[VU+ Solo] Green Screen with vix

[tomcoleman]

my friend box was turned on last night and now he gets the ViX logo in top left and screen is green

what does this mean?

can i fix remotely?

 

[Rob van der Does]

If it is indeed a green screen, that means he is running an old version. So first thing would be to update. That can indeed be done remote:

init 4
opkg update && opkg upgrade && init 6

Only: if his version is too old, a flash will be needed (and maybe also a bootloader update).

 

[tomcoleman]

If it is indeed a green screen, that means he is running an old version. So first thing would be to update. That can indeed be done remote:

init 4
opkg update && opkg upgrade && init 6

Only: if his version is too old, a flash will be needed (and maybe also a bootloader update).

why would it go green though all of a sudden??

so i ssh into the box and issue those commands?

 

[silverfox0786]

green screen is a crash

we need to see logs to say why


and i wouldnt send those commands although those commands are used to update

but seems yr image is so old that it needs a clean reflash using latest image



update using commands above only valid if yr using a variend on VIX version 2.3

 

[Rob van der Does]

and i wouldnt send those commands although those commands are used to update
but seems yr image is so old that it needs a clean reflash using latest image
update using commands above only valid if yr using a variend on VIX version 2.3

Yep, you're right; this image must be too old to salvage........

 

[tomcoleman]

Yep, you're right; this image must be too old to salvage........

why would it just die though? has something auto updated?

 

[Sicilian]

Could have been anything. You should ask your friend how it was setup or if he'd changed any system settings or something.

 

[guff daddy]

I have an idea this might not be a "greenscreen" (crash) but rather the normal TV screen with a green/purple colour (depending on the original colour) - this has happened on my box a few times recently (see attached).

This has happened a few times since upgrading to the lastest version - it seems to happen overnight when in standby.

I've done a complete reflash and set up manually rather than restoring settings - let you know how it gets on (if this is indeed the problem).

 

[Rob van der Does]

why would it just die though? has something auto updated?

The craslog(s) might enlighten us.

 

[Rob van der Does]

I have an idea this might not be a "greenscreen" (crash) but rather the normal TV screen with a green/purple colour (depending on the original colour) - this has happened on my box a few times recently (see attached)...

This is an indication that RGB/Component has not been set correctly.

 

[Sicilian]

I have an idea this might not be a "greenscreen" (crash) but rather the normal TV screen with a green/purple colour (depending on the original colour) - this has happened on my box a few times recently (see attached).
View attachment 14530
This has happened a few times since upgrading to the lastest version - it seems to happen overnight when in standby.

I've done a complete reflash and set up manually rather than restoring settings - let you know how it gets on (if this is indeed the problem).

What receiver is that on? Also by the looks of it you might be using a USB tuner. Test if fixed tuner does the same thing.

 

[guff daddy]

Setup is Vu+ connected to Onkyo amp via HDMI - Onky then connects to Samsung TV via HDMI, so no RGB/Component issues.

Problem only happens overnight - and a power cycle fixes it.

 

[Sicilian]

Setup is Vu+ connected to Onkyo amp via HDMI - Onky then connects to Samsung TV via HDMI, so no RGB/Component issues.

Problem only happens overnight - and a power cycle fixes it.

Which receiver model and confirm that you where using a USB tuner as your screenshot shows Tuner C.

 

[guff daddy]

What receiver is that on? Also by the looks of it you might be using a USB tuner. Test if fixed tuner does the same thing.

It is a Vu+ Duo with a Nova Win-T DTT tuner. However, last time it happened (yesterday morning) it just had the VIX startup screen showing, rather than any particular channel. Note that the system is set up with a DTT channel (RTE1) as the startup service (so that it will immediately populate the EPG on startup).

Note - I don't want to hijack the thread away from the OP's issue - just thought from what he said it might be a similar problem

 

[Sicilian]

It is a Vu+ Duo with a Nova Win-T DTT tuner. However, last time it happened (yesterday morning) it just had the VIX startup screen showing, rather than any particular channel. Note that the system is set up with a DTT channel (RTE1) as the startup service (so that it will immediately populate the EPG on startup).

Note - I don't want to hijack the thread away from the OP's issue - just thought from what he said it might be a similar problem

Thanks for being mindful regards the OP Maybe test on a fixed tuner see if it happens.

 

[guff daddy]

Thanks for being mindful regards the OP Maybe test on a fixed tuner see if it happens.

Will do - I'll set a fixed tuner channel as startup and see...if there are any further issues I'll open a new thread. Meanwhile it might help if the OP clarifies whether it is this problem or an actual "greenscreen of death" crash he is experiencing...

 

[Markymark]

When my box is turned on or goes into standby it is green. When in standby the tv just displays loads of green lines on the screen - not sure if this is related to this issue.

 

[tomcoleman]

If it is indeed a green screen, that means he is running an old version. So first thing would be to update. That can indeed be done remote:

init 4
opkg update && opkg upgrade && init 6

Only: if his version is too old, a flash will be needed (and maybe also a bootloader update).

says

the device cant make lock file as no space???

 

[Sicilian]

says

the device cant make lock file as no space???

Re-flash, sound like the flash could have filled with data somehow.