[VU+ Duo] spinning vix on boot screen, not booting

[wambam]

Hi original vuduo bought from WOS about 3years ago .
Was working fine until other night turned off as normal ,flicked the switch at the back next morning ,
boot screen comes on as normal but it just hangs there with a spinning vix logo.
Have tried a fresh usb flash of a few different images ,all say flashing finished remove usb and reboot.
and the boot screen changes picture (to match the version of vix)like it has flashed the image ,
But same problem it just hangs with a spinning vix logo.
I have disconnected HDD, same problem ,as well as removed usb for epg.
anyone any idea what to try next ?
thanks

 

[Andy_Hazza]

You should never keep flicking the receiver off at night. Will do more harm than good. When you have flashed with the new image, do you get the OpenViX boot screen?


Sent from my iPhone using Tapatalk

 

[wambam]

Ok thought flicking the switch was the way to do it...
Yes i get the picture of the field at sunset ,as i've just flashed latest vix.
It shows the field for about 3 mins then a large vix spins in top left corner for about 10 seconds then it changes to a smaller vix and that keeps spinning and keeps spinning and keeps spinning...

 

[Larry-G]

You basically have a Linux computer there, simply powering off should be a last resort as with all computers you should go through the full power off or restart routine unless that is unavailable.


Sent from my iPad using Tapatalk

 

[twol]

You need to turn on debug logs and when its doing the spinning access by telnet from a PC (using eg putty) enter init 4, wait 60 secs and then enter enigma2 and see what the log shows its doing (it will display on your PC screen), if anything

 

[wambam]

Are they on by default the debug logs ? on the latest vix
because it doesn't boot far enough to be able to use the remote to turn them on.

 

[Larry-G]

Are they on by default the debug logs ? on the latest vix
because it doesn't boot far enough to be able to use the remote to turn them on.

No, you have to activate debugging your self.

Sent from my SM-G930F using Tapatalk

 

[wambam]

from putty i get the following :

