UKCvS AutoBouquets E2 by LraiZer BETA.

[abu baniaz]

Open the plugin the long way, ie Menu > Plugins. Once on the main screen of the plugin, press menu, this opens the settings page. Scroll down until area/ region is highlighted. Scroll right/left to select your area and save. Next time you run it it will use new setting.

 

[mrc]

using granada, but need to set channel bbc 1 2 ITV 4 and 5 first, it comes up with bbc alba ?? how do i change it??

which one do i use?? granada HD or SD??

 

[givecredit]

using granada, but need to set channel bbc 1 2 ITV 4 and 5 first, it comes up with bbc alba ?? how do i change it??

which one do i use?? granada HD or SD??

Turn off Custom swap channels and run again.

 

[chaser]

Sounds like you're using an earlier version of the plugin. I think the HD swap file needed to be updated when some channels were moved around. Grab the latest version of the plugin from this thread or update the HD swap file yourself so the correct HD channels are being swapped. Details are in the included read me file.

You really want to select Granada HD and use the custom swap option if you want the standard channels 1 thru 5 to be in HD.

 

[samhp]

Sorry if this has been asked... i cant read through 77 pages... is there a way to change the order of the bouquets? I want the HD ones at the top.

Thanks

 

[Stanman]

In Bouquets list press menu and enable move mode select and move. Once done menu and disable move mode.

 

[Rob van der Does]

Is the most actual version still in post #1?

 

[mrc]

Getting this error, anyone know what it means??

terminate called without an instance of std:ut_of_range

 

[abu baniaz]

Is the most actual version still in post #1?

Latest version is 201303010205.

 

[LraiZer]

Is the most actual version still in post #1?

yes, but there was a later autobouquets binary that fixed missing ROI itv channels "AB_201303010205_ROI_ITV(fix_mipsel-sh4).rar", and the custom.txt will be out of date with old BBC channel swap numbers.

the next version is not to far off complete, there is an unfinished debug test version that i could post for you to test.
it has a few extra menu items that would need adding to your recent vix skin mods.

if you want, i can post a current debug test version here so you can try the new proposed menu items?

 

[Rob van der Does]

if you want, i can post a current debug test version here so you can try the new proposed menu items?

Yes, please, do so. Thanks in advance.

 

[LraiZer]

debug testing version: work in progress!
backup you bouquets first, as you are using this testing version at your own risk of losing your current bouquets

backup your current /usr/lib/enigma2/python/Plugins/Extensions/AutoBouquets folder and replace with this one,
chmod 755 autobouquetsreader and autobouquets_e2.sh
restart engima2 to initialize plugin.

dvbsnoop dependency has now been removed, so you dont need to install dvbsnoop to test this.
tuner setup can be changed at top of autobouquets_e2.sh.
new option to add extra channels to 'Other' bouquet, also adds testing channels.
custom_swap.txt should handle channel positions below 101 and above 999 now.

supplement.txt file not implemented yet in this version.
custom_order1.txt file not implemented yet in this version.

let me know if about screen is ok with regards to gpl or if it need changing in any way?

 

[Rob van der Does]

Hmmm, screen hangs at 'AB is initializing your system, please wait.....'
Of course I obeyed that order, but after 10 minutes I found it enough......

[AutoBouquets] fallback to default translation for AutoBouquets E2 for 28.2E
Console: executing in run 0  the command: /usr/lib/enigma2/python/Plugins/Extensions/AutoBouquets/autobouquets_e2.sh 4101 01 N N N Y N N Y N N Y 2
---- opening lame channel db
reading services (version 4)
loaded 12292 services

And that's all (apart from the fact that AB continuous to use some 50% CPU).
After init 4/3 it turned out that my first bouquet (not created by AB) was gone.

 

[LraiZer]

hmmm...thats a new one, the initializing part of the script has been in last few versions without a single bug report like yours. i just tried deleting my lamedb and then ran the plugin again and it displayed 'AutoBouquets is initializing your system, please wait.....' as you say, but it then auto created a new lamedb and auto zapped to the preset service before continuing the scan for bouquets 60 seconds later just as it should have done.

did you already have 28.2e bouquets on you system and were you viewing a valid 28.2e channel when you ran the plugin?
what was your setup when this happened so that i can try to replicate this also?

you should be able to bypass this for now by turning off the scriptcheck option and zapping to a valid 28.2e channel before running the plugin while i look into it.


if anyone else has had this issue in this verison or earlier versions, let me know, thanks.

 

[Rob van der Does]

1- The previous version (enigma2-plugin-extensions-autobouquets-e2_201303010205_mipsel.ipk) worked OK;
2- I do have my own 28.2 bouquet;
3- I was watching a channel on 19.2E when I activated the plugin.

 

[LraiZer]

so can you confirm that you can watch 19.2E using the 201303010205 version and it will auto zap to the default 28.2E service and scan for bouquets?
but if you use the debug testing version, and the exact same set of bouquets and lamedb that worked with the 201303010205 version. when you watch 19.2E it does not zap to the default 28.2E service, and instead of attempts to initialize your system even though it already has a working set of 28.2E bouquets and lamedb?

i will have to look at any subtle differences between the previous initialization code and what is in the debug testing version as both seem to work just the same on my test box, thanks for the feeback.

 

[Rob van der Does]

so can you confirm that you can watch 19.2E using the 201303010205 version and it will auto zap to the default 28.2E service and scan for bouquets?

I'll test that tomorrow.

 

[LraiZer]

thanks, to be on the safe side, i may revert to the original method of earlier plugin versions by just popping a msg to user, asking them to zap to active 28.2e channel before any further processing can be done instead of attempting to auto initialize the system for them. i do not want to have this feature, if it only works 99%.

 

[abu baniaz]

The 20130301 version zaps to the sky intro channel and then back without a problem, always has for me.

My test to re-confirm this was done as follows: Transferred a channel list for hotbird only, restarted the receiver. Whilst on a 13 east channel, executed AB via blue button. Was fine. Repeated and used AB via main plugin screen, also fine. This was with the following tuner config.
Tuner 1, single, 28.2
Tuner 2, diseqc 13/28.2/none/none
TM Twin, build 706

Repeated with the following tuner config
Tuner 1 = not configured
Tuner 2 = Simple,positioner

This time it had error 145 connection time out as dish did not move quickly enough. After it finished. I quickly executed again and this time it completed OK and zapped back to the 13 east channel.

Is it possible to add a confirm is on 28.2 service check before progressing to next step?

 

[abu baniaz]

Version 201307281450 was tested. This went fine. However, this was a cursory one which went well. Not sure if the following would apply to it too.

Version 201307301500 was tested after removal of 20130301. Only hotbird list present. Tuner as motorised and other disabled. Executed whilst on a 13e channel.
It did not progress, it said dvbsnoop not found. This was the same with/without scriptcheck. It did however go to channel "999", but no picture.

Installed dvbsnoop and repeated. I encountered similar issue as Rob.

Re-enabled 28.2 input and executed whilst on 13e channel having transferred Vhannibal list and rebooted. Progressed and finished in 49 seconds. Hiccup, the activity window did not close. Not sure if Version 201307301500 self closes, but 20130301 does. After pressing OK plugin screen was shown and it zapped back to 13e channel by itself.

Executed via blue button whilst on 13e channel (28.2 tuner active at time of test). Corner popup came up, channel stayed on 13e. No progress. After 5 mins I restarted the receiver.


Next test:-
Switched to 28.2 channel and executed via blue button. Seems as it ran OK as log was generated and pop up window closed.