[VU+ Solo2] Tecnomate Diseqc2

[loopy123]

Hi world of sat,
I'm after some help. You sell a technomate tm-25 DISCqC 2 way switch. Would this work in my Solo2 with 3 seperate dishes ... Ie. Tuner A 28.2 Tuner B 19.2 and 13. If so can you please tell me how to configure Tuner B as I am thinking of buying one.
How would you scan Tuner I have always used simple and swaped cable and changed tuner configuration in autoboque ?
Any help appreciated

 

[world-of-satellite.co.uk]

If you have 3 separate dishes / lnb's you need at least a 3 way switch: https://www.world-of-satellite.co.u...ds31s-2-3-way-indoor-or-outdoor-diseqc-switch

Set tuner B to Diseqc A/B/C/D, configure A, B & C and set D to nothing connected.

 

[Sicilian]

Once setup you can scan manually or use Autobouquetsmaker.

 

[loopy123]

Thanks for heads up !please didn't order that .
Why a 3 way switch for 2 diff sat on tuner b
Solo2 vu

 

[world-of-satellite.co.uk]

Sorry mis-read the Tuner A part 2 way would be sufficient. The GT sat switch can be used as a 2 way.

If you have a spare output on the Astra 28.2 LNB you would feed the 3 way switch also, so you could watch and record Astra 28.2 across both tuners.

 

[loopy123]

How would I set up tuner b with 19.2 and 13 on same tuner using autoboque ? Using a 2 way switch ? Simple single basic lmb zone 2 dishs

 

[abu baniaz]

i presume you are talking about the software side. just set as diseqc ab, leave automatic, it will find which LNB is in which port.

The receiver will use whichever tuner is configured for the satellite it needs.