vuduo login: root
Last login: Tue Aug 2 16:29:00 IST 2016 on pts/0
root@vuduo:~#
root@vuduo:~# init 4
root@vuduo:~# enigma2
[Enigma2] PYTHONPATH: /usr/lib/enigma2/python
[Enigma2] DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
[Enigma2] ENIGMA2_DEBUG settings: Level=4
< 650.357> [eInit] + (1) Background File Eraser
< 650.359> [eInit] + (5) Tuxtxt
< 650.359> [eInit] + (8) graphics acceleration manager
< 650.360> [eInit] + (9) GFBDC
< 650.361> [fb] /dev/fb0: 21600k video mem
< 650.362> [fb] setting /dev/tty0 status failed.
< 650.362> [fb] double buffering available!
< 650.386> [gFBDC] resolution: 1280x720x32 stride=7680, 10800kB available for acceleration surfaces.
< 650.386> [eInit] + (9) gLCD
< 650.386> [eFbLCD] /dev/fb1: No such file or directory
< 650.386> [eFbLCD] framebuffer /dev/fb1 not available
< 650.387> [eDboxLCD] xres=132, yres=64, bpp=8 lcd_type=1
< 650.387> [eLCD] (132x64x8) buffer 0x7cbd28 8448 bytes, stride 132
< 650.387> [eLCD] (132x64x8) buffer 0x833e58 8448 bytes, stride 132
< 650.387> [gLCDDC] resolution: 132x64x8 stride=132
< 650.387> [eInit] + (9) Font Render Class
< 650.387> [Font] initializing lib...
< 650.388> [Font] loading fonts...
< 650.388> [Font] Intializing font cache, using max. 4MB...
< 650.389> [eInit] + (10) gRC
< 650.390> [gRC] thread created successfully
< 650.390> [eInit] + (15) eWindowStyleManager
< 650.391> [eInit] + (20) DVB-CI UI
< 650.391> [eInit] + (20) UHF Modulator
< 650.391> [eRFmod] couldnt open /dev/rfmod0: No such file or directory
< 650.391> [eInit] + (20) RC Input layer
< 650.391> [eInit] + (20) misc options
< 650.391> [eInit] + (20) AVSwitch Driver
< 650.392> [eInit] + (21) input device driver
< 650.393> [eRCInputEventDriver] devicename=dreambox advanced remote control ( native)
< 650.393> [eRCDeviceInputDev] device "dreambox advanced remote control (nativ e)" is a mouse
< 650.393> [eInputDevice] Found 1 input devices.
< 650.394> [eInit] + (22) Hdmi CEC driver
< 650.394> [eHdmiCEC] cannot open /dev/hdmi_cec: Device or resource busy
< 650.394> [eInit] + (30) eActionMap
< 650.394> [eInit] + (35) CI Slots
< 650.396> [CI] scanning for common interfaces..
< 650.405> [CI] Slot 0 setSource(0)
< 650.406> [CI] Slot 1 setSource(0)
< 650.418> [CI] eDVBCIInterfaces->setInputSource(0, 0)
< 650.430> [CI] eDVBCIInterfaces->setInputSource(1, 1)
< 650.430> [CI] cannot open /proc/stb/tsmux/input2
< 650.431> [CI] cannot open /proc/stb/tsmux/input3
< 650.431> [CI] done, found 2 common interface slots
< 650.431> [eInit] + (35) CA handler
< 650.431> [eInit] + (40) eServiceCenter
< 650.432> [eServiceCenter] settings instance.
< 650.432> [eInit] + (41) eServiceFactoryDVD
< 650.432> [eInit] + (41) eServiceFactoryHDMI
< 650.432> [eInit] + (41) eServiceFactoryM2TS
< 650.432> [eInit] + (41) eServiceFactoryMP3
< 650.433> [eInit] + (41) eServiceFactoryFS
< 650.433> [eInit] + (41) eServiceFactoryDVB
< 650.433> [eInit] + (41) Encoders
< 650.433> [eInit] + (41) Stream server
< 650.434> [eServerSocket] ERROR on bind: Address already in use
< 650.435> [eServerSocket] ERROR on bind: Address already in use
< 650.436> [eInit] reached rl 70
< 650.436> [eDVBDB] ---- opening lame channel db
< 650.436> [eDVBDB] can't open /etc/enigma2/lamedb: No such file or directory
< 650.436> [eDVBResourceManager] scanning for frontends..
< 650.438> [eDVBFrontend] opening frontend 0
< 650.438> [eDVBFrontend] frontend 0 has DVB API 50a
< 650.439> [eDVBFrontend] try to close frontend 0
< 650.441> [eDVBFrontend] opening frontend 1
< 650.441> [eDVBFrontend] frontend 1 has DVB API 50a
< 650.442> [eDVBFrontend] try to close frontend 1
< 650.444> [eDVBAdapterLinux] get demux 0
< 650.444> [eDVBAdapterLinux] get demux 1
< 650.444> [eDVBAdapterLinux] get demux 2
< 650.444> [eDVBAdapterLinux] get demux 3
< 650.444> [eDVBAdapterLinux] get demux 4
< 650.445> [eDVBResourceManager] found 1 adapter, 2 frontends(2 sim) and 5 dem ux, boxtype 4
< 650.446> [eDVBLocalTimeHandler] Use valid Linux Time (RTC?)
< 650.446> [eEPGCache] Initialized EPGCache (wait for setCacheFile call now)
< 650.449> [MAIN] Loading spinners...
< 650.498> [ePNG] couldn't open /usr/share/enigma2/spinner/wait20.png
< 650.499> [MAIN] found 19 spinner!
[MAIN] executing main
< 650.499> [setIoPrio] best-effort level 3 ok
< 651.668> [Misc_Options] 12Vdetect cannot open /proc/stb/misc/12V_output: No such file or directory
< 651.690> [Harddisk] enumerating block devices...
