[CrossEPG-Config] Crossepg hangs on reading titles - help please

[judge]

and, did it work?

 

[manikm]

No
- well i say no, it just takes 4 EVER!!!!!!!!!!!!! epg does get populated, but takes 25 mins


Sent from my GT-I9300 using Tapatalk

 

[judge]

- well i say no, it just takes 4 EVER!!!!!!!!!!!!! epg does get populated, but takes 25 mins

So, it does work, but something in your setup is slowing it down.
How many feeds have you from the fixed 28.2 dish?
Can you enable those only & try again?

Atleast now, we are finally getting some debug logs, thanks.

 

[manikm]

yes, correct.

i have 2 feeds from sky LNB, one goes to upstairs azbox (when r u going to support them!) and one to tuner b of xtrend. (only because blind scan doesnt work on tuner b which is no good if u have a motor setup)

i did only enable the one tuner on last log, that was with tuner b (sky) configured only.

 

[manikm]

BREAKTHROUGH - through all this frustration, ive just installed the latest ALLIANCE image, and guess what! SAME THING HAPPENS!!!

GRRR!!! im cursed.

At least its not the image, just crossepg at fault.

 

[judge]

Just for comparrison, a debug log of fixed 28.2 dish, 2 feeds, CrossEPG only downloading OpenTV 28.2E.
Working perfectly every time, probably have done 100+ blue button -> Cross EPG Downloader since the recent EPG updates, just to test this issue.

 

[judge]

yes, correct.

i have 2 feeds from sky LNB, one goes to upstairs azbox (when r u going to support them!) and one to tuner b of xtrend. (only because blind scan doesnt work on tuner b which is no good if u have a motor setup)

i did only enable the one tuner on last log, that was with tuner b (sky) configured only.

again, why couldn't you have mentioned this 20+ posts ago...
wasting each others time here, thanks for the debug logs, but I'm finally out.

 

[sunday96]

Like I said in my post earlier, the problem seem to only affect my ET9200. I have a VU Solo and VU+ Duo2 that works well after upgrading from 775 to 778. Attached is the log from my ET9200 on 28.2 on a fixed dish.

 

[manikm]

again, why couldn't you have mentioned this 20+ posts ago...
wasting each others time here, thanks for the debug logs, but I'm finally out.

a) you didnt ask
b) i dont see why its THAT relevant
c) if we were wasting each others time, you wouldnt have find the VERY useful information i have taken time out to give you
d) you now have some logs to go on that you was so badly seeking.

i think thats time very well spent judge arrogance.

 

[sunday96]

Just for comparrison, a debug log of fixed 28.2 dish, 2 feeds, CrossEPG only downloading OpenTV 28.2E.
Working perfectly every time, probably have done 100+ blue button -> Cross EPG Downloader since the recent EPG updates, just to test this issue.

And are you using Xtrend box? Seems to an Xtrend box issue. My Technomate, Solo and duo2 works fine after upgrading to 778. They weren't working on 775 though.

Sent from my GT-I9505 using Tapatalk

 

[sunday96]

No
- well i say no, it just takes 4 EVER!!!!!!!!!!!!! epg does get populated, but takes 25 mins


Sent from my GT-I9300 using Tapatalk

Are you sure it is not being populated from your old epg data? Did you delete the old epg data before downloading?

Sent from my GT-I9505 using Tapatalk

 

[manikm]

yes mate did indeed

 

[manikm]

yes im inclined to agree, theres vu+ people happy with it

its either my tuner setup (fixed on b) and motor on a - or something xtrend 9200 specific stuff going on.

as i said, happens on Xtrend Alliance also which also has crossepg 0.7

 

[judge]

a) you didnt ask

When reporting any issue, it's taken that all relevant info will be given. Nobody can guess your configs.

b) i dont see why its THAT relevant

Tuner set-up & configs, not relevant when reporting issues? beyond me, sorry.

c) if we were wasting each others time, you wouldnt have find the VERY useful information i have taken time out to give you

Not a complete waste, atleast we now finally have some debug logs, just a waste of my time by not knowing relevant configs earlier.

d) you now have some logs to go on that you was so badly seeking.

i think thats time very well spent judge arrogance.

Yes, we do, thank you & please forgive the arrogance of you not posting basic details earlier.

 

[judge]

And are you using Xtrend box? Seems to an Xtrend box issue. My Technomate, Solo and duo2 works fine after upgrading to 778. They weren't working on 775 though.

Sent from my GT-I9505 using Tapatalk

EXT400, TMTwin, TM2T, GBQuad, VU Solo2 all working fine.

 

[sunday96]

EXT400, TMTwin, TM2T, GBQuad, VU Solo2 all working fine.

I think the problem is with ET9200 then. My Technomate, duo2 and solo works great as well.

I just hope it can be fixed as not every box has this issue

Sent from my GT-I9505 using Tapatalk

 

[sunday96]

yes im inclined to agree, theres vu+ people happy with it

its either my tuner setup (fixed on b) and motor on a - or something xtrend 9200 specific stuff going on.

as i said, happens on Xtrend Alliance also which also has crossepg 0.7

Looks like Xtrend stuff from all indication...I don't think it has to do with your setup

Sent from my GT-I9505 using Tapatalk

 

[manikm]

Yer cheers. Maybe not many people with same tuner configuration I guess if someone else can plug their 28.2e connection into tuner b and test that might help

Sent from my GT-I9300 using Tapatalk

 

[sunday96]

Yer cheers. Maybe not many people with same tuner configuration I guess if someone else can plug their 28.2e connection into tuner b and test that might help

Sent from my GT-I9300 using Tapatalk

I have two cables from 28.2 with one connected to tuner b and the other connected to tuner a and I still experience the same issue.

Sent from my GT-I9505 using Tapatalk

 

[dude1]

I'll make sure my crash logs are enabled tonight in case of further problems. Is there any personal information in them that should be deleted before posting them on the forum?

Thanks.