set up with build 18? Using this guide??

Sent from my D5503 using Tapatalk

 

[snoopy2013]

Good Morning,

just another question to the network-mounts with autofs to clarify that for me once more:

For me, the access to the network-mounts works fine, if I first enter the default movie folder (“/media/hdd/movie” = “media/autofs/Filme_Festplatte_Studio”) and then press the yellow button (location), choose the mounted device (for example: /media/autofs/Filme_Festplatte_Keller”) and then press ok.

What does not work is the way, to select the common parent directory as movie-path (“/media/autofs”). In this case there is allways a crash by opening the filelist.

In other images, for example Open Pli, this isn`t a problem. This solution have the advantage, that both hard drives are immediately displayed when calling the filelist and so the selection is just a little more comfortable.

I see it right, that with Open ViX Zeus so far only the first way (open standard filelist and press yellow button …) works without problems?

Conversely, if the second way ("/media/autofs" as default path when opening the movie list) works too, it would be very nice if someone could give me a concrete step by step instruction, because I have not as yet got it right ...

Regards

 

[snoopy2013]

No one here, who can give me some help to better understand the current status in terms of "autofs Mount"?

Regards

 

[Rob van der Does]

'autofs' is better in handling mount locations that are not available. Linux will skip those silently during boot (while fstab will cause issues/time delays) and retry mounting when actually needed.

 

[snoopy2013]

First of all, thanks for answer, which is known to me. Therefore I use with myself also always autofs.

But what the current state of affairs is because in the following Points?

Good Morning,

just another question to the network-mounts with autofs to clarify that for me once more:

For me, the access to the network-mounts works fine, if I first enter the default movie folder (“/media/hdd/movie” = “media/autofs/Filme_Festplatte_Studio”) and then press the yellow button (location), choose the mounted device (for example: /media/autofs/Filme_Festplatte_Keller”) and then press ok.

What does not work is the way, to select the common parent directory as movie-path (“/media/autofs”). In this case there is allways a crash by opening the filelist.

In other images, for example Open Pli, this isn`t a problem. This solution have the advantage, that both hard drives are immediately displayed when calling the filelist and so the selection is just a little more comfortable.

I see it right, that with Open ViX Zeus so far only the first way (open standard filelist and press yellow button …) works without problems?

Conversely, if the second way ("/media/autofs" as default path when opening the movie list) works too, it would be very nice if someone could give me a concrete step by step instruction, because I have not as yet got it right ...

Regards

Thank`s for help.

Regards

 

[snoopy2013]

Bug is fixed with build 023 - now it works without problems. :thumbsup:

Thank`s a lot.

Regards