[VU+ Solo2] HDD no longer mounted

[lfc84]

Here's what I currently get

root@vusolo2:/dev# fdisk -l
WARNING: fdisk GPT support is currently new, and therefore in an experimental phase. Use at your own discretion.

Disk /dev/sda: 500.1 GB, 500107862016 bytes, 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: gpt


#         Start          End    Size  Type            Name
 1         2048    976773119  465.8G  Microsoft basic primary

Disk /dev/mtdblock0: 235 MB, 235929600 bytes, 460800 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mtdblock1: 235 MB, 235929600 bytes, 460800 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mtdblock2: 7 MB, 7340032 bytes, 14336 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mtdblock3: 1 MB, 1048576 bytes, 2048 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes

 

[lfc84]

root@vusolo2:/dev# fsck /dev/sda1
fsck from util-linux 2.23.2
e2fsck 1.42.9 (28-Dec-2013)
/dev/sda1: recovering journal
Error reading block 33565858 (Attempt to read block from filesystem resulted in short read).  Ignore error<y>? yes
Force rewrite<y>? no
fsck.ext4: Filesystem too large to use legacy bitmaps while trying to re-open /dev/sda1

/dev/sda1: ********** WARNING: Filesystem still has errors **********

 

[lfc84]

I have successfully mounted the drive using command line. GUI didn't work. Now I get this:

root@vusolo2:/dev# df -h
Filesystem                Size      Used Available Use% Mounted on
ubi0:rootfs             194.8M     75.2M    119.5M  39% /
devtmpfs                279.4M      8.0K    279.4M   0% /dev
tmpfs                    64.0K         0     64.0K   0% /media
tmpfs                   279.6M    168.0K    279.4M   0% /var/volatile
/dev/sda1               465.6G    271.7G    192.9G  58% /media/hdd

I can now see the tv programmes that I recorded.

I am running a fsck now.

Thanks for everyone's help.

 

[lfc84]

OK, some progress.....
<snip>
The HDD should be 1TB.

In my sheer panic to revoer the HDD in the Solo2 I forgot that the 1TB is in my laptop and the disc in the Solo2 is correctly identified as a 500GB.

Thanks again for all the help

 

[Galwaysat]

I recently upgraded to Hades 11

Just went into recorded movies to find my whole 1TB hard drive is wiped. Did not initialize it and can't figure out how it happened. Hard drive was close to full but have lost all recordings and backups. Only folders now showing are time shift, movie, var and crossepg.

Anybody here come across anything similar?

 

[judge]

I recently upgraded to Hades 11

Just went into recorded movies to find my whole 1TB hard drive is wiped. Did not initialize it and can't figure out how it happened. Hard drive was close to full but have lost all recordings and backups. Only folders now showing are time shift, movie, var and crossepg.

Anybody here come across anything similar?

HDD not mounted correctly.
Check blue button -> ViX > Mount Manager, take a screenshot & add to this post if you need help with the resulting mountpoints.

 

[cactikid]

try going into movie

 

[Galwaysat]

Thanks, but hdd is mounted fine. I can record on it and see new recording in movie folder. It is the only file there as rest have disappeared.

 

[shadows]

just updated my solo to hades 11 and both my usb have unmounted and when i try to mount them just get the screen of death thanks

 

[pembo]

just updated my solo to hades 11 and both my usb have unmounted and when i try to mount them just get the screen of death thanks

start a new thread support thread with all relevant information.

 

[Galwaysat]

I recently upgraded to Hades 11

Just went into recorded movies to find my whole 1TB hard drive is wiped. Did not initialize it and can't figure out how it happened. Hard drive was close to full but have lost all recordings and backups. Only folders now showing are time shift, movie, var and crossepg.

Anybody here come across anything similar?

It just happened again overnight! HDD is mounted but all recordings I made since are gone. Think I will have to move back to earlier version.

 

[Andy_Hazza]

You must be doing something wrong. I have 4 boxes, all with HDDs and all using ViX Hades 011 and no such issues!

 

[Galwaysat]

Wish that I could figure out what I am doing wrong. Recordings were there last night and not there today. I don't remember setting anything to update overnight and did not think you could set box to auto delete everything on hdd. Seems odd that it has happened twice over the course of a few days.

 

[Andy_Hazza]

You not using tsPanel are you?


Sent from my iPhone using Tapatalk

 

[Galwaysat]

No not using ts panel. Checked again this morning and yesterday's recordings are gone and just left with a recording from today. Really weird, could it be a problem with the hard drive?

 

[abu baniaz]

Can you telnet the following command and post back result?

df -h

 

[Galwaysat]

This is what I get

Filesystem Size Used Available Use% Mounted on
ubi0:rootfs 194.8M 80.9M 113.9M 42% /
devtmpfs 279.4M 8.0K 279.4M 0% /dev
tmpfs 64.0K 0 64.0K 0% /media
/dev/sda1 931.3G 540.8M 929.8G 0% /media/hdd
/dev/sdb1 7.1G 16.3M 7.0G 0% /media/usb
tmpfs 279.

Recordings from this evening have disappeared and it is supposed to be recording now and /media/hdd is empty.

 

[Galwaysat]

Just to update, I did try another image and same thing happened. Have done a fresh install of latest Openvix and so far recordings are staying put. Only changes I have made since are some settings on black box app and password on telnet. So far so good.