[ET9x00] ViX Team ET9x00 Image v2.3 -07/12/2011

[Sicilian]

I am NOT trying to pick a fight here but that is a lame explaination.
How the hell is a newbie supposed to be able to pick that up.
This thing was beta tested for so long that surely that should have been checked.
As for the fan control plugin they are now up to version 3 not 2. something.

Heres a good example of posting about an issue http://www.world-of-satellite.com/s...-keeps-freezing-on-random-interval-on-Vix-2-3

The member who reported the issue was calm and it was dealt with in a calm reasonable manner Thank you Aslain for reporting the issue in the way that you did and for being patient with us

 

[Aslain]

The member who reported the issue was calm and it was dealt with in a calm reasonable manner Thank you Aslain for reporting the issue in the way that you did and for being patient with us

You are welcome Sicilian. I was a betatester in many different projects (game betatesting mostly), I know the drill more or less I could do it better, with more details, but I was kinda busy last days.

Yes, works flawless on all boxes.

Could you give any hints what to check on my box? Because it's not working here on my ET9000, I can even record a short video on my cell to show you all. Like I wrote before, I press a number key, it shows me this number in a center of screen and turns off after few secs, nothing further happens.

I'm on default ViX 2.3, didnt change anything expect for setting up things like tuners, cams, and epg importer.

 

[Rob van der Does]

Could you give any hints what to check on my box? Because it's not working here on my ET9000, I can even record a short video on my cell to show you all. Like I wrote before, I press a number key, it shows me this number in a center of screen and turns off after few secs, nothing further happens.

I'm on default ViX 2.3, didnt change anything expect for setting up things like tuners, cams, and epg importer.

Sorry, I have no idea why it doesn't work for you. It works fine here on DUO, UNO, ET5x00 and ET9x00.

 

[Aslain]

Ok, check this out:

 

[andyblac]

Could you give any hints what to check on my box? Because it's not working here on my ET9000, I can even record a short video on my cell to show you all. Like I wrote before, I press a number key, it shows me this number in a center of screen and turns off after few secs, nothing further happens.

I'm on default ViX 2.3, didnt change anything expect for setting up things like tuners, cams, and epg importer.

does this happen on FTA channels ?, could you turn on Debug Log (found in Setup --> System --> Logs)

restart GUI, try changing a few channels (FTA) then me the log via Log Manager.

thanks
andy

 

[bassethound]

@Aslain

Have you tried changing the battery's on the remote i have had the similar problem in the past with flat battery's

the et models seem to use battery really quick

 

[Aslain]

@Aslain

Have you tried changing the battery's on the remote i have had the similar problem in the past with flat battery's

the et models seem to use battery really quick

Yes I have. It's not battery problem I guess, as it allows me to enter channel numbers so it's fine. All keys remote working for sure.

You probably refering to my video, I simply pointed my remote to wrong directions this is why it didnt showed the numbers, when I directed it a little down it worked - simply I was too close to screen

@andyblac
I will check on FTA and send you debugging logs

 

[Rob van der Does]

What happens if you press "OK" directly after typing the desired number?

Oh, btw, you don't have to "prove" yourself: I think we all believe you. It's just the problem that nobody seems to be able to reproduce this.

 

[Aslain]

What happens if you press "OK" directly after typing the desired number?

Oh, btw, you don't have to "prove" yourself: I think we all believe you. It's just the problem that nobody seems to be able to reproduce this.

I know, I just wanted to show it for you

- When I enter a channel number it shows me current infobar for a couple of seconds only.
- If I enter a channel number + press OK, it does nothing at all.

Oh btw. I cant see a channel number on infobar, is that suppose to work like that? hence:

[...]
action -> InfobarShowHideActions hide
warning, skin is missing element channel in <class 'Screens.InfoBarGenerics.NumberZap'>
action -> SetupActions ok
action -> InfobarShowHideActions hide
[...]

 

[Aslain]

The same happens on english lang.

 

[toxic]

Hi , guys, finally , my favorite Image, works like a charm! thx guys!!!

