[VU+ Ultimo4K] No automatic boot after flashing online

[ccs]

There will be debug logs if you change their location to /media/hdd/logs.

 

[twol]

I think it's obvious that there isn't gonna be a log when i have to hard reboot because the box doesn't reboot by itself anymore. So i don't know what's going wrong.

Once more :

1. after an update the box doesn't reboot, i have to hard boot.
2. after an online flash install, same problem, i have to hard boot.
3. after a normal reboot command, the box doesn't want to reboot automatically, again i have to hard boot.

Providing you have turned on debug logs and you have on hdd or usb not flash … there will logs showing activities.
Next time it stops try using filezilla to,access the current log and copy,it to a PC, so,it can be looked at.

 

[skippie]

Mrs

Ok got 5 logs here, maybe something's coming up in there. Have been hard booting certainly within these logdates.

 

[ccs]

References in the logs to multibooting, which the ultimo4k doesn't have. Are you running a plugin to do this?

EDIT: my Ultimo4k also has similar references.

10:57:59.0976 [Console] command: mount /dev/mmcblk0p1 /tmp/getMultibootslotsz0n8tz1i
10:57:59.0978 [eConsoleAppContainer] Starting /bin/sh
10:57:59.0983 [Console] pid = 31331
10:57:59.1957 [multiboot] [getMultibootslots] Finished bootslots = {}
10:57:59.1958 [Console] command: umount /tmp/getMultibootslotsz0n8tz1i
10:57:59.1959 [eConsoleAppContainer] Starting /bin/sh
10:57:59.1964 [Console] pid = 31371
10:57:59.2064 [Console] command: mount /dev/mmcblk0p3 /tmp/getMultibootslotsz0n8tz1i
10:57:59.2065 [eConsoleAppContainer] Starting /bin/sh
10:57:59.2069 [Console] pid = 31372
10:57:59.2845 [multiboot] [getMultibootslots] Finished bootslots = {}
10:57:59.2846 [Console] command: umount /tmp/getMultibootslotsz0n8tz1i
10:57:59.2847 [eConsoleAppContainer] Starting /bin/sh
10:57:59.2851 [Console] pid = 31413
10:57:59.2947 [Console] command: mount /dev/mmcblk0p4 /tmp/getMultibootslotsz0n8tz1i
10:57:59.2948 [eConsoleAppContainer] Starting /bin/sh
10:57:59.2952 [Console] pid = 31414
10:57:59.3046 [multiboot] [getMultibootslots] Finished bootslots = {}
10:57:59.3047 [Console] command: umount /tmp/getMultibootslotsz0n8tz1i
10:57:59.3048 [eConsoleAppContainer] Starting /bin/sh
10:57:59.3052 [Console] pid = 31415
10:57:59.3207 [Misc_Options] 12Vdetect cannot open /proc/stb/misc/12V_output: Function not implemented
10:57:59.3327 [Harddisk] Enumerating block devices...
10:57:59.3493 [Harddisk] len partitions = 1, device = sda
10:57:59.3494 [Harddisk] Found storage device 'sda' (Removable=False) NoPartitions = 1.
10:57:59.3506 [Harddisk] Command: 'hdparm -S0 /dev/sda'.

/dev/sda:
setting standby to 0

 

[skippie]

Mrs

No i never used multibooting.

 

[twol]

You have a Motorised dish and one of the logs shows a tuning failure at the end of the log ……. So maybe hanging on the motorised dish
How are your tuners setup… can you post pictures? … and perhaps describe your sat setup

 

[skippie]

No, i have a dish with 4 LNB's (13E-19.2E-23.5E-28.2E).

 

[twol]

No, i have a dish with 4 LNB's (13E-19.2E-23.5E-28.2E).

So you need to post information about the setup, diseqc commands are being issued, so would like to understand more.

 

[skippie]

Mrs

1 dish with 4 LNB and 2 diseq switch boxes 4 in x 2 out each.

 

[skippie]

Strangely, as of yesterday (still on 6.00.8) my receiver booted again on his own without me switching off and on again at the back. Only thing that changed is that i replaced my broken external HDD with a new one of 2 TB. Could it be that HDD then preventing from booting properly ??? But my problem got fixed finally. Thnx for all those trying to help me. Cheers guys. Updated to the latest image yesterday evening with flashing online and the receiver booted up properly afterwards, i'm a happy man.