< 651.706> [Harddisk] new Harddisk sda -> /dev/sda -> /dev/sda
< 651.707> [eConsoleAppContainer] Starting hdparm
< 651.793> [Harddisk] enumerating network mounts...
< 651.824> [Config] unable to load config ([Errno 2] No such file or directory : '/etc/enigma2/settings'), assuming defaults...
< 652.467> [NimManager] Reading satellites.xml
< 653.813> [NimManager] removing internal link on frontend id 1
< 653.815> [SecConfigure] sec config cleared
< 653.817> [eDVBFrontend] setSlotInfo for dvb frontend 0 to slotid 0, descr BC M7335 DVB-S2 NIM (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes
< 653.817> [eDVBFrontend] setSlotInfo for dvb frontend 1 to slotid 1, descr BC M7335 DVB-S2 NIM (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes
< 653.821> [SecConfigure] slot: 0 configmode: simple
< 653.822> [SecConfigure] diseqcmode: single
< 653.824> [SecConfigure] slot: 1 configmode: simple
< 653.825> [SecConfigure] diseqcmode: single
< 653.826> [SecConfigure] sec config completed
< 653.827> [NimManager] slotname = Tuner A, slotdescription = BCM7335 DVB-S2 N IM (internal), multitype = False
< 653.828> [NimManager] slotname = Tuner B, slotdescription = BCM7335 DVB-S2 N IM (internal), multitype = False
< 653.973> [MovieSelection] Bluray Player is not installed: cannot import name BlurayPlayer
< 654.394> [gRC] main thread is non-idle! display spinner!
< 654.463> [InfoBarGenerics] Failed to load resumepoints: [Errno 2] No such fi le or directory: '/etc/enigma2/resumepoints.pkl'
< 655.149> [eDVBDB] loading bouquet... /etc/enigma2//bouquets.tv
< 655.150> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favourites.tv
< 655.151> [eDVBDB] 0 entries in Bouquet userbouquet.favourites.tv
< 655.151> [eDVBDB] 1 entries in Bouquet bouquets.tv
< 655.151> [eDVBDB] loading bouquet... /etc/enigma2//bouquets.radio
< 655.152> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favourites.ra dio
< 655.152> [eDVBDB] 0 entries in Bouquet userbouquet.favourites.radio
< 655.152> [eDVBDB] 1 entries in Bouquet bouquets.radio
< 655.152> [eDVBDB] Renumbering...
< 655.193> [Time By]: Transponder
< 655.193> [eEPGCache] time updated.. but cache file not set yet.. dont start epg!!
< 656.870> [Image Flashed] 1970-01-01
< 656.886> [Ipkg] Added to OPKG destinations: /
< 657.323> [Font] adding font /usr/share/fonts/Roboto-Bold.ttf -> Regular
< 657.327> [Font] adding font /usr/share/fonts/Roboto-BoldItalic.ttf -> Italic
< 657.329> [Font] adding font /usr/share/fonts/Roboto-Black.ttf -> Bold
< 657.330> [Font] adding font /usr/share/fonts/Roboto-BlackItalic.ttf -> Boldi t
< 657.332> [Font] adding font /usr/share/fonts/nmsbd.ttf -> Subtitlefont
< 657.334> [Font] adding font /usr/share/fonts/lcd.ttf -> LCD
< 657.336> [Font] adding font /usr/share/fonts/ae_AlMateen.ttf -> Replacement
< 657.339> [Font] adding font /usr/share/fonts/tuxtxt.ttf -> Console
< 657.366> [Skin] loading include: /usr/share/enigma2/ViX-Common/CommonSkin.xm l
< 657.857> [Font] adding font /usr/share/fonts/LiberationSans-Regular.ttf -> S ubs
< 657.860> [Font] adding font /usr/share/fonts/LiberationSans-Italic.ttf -> Su bsi
< 657.862> [Font] adding font /usr/share/fonts/LiberationSans-Bold.ttf -> Subs b
< 657.864> [Font] adding font /usr/share/fonts/LiberationSans-BoldItalic.ttf - > Subsz
< 657.871> [Font] adding font /usr/share/fonts/nmsbd.ttf -> FdLcD
< 657.889> [InputDevice] getInputDevices mouse0 <ERROR: ioctl(EVIOCGNAME): [Er rno 25] Inappropriate ioctl for device >
< 657.890> [InputDevice] getInputDevices mice <ERROR: ioctl(EVIOCGNAME): [Errn o 25] Inappropriate ioctl for device >
< 657.963> [Keyboard] Activating keymap: Default (US)
< 657.964> [eConsoleAppContainer] Starting /bin/sh
< 657.990> [Language] Activating language English (UK)
< 659.803> [UserInterfacePositioner] Setting OSD position: 0 720 0 576
< 659.804> [UserInterfacePositioner] Setting OSD alpha: 255
< 659.807> [UserInterfacePositioner] Setting 3D mode: auto
< 659.809> [UserInterfacePositioner] Setting 3D depth: 50
< 659.857> [VideoHardware] setting aspect: 16:9
< 659.860> [VideoHardware] setting wss: auto
< 659.862> [VideoHardware] setting policy: panscan
< 659.864> [VideoHardware] setting policy2: letterbox

 

[wambam]

I can log in via ftp ,even though its not booting ,is there anywhere in there i can check or amend a setting?
where are the debug logs kept in case i can find any?
thanks

 

[wambam]

weekend bump for help