 

[halflife]

very good image, thanks a lot! but I have a problem with my dvbt usb stick. it has chipset it9135. I was download drivers from server. after install and reboot, I have file "dvb-usb-it9135.ko" in /lib/modules/3.1.0/kernel/drivers/media/d
vb/dvb-usb. then I was transfer firmware "dvb-usb-it9135.fw" in lib/firmware, give right 755. everything seams good, I can get epg data from dvb-t transponder, but no signal and no picture. and ofcourse, no dvb-t tuner in tuner list.
here what I get from dmesg:
dvb-usb: found a 'ITEtech USB2.0 DVB-T Recevier' in cold state, will try to load
a firmware
dvb-usb: downloading firmware from file 'dvb-usb-it9135.fw'
IT9135: This is IT9135 chip v1
IT9135: ~~~ .Fw file only include Omega1 firmware, Scripts1&2!!
IT9135: =========================================
IT9135: DRIVER_RELEASE_VERSION: v11.08.02.1
IT9135: FW_RELEASE_VERSION: V1_0_26_2
IT9135: API_RELEASE_VERSION: 203.20110426.0
IT9135: =========================================
IT9135: it9135_device_init success!!
dvb-usb: found a 'ITEtech USB2.0 DVB-T Recevier' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (ITEtech USB2.0 DVB-T Recevier)
DVB: registering adapter 1 frontend 0 (IT9135 USB DVB-T)...
dvb-usb: ITEtech USB2.0 DVB-T Recevier successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_it9135

on pli image 3.1.0. everything works fine. please help me cause without dvb-t usb working, I cant use this wondeful image.

 

[andyblac]

very good image, thanks a lot! but I have a problem with my dvbt usb stick. it has chipset it9135. I was download drivers from server. after install and reboot, I have file "dvb-usb-it9135.ko" in /lib/modules/3.1.0/kernel/drivers/media/d
ahere what I get from dmesg:
dvb-usb: found a 'ITEtech USB2.0 DVB-T Recevier' in cold state, will try to load
a firmware
dvb-usb: downloading firmware from file 'dvb-usb-it9135.fw'
IT9135: This is IT9135 chip v1
IT9135: ~~~ .Fw file only include Omega1 firmware, Scripts1&2!!
IT9135: =========================================
IT9135: DRIVER_RELEASE_VERSION: v11.08.02.1
IT9135: FW_RELEASE_VERSION: V1_0_26_2
IT9135: API_RELEASE_VERSION: 203.20110426.0
IT9135: =========================================
IT9135: it9135_device_init success!!
dvb-usb: found a 'ITEtech USB2.0 DVB-T Recevier' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (ITEtech USB2.0 DVB-T Recevier)
DVB: registering adapter 1 frontend 0 (IT9135 USB DVB-T)...
dvb-usb: ITEtech USB2.0 DVB-T Recevier successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_it9135


on pli image 3.1.0. everything works fine. please help me cause without dvb-t usb working, I cant use this wondeful image.

to install the usb tuner helper

opkg install usbtunerhelper

and reboot

 

[roomen]

How can I edit the path of picons to usb

 

[punisher]

Just move them over to your usb path /picons and delete them from whereva else they may be stored. The image will auto detect it

 

[Rob van der Does]

Just move them over to your usb path /picons and delete them from whereva else they may be stored. The image will auto detect it

Correct, and make sure not to leave the empty picon-folder behind.

 

[halflife]

opkg install usbtunerhelper

that's it! now everything works fine

 

[halflife]

I was some bug in plugin cccam.info. when I start it, box cant receive any command from remote ( forbidden sign ). only solution is restart e2 with telnet command or with web interface

 

[Rob van der Does]

I was some bug in plugin cccam.info. when I start it, box cant receive any command from remote ( forbidden sign ). only solution is restart e2 with telnet command or with web interface

I tried CCCamInfo, but couldn't reproduce it.
As you speak about a plugin: is your problem with the CCCamInfo that was on the box by default, or did you install a plugin yourself? If the latter is the case: don't.

 

[Torsven]

Dear Buddies,

I hereby appreciate all your efforts regarding image improvement and I'm pretty grateful that you guys support ET9000,

I've first flashed new BootLoader '' ET9X00 '' & then flashed the new Image , Everything is perfect upon restarting the box,

When I restart the box (but not Enigima) or deep-standby and then try to turn it on ,, It wouldn't boot , couple of blue blinking on the power button and then ET9X00 will appear on the front LCD-display and I'll just have the first Linux-tv logo as a video signal , The Box wouldn't boot-up and I need to re-flash the Image(2.3) again in order to boot the box ,,, the box works in order as long as I don't shut it down , and every time I need to turn it on to boot the box I have to flash the new vix image .

Therefore I would be thankful of you could assist me resolving the fault of the box (or image/bootloader) , I've also tried to downgrade the bootloader
& image to et9000 & 2.21 but failed.

Any idea ,technical help , suggestion or advisement will be of course highly appreciated .

Thank you beforehand.

Regards