[VU+ Solo] Mgcamd needs restart when switching channels

[Djxplod]

Hi, i have VU+ solo with Vix image and using mgcamd 138, eveytime i switch a channel (switching satellite) i have to restart my mgcamd.
i have tried using mgcamd 135a and 138 and facing same problem, when i switch to cccam its working fine.
my mg_cfg settings:
M: { 01 }
C: { 01 }
A: { 02 }
U: { 01 }
T: { 00 }
G: { 01 }
N: { 07 } 5 30
K: { 05 }
Q: { 600 }
P: { 00 }
O: { 02 } root dreambox
S: { 11 } 80
L: { 00 } 10.0.0.2 80 /tmp/mgcamd.log
E: { 15 }
H: { 07 }
R: { 00 }
D: { 00 }
B: { 00 }

any help will be appreciated.

 

[rte]

I have Cccam always starting automatically. If I want Mgcamd I have to start it. Then it stops Ccam because two softcams can't run simultaneously. When the channel is changed it usually stops Mgcamd and starts Cccam again. That is how I have experienced it. Have you got two softcams running?

 

[Djxplod]

I have Cccam always starting automatically. If I want Mgcamd I have to start it. Then it stops Ccam because two softcams can't run simultaneously. When the channel is changed it usually stops Mgcamd and starts Cccam again. That is how I have experienced it. Have you got two softcams running?

no, i have only mgcamd 138 running

 

[rte]

Then the behaviour must be inbuilt in mgcamd.

 

[Martincape]

1.35a is fine on my solo2 pal. Running Zeus19. Try downloading Mr Mister's cfg files pal.

 

[Djxplod]

i doubt it its the cam problem since i tried both the 1.35a and the 138 and in both have the same problem

 

[Djxplod]

1.35a is fine on my solo2 pal. Running Zeus19. Try downloading Mr Mister's cfg files pal.

Mr Mister's cfg files ? can you give a link please ?

 

[stationx]

I am running the same as Martincape solo2 with Zeus 19 and mgcamd 1.35a (because its the version specified for VIX) and Mr Mister cfg (below) and don't have any major issues. Some slight pixilation in small patches on the screen occasionally but that about it.

Mr Mister's cfg

M: { 01 }
C: { 01 }
A: { 01 }
U: { 01 }
T: { 00 }
G: { 33 }
N: { 07 }
K: { 07 }
Q: { 10 }
P: { 02 }
O: { 00 }
S: { 11 } 80
L: { 00 }
E: { 15 }
H: { 04 }
R: { 00 }
D: { 00 }
B: { 06 }


http://www.world-of-satellite.com/showthread.php?24555-original-vu-duo/page2

 

[Djxplod]

I am running the same as Martincape solo2 with Zeus 19 and mgcamd 1.35a (because its the version specified for VIX) and Mr Mister cfg (below) and don't have any major issues. Some slight pixilation in small patches on the screen occasionally but that about it.

Mr Mister's cfg

M: { 01 }
C: { 01 }
A: { 01 }
U: { 01 }
T: { 00 }
G: { 33 }
N: { 07 }
K: { 07 }
Q: { 10 }
P: { 02 }
O: { 00 }
S: { 11 } 80
L: { 00 }
E: { 15 }
H: { 04 }
R: { 00 }
D: { 00 }
B: { 06 }


http://www.world-of-satellite.com/showthread.php?24555-original-vu-duo/page2

i removed 138 and installed 1.35a with mg_cfg settings you gave me
seems to be working fine now :thumbsup:
i'll keep track for few days to make sure
thank you very much

 

[Andy_Hazza]

I'm having same problem on my brothers Vu+ Solo using Zeus 018. Reverted back to ViX 3.0 Build 808 and all is fine again. Will leave Zeus alone for a while as must be a bug in the Solo build.

 

[IAmATeaf]

I'm having same problem on my brothers Vu+ Solo using Zeus 018. Reverted back to ViX 3.0 Build 808 and all is fine again. Will leave Zeus alone for a while as must be a bug in the Solo build.

Have you tried with the above cfg file?

 

[Larry-G]

1.35a is fine on my solo2 pal. Running Zeus19. Try downloading Mr Mister's cfg files pal.

yep exactly the same here, and i have been running 1.35a flawlessly for over 6 months.

 

[saudades]

I got this problem.
softcam key doesn't work when I am using mgcamd . sotcam key only works when I use cccam.
I doesn't work in any of the images available ( openvix-openatv-openpli )
tm- single
thanks

 

[Djxplod]

i have set Mr Mister's cfg it worked for around 12 hours and the problem is back
but now less channels need restart
any improvments i can make to fix this ?

 

[IAmATeaf]

When this next happens can you do a restart of the network on the box and see if the pic comes back without restarting mgcamd. You can restart the network by going into the System menu then Network, the I think Adapter Status but can't be sure as I'm at work at the mo.

The other thing you could try is moving over to Oscam?

 

[Djxplod]

When this next happens can you do a restart of the network on the box and see if the pic comes back without restarting mgcamd. You can restart the network by going into the System menu then Network, the I think Adapter Status but can't be sure as I'm at work at the mo.

The other thing you could try is moving over to Oscam?

why you suspect its network problem ?
and i can try moving to Oscam if the server won't block me,
the reason i'm not using cccam is because the server keeps blocking my user when i use it

 

[Larry-G]

why you suspect its network problem ?
and i can try moving to Oscam if the server won't block me,
the reason i'm not using cccam is because the server keeps blocking my user when i use it

Please be very mindful of the forum rules when replying again, especially the parts covering CS chat.

 

[IAmATeaf]

You can use Oscam with netcamd so shouldn't be an issue.

 

[gothicpsyko]

just wanted to say thx for this amazing MG_cfg

i had always problems with vu+ devices and wondered why such powerfull machines need to restart mgcam all the time or while switching from several dishes like 0,8 to 4,8

this Mg_cfg is the solution for everyone who had problems with cam freezes while switching a channel!

works for me!

mega thx

 

[judge]

just wanted to say thx for this amazing MG_cfg

i had always problems with vu+ devices and wondered why such powerfull machines need to restart mgcam all the time or while switching from several dishes like 0,8 to 4,8

this Mg_cfg is the solution for everyone who had problems with cam freezes while switching a channel!

They don't need to be restarted, just configured properly.