Superb quality and spec AB-Com PULSe 4K SE. Crazy offer! Only £129! FREE UK DELIVERY! 4K UHD, Enigma 2, Multiboot 4 images & more!...
Superb quality and spec AB-Com PULSe 4K Rev II Twin Satellite tuner only £179! FREE UK DELIVERY! 4K UHD, Enigma 2, SATA HDD facility, Multiboot 4 images & more!...

Disk copy?

Robgh

Member
Joined
Sep 26, 2024
Messages
103
Reaction score
8
Points
18
Age
76
Location
Leeds
Is it possible to copy everything from a ssd disk installed and working in my Gigablue box to a 2nd ssd connected by a usb cable. I would log in to my box from a terminal on my Linux computer. I know it can be done on a computer by using dd, and would like to know if the same would work on my satellite receiver.

Thanks
 
Is it possible to copy everything from a ssd disk installed and working in my Gigablue box to a 2nd ssd connected by a usb cable. I would log in to my box from a terminal on my Linux computer. I know it can be done on a computer by using dd, and would like to know if the same would work on my satellite receiver.

Thanks
dd will do a block-level copy, so you should only do it if both partitions (not disks) are unmounted and the same size.

If you want to copy the contents use rsync.
 
dd will do a block-level copy, so you should only do it if both partitions (not disks) are unmounted and the same size.

If you want to copy the contents use rsync.
Thanks for that, yes I would run init 4 to stop the system running then use rysinc as you say.

The reason I am thinking of doing this is because the original ssd disk which came with the box threw up some error a few weeks ago in the middle of watching a tv program. I then had to buy another ssd disk the same size, which is in the box now.
I noticed earlier that the original ssd , a Seagate 500Gb, is also a video disk, or so it say on it. The new ssd , a Kingston 500Gb doesn't say it is a video disk, but I did do a bit of research before I picked Kingston .
I'd rather not wait until it fails , if at all, hence me wanting to change back to the Seagate ssd without having to go through flashing it and setting it up again.
 
Image on internal memory has nothing to do with the storage devices. You can change the storage device without reflashing. Just make sure your mount points are correct.

You have several threads all related to the same issue. We should really get to the bottom of it.
 
Image on internal memory has nothing to do with the storage devices. You can change the storage device without reflashing. Just make sure your mount points are correct.

You have several threads all related to the same issue. We should really get to the bottom of it.
OK, that's interesting. To be clear if I put a blank disk into the box, to replace the one which is there now, the box would still boot up ok.
I will initialize the blank disk so the mount points should be OK.
Could you please confirm
Thanks
 
Last edited:
I think you have a gigablue ? The images are stored on eMMC memory (partitions on the receiver) so nothing to do with your disks
 
Yes that is correct so I can just put a blank ssd disk in and that is all.
And here was me bothering about copying when I don't need to.
Thanks
 

OpenViX Feeds Status

Back
Top