Superb quality and spec AB-Com PULSe 4K SE. Crazy offer! Only £99! FREE UK DELIVERY! 4K UHD, Enigma 2, Multiboot 4 images & more!...
Superb quality and spec AB-Com PULSe 4K Rev II Twin Satellite tuner only £149! FREE UK DELIVERY! 4K UHD, Enigma 2, SATA HDD facility, Multiboot 4 images & more!...

HS7 remote dead, nearly.

Bogart

Member
Joined
Oct 21, 2019
Messages
42
Reaction score
1
Points
6
Had this receiver for a few years now and been fine except for the odd reboot needed.
Now I have the problem the remote does nothing, well nearly nothing. Remote will not switch box on or off, adjust volume, channel change well in fact basically everything.
If I switch off at the wall it comes up with Channel 1 which on mine is BBC Parliament. I cannot see HDD programmes or EPG.
If when on channel 1 I hit OK button it shows what the channel is and that channel is fine but that is it. I cannot get the remote to do anything else.
Obviously checked batteries which are ok as is evidenced by the OK button changing the screen.
A a loss.
 
Same with my remote! Have to use the "Dream EPG" app on Android, but its a right pain in the neck when you just want to change the channel or mute it quickly! Is there an alternative USB linked remote I could use? I tried a kodi usb remote, but wasn't able to map the buttons to correct functions :(
 
Had this receiver for a few years now and been fine except for the odd reboot needed.
Now I have the problem the remote does nothing, well nearly nothing. Remote will not switch box on or off, adjust volume, channel change well in fact basically everything.
If I switch off at the wall it comes up with Channel 1 which on mine is BBC Parliament. I cannot see HDD programmes or EPG.
If when on channel 1 I hit OK button it shows what the channel is and that channel is fine but that is it. I cannot get the remote to do anything else.
Obviously checked batteries which are ok as is evidenced by the OK button changing the screen.
A a loss.
They do not last for ever I had gigablue quad uhd 4k remote that stopped working after a year , basic test put camera on phone


To check if your traditional IR (infrared) remote is working, you can use your mobile phone camera since our eyes cannot see infrared light, but most phone cameras can.Open your camera: Launch the camera app on your smartphone.Point the remote: Aim the tip of the remote directly at the camera lens (about 5 to 10 centimeters away).Press a button: Press and hold any button on the remote, such as the power button.Check for light: Look at your phone's screen. If the remote is working, you will see a small, blinking purplish or white light emitting from the top of the remote.Note: If no light appears, try replacing the batteries. If it still doesn't work with fresh batteries, the remote is likely broken.
 
Tried that if I press any key the light flickers for 35 seconds then goes out. This repeats anytime a key is pressed.

Tried the tv remote that works as one would expect.
 
Last edited:
You can get a cheap replacement on amazon and its better then the original. Its not worth messing with it.
 

OpenViX Feeds Status

Back
Top