GigaBlue UHD Quad 4K Pro - Remote Control Unit (Non Bluetooth)

[jgc115]

Brand new box and manual all in German -
So, could someone please let me know how I can make it also control my 2025 Samsung TV - just to control the power /on/off and vol +/-

Have OpenVix 6.9.002 loaded

Thank you in advance
jgc115

 

[twol]

Enable hdmi CEC in menu/setup

 

[jgc115]

Enable hdmi CEC in menu/setup

Thanks that's a good work around, but I was thinking, as with the VUPLUS, you go into setup and enter a TV code?

Also I have another issue with this box. I have a working Hauppauge Dual DVB-T/T2/C tuner stick. I downloaded the driver ct2-dvb-usb-dualhd. Configured the I and J tuners as DVB-T2 and my region etc. All seemed good, then did a scan but it did not pick up any DVB-T/T2 channels. I double checked my aerial feed was good, which it was.
Does this receiver support dual dvb-t/t2/c sticks plugged in to any of the USB ports - I've tried them all.

 

[twol]

always Q,s about usb tuners on Gigablue and no good answer …. Their answer could be that they supply a T2 tuner so why not buy that?

 

[gws]

Here is a AI translated manual if its any use to you?

 

[el bandido]

always Q,s about usb tuners on Gigablue and no good answer …. Their answer could be that they supply a T2 tuner so why not buy that?

Unfortunately for North America, we have ATSC, so USB tuners are often necessary here. For years they have had very limited support on some Enigma2 receivers because the required driver and vtuner work was never completed.

Today I have two USB ATSC tuners connected to my GigaBlue UE 4K and both are working as well as on any other Enigma2 receiver.

It would be useful if someone could test the solution by installing an image and seeing whether it works. If it does not, a good debug log would help finish the work and produce a properly verified patch.

The solution should also apply to the Vu+ Duo 4K Lite. Anyone testing should be prepared for image recovery if necessary, as I can only verify boot and operation on the GigaBlue UE 4K at present.

About 200 lines of code were changed or added, including debugging.

Shown below is my GigaBlue UE 4K watching one ATSC terrestrial channel while recording another ATSC channel. Now the receiver is more useful to me.