Viewing 3 Satellites on 80cm non Motorised Dish

[bigbaz]

Good evening all,

I am hoping you can point me in the right direction regarding the following,

I have an 80cm dish not motorised, Octo LNB currently at 28.2E. Connected to both tuners A & B on VU+Solo2 (VIX) in one room and tuners A & B on VU+ Duo (VIX) in another room.

*I would like to add KA Band LNB at 9E and another Quad LNB pointing at 13E Eutelsat Hotbird, firstly will this option work on the setup mentioned above?
*If this option works, how do I get all bouquets for all sat's on both boxes to show and work correctly on the boxes? I'm not sure how to do this.

Thanks in advance.

Regards,
Baz.

 

[delboy1]

hello bigbaz,
i beleave your asking to much of your little 80cm dish.
you would be better off looking at changing your dish to a twin dish / toroidal / wave frontier type dish.
each lnb is a prime .

 

[delboy1]

bigbaz,
on my T90 twin dish i have 28e 23e 19e 16e 13e 7e 1w
there is a T90 and a T55 size dish depends what 9e needs

depending where you are and if you do look for a T90.
i am selling one.

 

[bellejt]

normally this should work if you are satisfied with not the max db reception.My 88 cm dish from triax with a gibertini multirail does it.Ik have 4 sats 13-19.2-23.5-28.2 E and plenty of room on the sides for the 9E on the side.Reception however will not be fully on all transponders and probably no rain reserve.Why not put a second disch beside or above the first one ? Or a Txx dish.

 

[marty]

Isn't it easy just to fir a motor?

 

[bigbaz]

thanks for all your replies, I ended up putting a 60cm beside my 80cm dish and have now both astra and Hotbird..