[Venton Unibox HDx] Menu button not working?!!

[beck]

Found this link for the venton uni box suport it has downloads for difrent images and drivers boot logos tools plugings and so on hear is the link for any venton users wanting to have a look
http://www.egami.to/index.php/id-down/fki

 

[Aksu]

I have updated to Helios16 and still working.

 

[docsavage]

I have similar issues on tm twin oe on helios 016..if you install a plugin and have to restart gui. You get strange flickering graphics on boot and no menu. If I do a full restart everything is back to normal.

 

[beck]

Hi aksu did you change your drivers before you flashed to Helios or after?
I was going to flash to Helios before this thing with the venton drivers started.

 

[Aksu]

History is following. When menu problen first exist i reflashed back to Zeus 5. Then all buttos worked ( previus driver pack was restored). Then i reflashed Zeus 16. Problem came back. Driver pack was updated newer version between those. Then i flashed Helios 15 ( because nothing else helped and could control box by phone) and copied dvb.ko with date stamp 16.1.2014. With that driver pack all were fixed. After that i updated to Helios 16. All worked still because there in no newer driver set on that update.

 

[beck]

OK thanks aksu the date of my drivers I had are 6/2/2014 so I it should be OK to flash Helios hopefully I won't be needing to flash the box for a verry long time bloody pain ha

 

[Sicilian]

New fixed updated drivers will be in ViX image Helios build 18 onwards.

https://github.com/oe-alliance/oe-alliance-core/commit/19c6df760b7e3c7fe6ca566efc193b38955f5b62

 

[beck]

great news Sicilian, i be able to finally flash to helios cheers :thumbsup:

 

[Sicilian]

2) Replace the drivers in lib/module/3.6.0/extras

Here's the lastest drivers as next ViX build could be another few days.

To replace the drivers do as follows: -
1) Extract the attached zip file.
2) FTP the dvb.ko file to lib/module/3.6.0/extras overwriting the existing.
3) Reboot the receiver, hold down standby button on the remote and select restart on TV.
4) Once rebooted the unit will work as required.

 

[norhap]

The fixed drivers will be in newer Vix images. You have seen the poll about new image name?

We don't normally have two concurrent threads with the same issue. Thread is now closed. Please continue in the other thread, link below.

I think move the post would have been enough(bug remote control vix-others teams).both user and staff exposed and I see nothing wrong with that.

@abu baniaz, Thanks for pointing out the post that talks about the problem and especially for telling me that the driver was not set in the helios 17.

I recognize my lack of reading, but the two sections at a receiver caused me cluelessness, he saw nothing in unibox section ...
about my problem.

lack of reading time, I went to download the driver and did not read it right up and not down that thought this post .... that was fixed in build helios 18.

thanks sicilian phoenix.

@andyblac a matter for the driver has not been modified manufacturer, at least dvb.ko since early February 2014. (work perfect en ventonsupport 3.0)

has been the compilation OE 4.0 enigma2 causing the adjustment of the driver?

 

[judge]

@andyblac a matter for the driver has not been modified manufacturer, at least dvb.ko since early February 2014. (work perfect en ventonsupport 3.0)

has been the compilation OE 4.0 enigma2 causing the adjustment of the driver?

No, it doesn't.

 

[degoosefish]

HI same issue here with Venton HD2 remote control not responding on menu and other key presses spent the last hour flashing zeus flashing helios with same problem thinking it was a bug. No good on either but then I noticed when I unplugged the LAN connection at the back and then flashed with Zeus everything worked again briefly selected a channel and then after a few minutes plugged back in LAN cable and remote has become unresponsive again

 

[judge]

HI same issue here with Venton HD2 remote control not responding on menu and other key presses spent the last hour flashing zeus flashing helios with same problem thinking it was a bug. No good on either but then I noticed when I unplugged the LAN connection at the back and then flashed with Zeus everything worked again briefly selected a channel and then after a few minutes plugged back in LAN cable and remote has become unresponsive again

Did you read post 49, only 3 posts above yours?

 

[degoosefish]

nope but I have now thanks