Solo2 not flashing HELP

[nastyboy]

Hi

I just installed latest image for my solo2 from openvix downloads (Zeus 003) via usb

got the normal steps press power to update, which it completed

I powered off once complated and turned it back on, the lcd is stuck on starting.... and tv has purple image with vu+ logo

I have tried reflashing and using different ports, it doesnt even pick up the usb now

Any help would be appreciated

cheers

p.s, ive owned various vu+ boxes and familiar with the flash process, just cannot understand what has happened here

 

[Stanman]

If you have anything else connected, disconnect it such as USB stick etc.

Just flashed my S2 and everything went as normal

 

[judge]

I powered off once complated and turned it back on, the lcd is stuck on starting.... and tv has purple image with vu+ logo

The Solo2 reboots itself once the flash is completed.
You sure it had completed?

 

[nastyboy]

The Solo2 reboots itself once the flash is completed.
You sure it had completed?

yup it said update complete on the lcd, after which point i powered it off and back on, the rest you know

 

[nastyboy]

yup it said update complete on the lcd, after which point i powered it off and back on, the rest you know

I left it for a few mins after it said update complete, it didnt reboot after this point which is why I tunred it off and on

 

[nastyboy]

If you have anything else connected, disconnect it such as USB stick etc.

Just flashed my S2 and everything went as normal

I removed a second usb from the rear which has picons/epg,

 

[sheraz2]

can connect it via serial cable but unsure which files i need to upload to to the box

 

[cactikid]

i also use a usb that flashes and when it tells you its finished and you power off box at rear remove usb first?then power box on.