No Display after bootloader update

[pege63]

Am going to try the ViX-2.3.133-vuduo that worked for me last time then i comming back

 

[pege63]

switch off your box at the back switch, put the usb stick with new bootloader into the front of your box, switch on the box, wait till it tells you to reboot box then switch off the box, remove stick, [ dont switch the box on just yet ]put the stick into pc, remove the bootloader file, then put the new image on to the stick and insert to the front of the box, switch the box on and it should flash the new image...

that's the obvious way to do it, and it not working for me

 

[pege63]

Now even the old ViX-2.3.133 cant be flashed, with that bootloader that was for that file then

 

[ukdirtyboy]

switch off your box at the back switch, put the usb stick with new bootloader into the front of your box, switch on the box, wait till it tells you to reboot box then switch off the box, remove stick, [ dont switch the box on just yet ]put the stick into pc, remove the bootloader file, then put the new image on to the stick and insert to the front of the box, switch the box on and it should flash the new image...

yep thats what id did to the letter done it about fews times with a m8's and two member of my family but this time it flashed the bootloader asked me to remove and reboot box i then loaded new files ie image as per normal and the box is dead i am uploading a vidoe to youtube as we speak brb guys

 

[pege63]

where can i find trhe ViX-2.3.153-vuduo_NFI file i can connect to DOU with VU+ Util it says "IP Setup Sucess"
Is there a NFI file for the bootloader to that i must flash first?

 

[wullboy]

where can i find trhe ViX-2.3.153-vuduo_NFI file i can connect to DOU with VU+ Util it says "IP Setup Sucess"
Is there a NFI file for the bootloader to that i must flash first?

could be wrong m8, but i believe the image was not constructed to NFI format ??

 

[pege63]

can i use a nothe NFI file?
IF yes can it boot with the latest bootloader after flash?
Wath can i do now when i have connection to my DUO with VU+ UTIL?

 

[wullboy]

yep thats what id did to the letter done it about fews times with a m8's and two member of my family but this time it flashed the bootloader asked me to remove and reboot box i then loaded new files ie image as per normal and the box is dead i am uploading a vidoe to youtube as we speak brb guys

uk m8, can you diconnect any hard drive you have, remove usb, just keep your sat feeds only on the box, and fire the box up, then shut everything down, connent your router and see if you get an internet connection m8, i was asked to do this one time before m8.... worth a shot

 

[pege63]

The bootloader vuplus\duo\cfe_cfe_auto.bin is the same as for the ViX-2.3.133-vuduo_usb, why should be flashed again?

 

[ukdirtyboy]

uk m8, can you diconnect any hard drive you have, remove usb, just keep your sat feeds only on the box, and fire the box up, then shut everything down, connent your router and see if you get an internet connection m8, i was asked to do this one time before m8.... worth a shot

worth a shot will try now!

 

[ukdirtyboy]

worth a shot will try now!

no still dead

 

[wullboy]

Is it not the case of .......... ViX-2.3.133-vuduo_usb is the image...... & vuplus\duo\cfe_cfe_auto.bin is the new bootloader ???

 

[wullboy]

no still dead

M8, are all your connections ok, internal & external..??

 

[pege63]

This sux you do everything as you should and still it not working, cant flash ViX-2.3.153-vuduo_usb still

 

[ukdirtyboy]

This will explan better
and i really need to oil that chair

 

[pege63]

Hmm well my say READ USB in 1/100 sec then it says starting...

C:\>ping 192.168.2.6

Pinging 192.168.2.6 with 32 bytes of data:
Reply from 192.168.2.3: Destination host unreachable.
Reply from 192.168.2.3: Destination host unreachable.
Reply from 192.168.2.3: Destination host unreachable.
Reply from 192.168.2.3: Destination host unreachable.

Ping statistics for 192.168.2.6:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

 

[Larry-G]

Hmm well my say READ USB in 1/100 sec then it says starting... after boot but it would not READ usb stick to flash the FW

the bootloader flashes extremly fast, just try another USB stick.

 

[pege63]

the bootloader flashes extremly fast, just try another USB stick.

The bootloader flashes its the FW thats not been READ from THE USB port just for 1/100 second its says READ USN then it just jump to reading... and nothing happends

 

[ukdirtyboy]

The bootloader flashes its the FW thats not been READ from THE USB port just for 1/100 second its says READ USN then it just jump to reading... and nothing happends

the bootloader flashes extremly fast, just try another USB stick.

Tell ya what shall i just start a new topic seen as mines been hijacked and no one is reply to my problem only your pege63 after all i did start the topic

 

[ukdirtyboy]

no disrespect its just getting messy even for me to follow